števec

AMTEC LEG-COUNT-SHWR

Stanje: dober (rabljeno), številka stroja/vozila: HE-14804, Here we offer an incubator. Volume: 409 liters Manufacturer: Heraeus Dimensions (W x D x H): 74.5 x 79 x 181 cm Gedpfx Asc N N Rcofqsbg Internal dimensions (W x D x H): 55 x 55 x 136 cm Nominal temperature: 70°C Connection: 230V, 50 Hz, 3.7 A Weight: approx. 157 kg Type: B 6420 Condition: used Scope of delivery: (see pictures) (Subject to technical modifications and errors. All information is given without guarantee!) If you have further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Forming depth: 12 mm, working area: 100x70 mm, max. roll diameter: 250 mm, speed: 1–30 cycles/min, supplied with documentation, the machine has never been used. Gjdpfxsn R Nhfs Afqsbg

Stanje: rabljeno, Heraeus Incubator Brutschrank B 6420 Volume: 409 L Temperature range: 5° - 70°C Mobile on castors Gbjdpfx Asf E N S Ujfqeg Dimensions (LxWxH): 75 x 79 x 181 cm Weight: approx. 160 kg For further technical details, please refer to the image.

Stanje: pripravljen za uporabo (rabljen), Table diameter: 1000 mm, tool height: 80 mm, sealing pressure: 1.6 t, number of stations: 4, connected load: 3 kW, including tooling, machine has seen very little use. Gbodpsif Elgjfx Afqog

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Counting performance: Tablets: 2,600/h, Capsules: 800/h, Containers: 30/h. Batch capacity: 10,000 units. Material: Stainless steel. Machine dimensions (L/W/H): approx. 900 mm / 700 mm / 660 mm. Weight: approx. 40 kg. Documentation available. On-site inspection possible. Gbodpfx Ajvzbhyofqeg

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block-bottom bags, or flat bags. Modules for specific pouch features such as zip/pressure closure, screw cap (spout), and gusset shape can be integrated; optional: batch/date printer, gas flushing module. Bag detectors check for correct placement and full opening of the doypack pouch. Immediately after detecting the pouch, the product is dispensed into the bag via the filling nozzle. The seal area is kept clean throughout this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. Specifications: stainless steel housing (SS304); max. machine cycle speed (idle): 7 cycles/minute; bag width: 100–300 mm; bag length: 100–350 mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, single-phase, 1 kW; machine dimensions: L1754×W510×H1617 mm. Gjdpfx Afjv Nllloqjbg Please note that our new equipment prices are often lower than typical used equipment prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approximately 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, high-speed version with continuously operating rotary sealing jaws, suitable for flat bags and gusseted bags, equipped with MITSUBISHI PLC, WEINVIEW touchscreen control monitor, automatic program setup, registration mark sensor, quick-change forming unit, servo-driven sealing unit, servo motor for film transport, double feed possible. - Specifications: Bag size: L(50-300)xW(50-240)mm (single pulling); film width: 130-510mm; max. machine cycle rate (no load): 180 cycles/min; stainless steel; 380V/9.0kW; 6 bar, 0.25m³/min; machine dimensions: L1700xW1300xH1700mm; weight: 700kg. Godpfx Afev Nmydoqobg Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – Typically, 30–50 different new machines are available ex stock for immediate delivery. For customer-specific builds, we offer very short delivery lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, VFFS machine for the production of doypacks with zipper, including 4-head linear weigher. Equipped with: touchscreen, PLC, photo sensor (registration mark detection) for sealing/cutting position, pneumatic sealing unit for end sealing, servo motor for film draw-off, thermal transfer printer for batch number, date, and best-before date. VFFS Machine Specifications: Gbsdpfev Hpfksx Afqsg Max. machine cycle rate (idle): 35 cycles/min; 2 form sets for pouch sizes: approx. L 210mm & 300mm, approx. W (70-300)mm; Suitable film width: 280-720mm; Product-contact parts made of AISI304. Weighing Unit Specifications: 4 weighing heads; Weighing range: 50-2000g; Weigh hopper volume: 3L; Product-contact parts made of AISI304. New and with warranty. Available immediately from Reinbek.

Leto izdelave: 2024, Stanje: novo, Slow-running beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 180 Rotor speed (rpm): 150 Drive (kW): 3 Number of rotor knives: 18 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 140 The slow-running beside-the-press granulators of the GSL series are primarily used in injection moulding and blow moulding for inline size reduction of sprues and defective parts. With various hopper and extraction systems available, these machines can be flexibly integrated into existing installations. GSL 180 For granulating sprues from injection moulding and blow moulding processes Highlights of the GSL series: - Low noise operation due to the rotor’s low speed, inclined cut, and a multi-layer, sound-insulated hopper in sandwich construction - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife change The slow-running beside-the-press granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm up to 430 mm. The rotor consists of individual discs directly connected to the spur gear via an oversized drive shaft, ensuring efficient and low-maintenance power transmission. The material to be granulated can be fed manually, via conveyor belt, or by robot through the generously sized, sound-insulated hopper with sandwich construction. As standard, the granulator is mounted on a low base frame with swivel castors. Discharge is via a suction pan mounted under the screen, with a pipe connection for a suction conveyor. Applications Gsdpsqmik Iofx Afqsbg The slow-running beside-the-press granulators of the GSL 180 series are specifically designed for granulating sprues generated in injection moulding and blow moulding applications. The easy accessibility of the machine allows for quick colour and material changes. The low rotor speed also enables the processing of both soft and hard materials, guaranteeing high-quality material output with minimal dust.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Diverse, Complete can filling line Excellent condition! We used the system for slightly moist and sticky pipe tobacco. It can therefore be used for all free-flowing products, such as spices, nuts, seeds, gummy bears, and many other types of foodstuffs. All components of the system have been coordinated by an experienced team and used as a complete line. If you want to fill slightly free-flowing products into cans or even first into bags and then into cans (both possible), this is the perfect system for you. The system can fill into tubular bags as well as directly into cans. The entire line has a capacity of 30 cans/minute. Some components, such as the capping machine and the labeling machine, even have significantly higher throughput. Adapted for 400 ml cans; we used Obeck and Polipack and both ran flawlessly. Other can formats are possible—the system can be adapted for this (extra costs apply). The line consists of: Gbedpfx Afex Arbvoqog - 14-head multihead weigher with working platform: 1.9 m x 1.9 m x 1.8 m, incl. ladder and safety guard, plus automatic product feed from Hangzhou Zon Packaging (don’t let the manufacturer discourage you; spare parts supply is excellent and the system runs extremely reliably!) - Vertical form fill and seal machine with Siemens control from Hangzhou Zon Packaging - Can filling module from Wellman Anlagentechnik GmbH - Can denester from Tölke with automatic can feed (cans can be loaded in cartons) - Capping machine from Bosch with automatic lid feed (lids can be loaded in cartons) - Labeling machine for lid and side labels from Herma Alternatively, we can also offer a screw conveyor for product feeding, allowing the product to be filled directly from Eurobins and automatically dispensed. Some of the system components can also be purchased separately.