Diskovne brane

Amazone Ceus 5000-2TX

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Oprema: ABS, dvižna zadnja plošča,

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. Pgsdpfxofg E Hpo Agpow - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2023, mounted wedge ring roller KWM 3001-600, machine no. KW00059843, bearing set for / roller – attachment compact disc harrow – disc carrier section for Catros, hydraulic / working depth adjustment, LED road lighting for rigid machines / disc Pgsdpor Ty N Esfx Agpow

Stanje: rabljeno, Leto izdelave: 2019, velikost sprednje pnevmatike: 600/70R34, velikost zadnje pnevmatike: 710/70R42, Oprema: zavorni sistem na stisnjen zrak, Radar sensor, Vario terminal 10.4-inch, roof hatch / VarioGuide Variotronic implement control, VarioGuide / GSM controller, VarioDoc Pro, super comfort seat / Hydraulic pump 152 l/min / / Pedpfx Aer Ty N Negpjgw

Leto izdelave: 2007, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1785-6201, Iztiskalnik z enim vijakom Pgedpfsu Itqdjx Agpsw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 6 h, nosilnost: 3.400 kg, dvižna višina: 8.860 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.485 mm, lastna masa: 8.500 kg, skupna dolžina: 5.440 mm, vrsta pogona: Diesel, gradbena širina: 2.240 mm, Toga teleskopska viličar Tip nosilca: Teleskopski Pgjdpow Ir Inofx Agpjw Tehnično stanje: Novo Velikost pnevmatik spredaj: 460/70 R 24 Michelin XCML Velikost pnevmatik zadaj: 460/70 R 24 Michelin XCML

Stanje: rabljeno, Leto izdelave: 2024, Rear section Primera DMC 4200 l / Single-row conveyor / single-shot distributor heads for 16 rows / Long loading platform for rear section / drawbar with folding support leg / lower link hitch Cat. 3 / braked axle with parking brake / dual-line air brake system Pedpeuhnwvjfx Agpjgw

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 30.800 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 4.500 mm, prostornina tovornega prostora: 48 m³, vzmetenje: zrak, velikost pnevmatike: 315.80 r 22.5, barva: modra, Leto izdelave: 2017, Oprema: ABS, Semirimorchio Tecnokar, anno 2017, vasca ribaltabile in alluminio da 48 m³, equipaggiato con 10 pneumatici, 3 assi a disco con primo asse sollevabile e terzo asse sterzante, sistema EBS, copri-scopri elettrico scorrevole, cassettoni in acciaio inox, cerchi in lega, portellone basculante a bandiera con tenuta stagna. Veicolo in ottime condizioni. Rivenditore: Interdrive Srl - Parma. Pedpfx Agstvplcopegw

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.900 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 60 m³, vzmetenje: zrak, velikost pnevmatike: 385.65 r 22.5, barva: srebrn, Leto izdelave: 2007, Oprema: ABS, SMR tipper trailer with 60m³ Technokar aluminum body, rear unloading with sealed swing tailgate, front-mounted moto-vibro, 3 disc-braked axles with the 1st liftable and steering, hydraulic couplings, manual sliding tarpaulin cover, stainless steel toolbox, air suspension, year 2007, inspected until 30/11/2024 - DEALER INTERDRIVE SRL - PARMA Psdpfx Astpm Tmsgpsgw

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 1250x600 mm Saw band length: 8140x54x1.6 mm Pgsdsfgyigjpfx Agpsw Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams as well as solid material. The material is clamped vertically on both the infeed and outfeed sides. Starting from model K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interplay of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut" cutting system with minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning unit, is equipped with 'double-sided opening clamping jaws' which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate somewhat from the ideal shape. The pusher system is built separately and is guided via ball-bearing linear guides, precision-ground rack, and a frequency-driven, robust geared motor.