NOVI stroj za vrtanje stebrov

ALZMETALL ALZSTAR 40/SV

Stanje: novo, Bohrvermögen in St 60 40 mm Gewindeschneiden in ST 60 M 24 mm Gewindeschneiden in GG 20 M 30 Bohrhub 120 mm Kurzspindel MK 3 Ausladung 293 mm Säulendurchmesser 115 mm Maschinentisch - nutzbare Auflage 514 x 360 mm T-Nuten Anzahl - Breite - Abstand 2 x 14 x 224 mm Dodpfxogp Dyxe Aflekg Abstand Spindel-Maschinentisch min./max. 117 / 701 mm Vorschub 0,10 + 0,20 mm/U Spindeldrehzahlen 160 - 2250 UpM Gesamtleistungsbedarf 1,45 / 1,9 kW Maschinenhöhe 1840 mm Maschinengewicht ca. 285 kg ALZMETALL Säulenbohrmaschine ALZSTAR 40 SV mit Kühlmitteleinrichtung B, bestehend aus: Separatem Behälter, Pumpe mit Motorschutzschalter,kompletter Armatur. Serienmäßige Ausstattung: - Pilzdrucktaster (verrastend) für NOT-AUS - Wendeschalter für Rechts-Linkslauf - Motorschutzschalter - Drehzahlverstellung stufenlos - Drehzahlanzeige digital - Vorschubüberlastsicherung - Schutzart IP 54 - Anschlußstecker - Spindelschutz mit elektrischer Absicherung - mit LED Maschinenleuchte

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Dkodpfsfrvzvox Aflog Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: novo, Column Drilling Machine Alzmetall Alzstar 40/SV Manufacturer: Alzmetall Model: Alzstar 40/SV Condition: new Technical Specifications: Column diameter: 115 mm Machine table (usable support surface): 514 x 360 mm T-slots (number x width x spacing): 2 x 14 x 224 mm Spindle-to-table distance (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity in St 60 (mm): 40 Spindle stroke (mm): 120 Dkodpfx Aexd Tpwsflog Throat (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (rpm): 160 - 2250 Weight (kg): 285

Stanje: novo, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 515 x 360 mm Speed range: 160 - 2250 rpm Column diameter: 115 mm Feed: 0.10 + 0.20 mm/rev Distance spindle / table: 117 / 701 mm Total power requirement: 1.45 / 1.90 kW Weight: 285 kg Dimensions (LxWxH): 500 x 800 x 1840 mm Equipment/features: - automatic feed 0.10 + 0.20 mm/rev - stepless speed adjustment - short spindle MT 3 - mushroom-head emergency stop button (latching) - reversing switch for clockwise and counterclockwise rotation - digital speed display Dksdoxaakaepfx Afljg - feed overload protection - spindle guard with electrical interlock - 2 m cable with 16A plug - Operating manual in German Including special equipment: - coolant system "B" Pos. 25.

Stanje: novo, Table length: 3000 mm Table width: 1500 mm Table height: 850 mm Height adjustment: 50 mm Machine weight: approx. 1.5 t Dimensions (L x W x H): 3.0 x 1.5 x 0.9 m Welding Table with Accessories - Table size: 3000 x 1500 x 200 mm - High-quality steel S355J2+N + plasma nitrided finish - Material thickness approx. 24.5 – 27 mm - Bore diameter: 28 mm - Borehole pattern: 100 x 100 mm grid Dodpjxwzd Nefx Aflskg - Edges, corners, and boreholes chamfered at 45° - Side panel height: 200 mm - Side panels with diagonal-borehole pattern - Ribbed construction for extra reinforcement Accessories: - 6x 280610.N Screw clamp - 12x 280511 Quick-release pin - 8x 280420.N Universal stop - 2x 280110.N Stop and clamping angle - 2x 280162.N Stop and clamping angle - 1x 283999 Maintenance kit

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == Dkodpfed Hy Elsx Afljg ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: pripravljen za uporabo (rabljen), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W–0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Dkjdpfxsw D Eubj Aflsg

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross traverse: 920 mm, intermittent cross feed: 750 mm/stroke, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic table dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1,000 h, cycle hours: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. An on-site inspection is possible. Dksdpewi Tpkefx Afljg

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Dsdpfxed Sitke Aflskg Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Dodpfxsb Eldno Aflskg Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW With full-featured tapping device and programmable digital display Machine in stock and immediately available