Diskovne brane

Amazone Catros 5000-2

Stanje: novo, Screw compressor with refrigerant dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic control system. Efficient compressor stage. Perfect solution for industrial and craft enterprises. Convincing compressed air quality. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerant dryer: Integrated, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Psdpfjwm Ih Ajx Agxopr Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Motor nominal power; IP55: 7.5 kW Oil quantity: 3.2 liters Pressure dew point of dryer (20°C 100% RH): approx. +3 °C Installation data: Ambient conditions min. / max.: 1 / 46 °C Δ T over cooling medium temperature: 2 °C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / PH / Frequency: 400 / 3 / 50 V / Ph / Hz Dryer power rating (230V/50Hz): 0.27 kW Dimensions and weight: Length x Width x Height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" female thread Air receiver volume: 270 liters INCLUDED OPTION: Aftercooler C43 MINI (reduces condensate formation to a minimum)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen Podjtr U Hlspfx Agxepr → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: dober (rabljeno), Premer struženja nad ležiščem: 280 mm Premer struženja nad suportom: 170 mm Dolžina struženja: 600 mm Teža stroja ca.: 400 kg Podjyz Dg Rspfx Agxopr Premer vretena: 26 mm Hitrosti vrtenja: 55-2000 min⁻¹ Skupna potrebna moč: 1,4 kW Zahtevan prostor ca.: 1,5 x 0,8 x 1,3 m Vključuje brusilni suport EMCO SOD Vključuje 4-čeljustno stružno glavo EMCO Vključuje strojne noge Vključuje menjalna kolesa

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Pedjttah Rjpfx Agxjpr Images show new machine

Stanje: dober (rabljeno), Tailstock Quill size: MT 2 Quill stroke: 30 mm Ppodpfxedlp Txo Agxor Height adjustable Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 372 h, vrsta goriva: dizel, proizvajalec motorjev: 4045HP551-SV, Intended use: Construction Unladen weight: 2,960 kg Generator output: 110 kVA Water tank capacity: 1,100 l Transport dimensions (L x W x H): 3,640 x 1,200 x 2,295 mm Please contact the Sales Department for further information. Over 85 years of sales experience in the Netherlands. An expert team dedicated to providing tailored solutions for your requirements. 1,000 hours or 1-year warranty: maximum peace of mind. Available 24/7, seven days a week. Fast service. Psdowgvq Eopfx Agxspr Large stock, immediately available.

Stanje: novo, Anzahl der Räder (Stk): 4 Raddurchmesser: 120 mm Radbreite: 60 mm Vorschubgeschwindigkeit: 3,5 / 5 / 7 / 10 / 12,5 / 16 / 25 / 32 m/min Motorleistung: 750 W / 550 W Maschinenrahmen: Aluminiumguss Vorschubrichtung: Vorwärts / Rückwärts Ppodpfx Aedmk Ekjgxor

Stanje: rabljeno, Leto izdelave: 2022, 510 mm serrated disc section, hydraulic working depth adjustment for disc section / working depth adjustment for leveling unit C-Mix-Ultra tines for Ceus 50 / hydraulic working depth adjustment for tine section with hydraulic drawbar, HD share 80 mm / (14/K1) Podetz Tplspfx Agxjpr

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, nosilnost: 170 kg, doseg roke: 2.700 mm, Model: KR 200 L170-2 comp Stanje: RABLJEN Leto: 2007 Krmilna omara: KRC2 ed05 Ppjdpsq A Uq Ujfx Agxer Vključeno: Manipulator + krmilna omara KRC2 ed05 + vsi kabelski seti + Teach Pendant Za ponudbo in možnosti obnove nas prosim kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov, med drugim znamk KUKA, ABB, FANUC in Motoman.

Stanje: rabljeno, Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-position angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm Ppedeq Nipyjpfx Agxjr 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 mandrels - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine dimensions (LxWxH): 400 x 100 x 120 cm Machine weight: 1500 kg