Navpični stroj za oblikovanje, polnjenje in tesnjenje

AMTEC VFFS QUAD S45-S

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, specifically designed for the production of stand-up pouches with a rectangular base and quad-seal (four-side sealing). Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end-sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle rate (idle): 45 cycles/minute; pouch size: length (180-400mm), front width (70-220mm), side width (45-120mm), (double film draw-off possible for longer pouches); suitable film width: 270-620mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 6.5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.9m³/min; dimensions (LxWxH): 2330*1520*2025mm; weight: 850kg. Gjdpfx Ajv Nng Ssd Aetw Please note that our prices for new machines are often below typical used equipment prices. Just send us an enquiry and tell us about your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For machines built to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Stanje: rabljeno, The TREPKO PKG 1 is equipped with a single stage for all stations. The filling head is designed to handle a variety of products, such as yogurt, cream, sauces, milk, 1 cm fruit pieces, vanilla pudding, etc. Thanks to its straightforward maintenance, these machines are highly recommended for production facilities where constant productivity is required. Trepko cup fillers are primarily powered by a main motor that converts movement into an INDEX gearbox and sends signals to the air cylinders, activating them at each station. The filling volumes depend on customer requirements, with the standard volume ranging from 50 to 500 ml per cup. Upon request, we can increase the filling volume by enlarging the diameter of the filling cylinder. The machine was previously used for filling cheese into small rectangular cups. In terms of conversion to cups with an external diameter of 71, 75, 80, and 95 mm, we can provide this service in-house. Please contact us for further information. Capacity: 2,400 cups/hour (40 cups per minute) Gtsdouruf Aspfx Ad Aow Filling volume: 50–500 g Pre-filling: Fruits or flavors Cup discharge: Automatic Lid applicator: Automatic Sealing: Automatic Outfeed conveyor: Automatic Power supply: 3 phase / 50 Hz Control panel: SIEMENS PLC Cup format: Currently rectangular. On request, we can convert to your desired cup size Location: IN STOCK Sale: The machine can be sold “as is” (some maintenance measures still required) or fully refurbished. Contact us for more details.

Leto izdelave: 2025, stanje: novo, Vertical packaging machine, specifically designed for the production of stand-up pouches with a rectangular base and quad-seal (4-edge sealing). Equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: maximum machine cycle rate (no load): 45 cycles/minute; pouch size: length (150-350mm), front width (60-190mm), side width (40-100mm), (dual film draw-off for longer pouches possible); suitable film width: 240-520mm; product contact parts made of AISI 304 (optional upgrade to AISI 316 available for an additional charge); power supply: 220V, 50/60Hz; power consumption: 6kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2020*1440*2130mm; weight: 780kg. Gtsdpfx Adov Nngro Aew Please note that our new prices are often lower than the usual prices for used machines. Feel free to contact us with the details of your packaging requirements. Typically, we have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Kompletna linija za proizvodnjo sira – visokokakovosten poltrdi sir Ta popolnoma integrirana proizvodna linija, vključno z nadzornimi in električnimi sistemi, je bila inženirsko načrtovana in konstruirana s strani Asepto Germany ter izdelana pri ASTA Eisman Germany v sodelovanju s Schwarte. Linija je opremljena z nadzornim sistemom Siemens S7 in barvnimi dotikalnimi HMI upravljalnimi paneli za natančno in uporabniku prijazno upravljanje. Linija je bila nameščena v tovarni, ki še ni bila v celoti operativna, ter je bila v letih 2015 do 2023 uporabljena minimalno, predvsem za demonstracije, kar zagotavlja ohranjenost in dolgo življenjsko dobo. • Leto izdelave: 2015 • Teža sira: 4–5 kg in 10–12 kg Gtodpfx Asxnyr Hjd Asw • Vrste sira: Poltrde sorte, vključno z Goudom, Edamom in podobnimi Ta proizvodna linija ponuja takoj pripravljeno, zanesljivo rešitev za proizvodnjo visokokakovostnega sira z minimalnimi dodatnimi posegi pri namestitvi.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Ločeno krmiljenje za glavni pogon in transport folije. Siemens S7 krmiljenje. Siemens touch zaslon. Krmiljenje transporta folije s fotocelicami. Vročinsko tesnjenje: prečno in vzdolžno. Miza za lepljenje folije. Naprava za bočno zgibanje. Stroj je zdaj opremljen z najsodobnejšim Siemens S7 krmiljenjem! Glej video: youtube: VP220 pakirni stroj, shorts. Gsdpfx Aovk Rv Sjd Aetw

Stanje: rabljeno, Leto izdelave: 2022, Kartonirka vključno z napravo za vroče lepljenje. Naprava ima malo obratovalnih ur. Primerna je predvsem za izdelke, ki jih je mogoče vstaviti v karton s strani. Gtedovb E Evjpfx Ad Asw

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 400 l, The 400L steam cooking kettle, designed by Process Agro, is an ideal piece of equipment for food industry professionals looking to increase their production capacity. With its 400-litre capacity, it allows for the quick and efficient cooking of a wide variety of products. The use of steam ensures uniform cooking while preserving the flavour and texture of the ingredients. Therefore, this kettle is particularly well-suited for recipes that require precise temperature control. Additionally, its robust and reliable construction guarantees long-term use, even in demanding production environments. As a pre-owned unit, this kettle combines high performance with cost efficiency, making it a profitable choice for companies aiming to optimise their cooking processes. Furthermore, its ease of integration into various production lines helps to enhance productivity without compromising product quality. In summary, the 400L steam cooking kettle offers a high-performance solution for food processing businesses that require efficiency, quality, and reliability in their cooking operations. Gjdsu H Uznopfx Ad Astw Technical specifications: - Steam cooking kettle, 400 L - Pre-owned steam kettle - Manufacturer: Process Agro - Capacity: 400 litres - Year of manufacture: 2018

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 10 h, !! Nous sommes heureux de vous conseiller !! Désignation du modèle ////: Rotection Cartonneuse Gtedpor E Dpaefx Ad Aew Caractéristiques ////: Alimentation à double servomoteur, avec station de collage à chaud, capot de sécurité et dispositifs de sécurité Orientation de production ////: Horizontale Système de convoyeur ////: Convoyeur à godets Alimentation des cartons ////: Par le dessus avec bande transporteuse active Afficheur opérateur ////: Écran tactile Entraînements & Commande ////: 8 servomoteurs et commande API Longueur de boîte ////: 150-300 mm Largeur de boîte ////: 120-260 mm Hauteur d’emballage ////: 50-100 mm Vitesse ////: 40-60 boîtes/min en fonction de la taille de la boîte et du poids du produit Recommandation de boîte en carton ////: Boîtes pré-pliées, 250-350g/m³ Consommation électrique ////: Environ 9,5 KW Alimentation électrique ////: 380 V / 50 Hz/ 3 phases Poids de la machine ////: Environ 1000 kg Dimensions de la machine ////: Environ 4257 x 1605 x 1823 mm Matériau de la machine ////: "Inox 304 avec traitement de surface" Station de collage à chaud ////: Requise, options Nordson ou Robatech

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, A Rovema vertical form fill seal machine, including an Ishida CCW-S-211 multihead weigher, is available. Bag dimensions (W/L): 220 mm / 340 mm, packing capacity: 55 bags/min, operating hours: 35,554 h. Documentation available. On-site inspection possible. Gtsdpjw H At Tefx Ad Aew

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, A Rovema vertical form fill and seal machine, including an Ishida CCW-S-211 multihead weigher, is available. Packaging capacity: 80 bags/min, bag dimensions (W/L): 250mm/350mm, max. film width: 530mm, machine dimensions (W/D/H): approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14,607h. Documentation is available. On-site inspection possible. Gtsdpfx Adow H Audj Asw