Laserski stroj za rezanje

AMADA PROMECAM LC 3015 F1 NT

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center (Multi-Function Machine) | Manufacturer: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Automatic operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" - Internal spindle bearing diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: - Turret type: Single spindle with ATC - Tool shank: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Rodpfxsyuq Dze Agtjt Travel distances: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional Information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120-station, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - CNC control: MAZATROL MATRIX - Further high-quality special equipment ... - Documentation - CE marking No guarantee for completeness or accuracy of technical data and equipment features. Subject to prior sale. Detailed technical datasheet and information on equipment available on request.

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Барабанная сушилка для опилок и щепы с производительностью до 15 т/ч. Redpfx Agevx S Hnotet Состояние – полностью рабочая.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters Rodpfx Aeu Hmacjgtot 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: rabljeno, TECHNICAL DATA Rjdpfx Agouhbv Sjtet - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO2, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with PRIMACH 20 L control unit. Redpfx Agjivg Hgjtot

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Rjdpfxscxxx Ho Agtet Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available Rjdpfow Hg Nljx Agtjt No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Inca Onset X2, 3/4-automatisiert Farbkonfiguration: 8-Kanal-Drucker mit vier Farben (CMYK) Nur 1/12 des Neupreises!!!!! Druckkopfstatus ermöglicht Drucken mit maximaler Geschwindigkeit und hervorragender Qualität – bis zu 140 Bögen/Stunde bzw. 700 m²/Stunde. Austausch von 60 Druckköpfen erforderlich (ca. 45.000 €). Die Maschine befindet sich in exzellentem Zustand und wurde seit dem ersten Tag vom Hersteller gewartet. Die jährliche Wartung erfolgte im Mai 2025. Verfügbar: Januar 2026 Mit dem Wachstum des Geschäfts bietet die Onset X2 die nötigen Kapazitäten, um das Aufgabenspektrum des Betriebs zu erweitern. Die Integration eines zweiten CMYK-Satzes erhöht die Produktivität weiter – bis zu 707 m²/h* (entspricht 138 Vollformat-Bögen pro Stunde). Optional können sechs Kanäle mit Light Cyan (Lc), Light Magenta (Lm), Weiß (W) und Orange (O) für noch mehr Flexibilität und erstklassige Druckqualität belegt werden. Je nach spezifischen Anforderungen des Druckjobs lassen sich uni-direktionale, bi-direktionale sowie Super-High-Quality-Druckmodi auswählen. Rsdeun Swbopfx Agtot * Basierend auf einer ungefähren Materialwechselzeit von 6 Sekunden. Demontage, Transport, Installation, Schulung und Gewährleistung sind (innerhalb Europas) inklusive. Weitere technische Einzelheiten entnehmen Sie bitte dem beigefügten Datenblatt.

Stanje: rabljeno,

Stanje: zelo dobro (rabljeno), CPM 2000 granulator, 90 kW motor, 410 mm die diameter. We have several units available. Rjdpfx Agewcdpnjtot