Formatna žaga

Altendorf F45

Stanje: rabljeno, Leto izdelave: 1996, Dolžina sani: 3200 mm Širina reza pri vzdolžnem prislonu: 1300 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 145 mm Predrezilo: ne Višinska nastavitev žaginega lista: električna Giedpfx Afeyq Rz Se Ser Nastavitev nagiba žaginega lista: električna Nastavitev vzdolžnega prislona: električna Nastavitev prečnega prislona: ročna Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: - Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: skala Premer žaginega lista: 450 mm Število vrtljajev: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 4000 mm Širina stroja: 2200 mm Teža: 1200 kg

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance Gisdpfx Afowka S Ie Ssr - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2004, Dolžina sani: 2250 mm Širina reza pri vzdolžnem prislonu: 1040 mm Širina reza pri prečnem prislonu: 2900 mm Globina reza: 154 mm Predrezilo: da Nastavitev višine žaginega lista: električna / pozicijsko krmiljenje Nastavitev nagiba žaginega lista: električna / pozicijsko krmiljenje Nastavitev vzdolžnega prislona: električna / pozicijsko krmiljenje Nastavitev prečnega prislona: ročna Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: digitalni prikaz Prečno merilo z možnostjo poševnega reza: da Premer žaginega lista: 450 mm Gsdpfey Ai I Nex Af Soir Število obratov: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 2200 mm Širina stroja: 2000 mm Teža: 1200 kg

Stanje: dober (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodni tok: 11 A, največja širina rezanja: 800 mm, izvrtina žagine plošče: 30 mm, vrsta aktuacije: ročni, skupna dolžina: 2.800 mm, Oprema: zaščitni pokrov žaginega lista, Panel Saw / Table Saw / Circular Saw / Joiner’s Saw Manufacturer: Altendorf Model: F45 Gsdpfey Aht Dsx Af Ssir Year of manufacture: 1978 Sliding Table Length: 280 cm Rip Capacity / Parallel Fence approx.: 80 cm Parallelogram Safety Guard with Top Extraction Hood Outrigger Table with Crosscut Fence Mitre Fence Motor Power: 5.5 kW Condition: See images and please refer to the item description. Parts can also be collected by the buyer. All dimensions are approximate. All information provided is to the best of our knowledge but without guarantee. Subject to prior sale. Items can be collected by the buyer, or shipping is available at the buyer’s expense. The stated shipping costs are a guideline; depending on distance and unloading options, these costs may vary. Please inquire. The item is offered under differential taxation. The stated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG (German VAT Act). Warranty Terms: Due to wear and tear of used parts, the items are generally sold as defective – as spare part donors, only to commercial buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. If the offered item is used, the warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is new, the warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months. Reference to the EU online dispute resolution platform (OS).

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Giodpfx Afew I U E Ao Sor Leto izdelave: 1989 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: rabljeno, Leto izdelave: 1978, skupna dolžina: 3.400 mm, skupna širina: 1.850 mm, skupna višina: 1.600 mm, Poids : 1 250 kg - Année de fabrication : 1978 - Documentation disponible : Non - Certificat CE disponible : Non - Numéro de série : 78-11-11 - Longueur de la table à rouleaux [mm] : 3 200 - Largeur de la table [mm] : 1 070 - Alésage du disque de scie [mm] : 35 - Diamètre des buses d’aspiration des poussières [mm] : 115 - Axes commandés : hauteur de coupe, hauteur inciseur - Options : Inciseur - Vitesse de rotation de la broche : - Vitesse max. de la broche [tours/min] : 4 000 - Tension [V] : 380 - Dimensions de transport : 3 400 mm x 1 850 mm x 1 600 mm (L x l x h) - Poids de transport [kg] : 1 250 kg - Nombre de colis pour le transport : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possible à tout moment pour tout produit du secteur industriel Godoyazbbspfx Af Ssir Yorick Diebels

Stanje: zelo dobro (rabljeno), Good day! Giodpfx Afjyy S Uyo Ssr I would like to offer you the following machine: 1 used panel saw Altendorf F 45 - Hydraulic height and tilt adjustment - Digital display (speed and tilt) - 4.5 m cutting length - Automatic star-delta starter - 105 mm cutting height with 350 mm saw blade and scoring unit - 155 mm cutting height with 450 mm saw blade without scoring unit - 3000/4000/5000/6000 rpm - Automatic motor brake - Rip fence with fine adjustment - Parallelogram guard - Table extension and table width extension - Mobile chassis - Extraction connections top and bottom - Trimming shoe - Adjustable handle on the sliding table carriage - Operation tools - Operating manual/spare parts list New parts: - Narrow extraction hood 90° (181.00 + 19 %) - Wide extraction hood 45° (268.80 + 19 %) - Poly Flex V-belt 11W875 (35.50 + 19 %) - Flat belt for scoring unit (32.50 + 19 %) - Gas pressure spring 50N for scoring unit (45.30 + 19 %) - Saw blade GUHDO 350 mm (78.50 + 19 %) - New bearings installed on saw shaft (250.00 + 19 %) - New bearings installed on scoring unit (150.00 + 19 %) Special equipment: - 7.5 kW 380 Volt motor List price: €1,350 + 19 % - Scoring unit List price: €3,150 + 19 % - 4.3 m sliding table List price: €4,250 + 19 % - Pneumatic pressure beam 3.2 m List price: €3,800 + 19 % - Rip fence with fine adjustment 1.3 m List price: €580 + 19 % - Duplex double mitre fence List price: €1,350 + 19 % - LASER cutting line indicator List price: €2,300 + 19 % - Panel saw feed unit Panhans type 76 List price: €4,665 + 19 % Price: €13,800 + 19% VAT The machine has been technically inspected, cleaned, adjusted and repainted. Cables and plugs are present, ready for immediate use. Payment in cash or bank transfer prior to collection. Shipping available. The machine is sold without any warranty or guarantee. Please send me a short message. Thank you!

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Giedpfevxlq Hsx Af Sor Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, nagib 45°, hidravlično dviganje, spuščanje in nihanje, 1000 mm desno od lista, Godpfx Afjyaq Nbo Soir predrezilo, dolžina reza 3200 mm, gornje odsesavanje, 5,5 kW Cena iz skladišča Prevoz možen za doplačilo!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Table saw from 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and supports a maximum saw blade diameter of 550 mm. The machine comes with a swivelling, eye-level control panel and a rip fence for precision cuts. If you are looking for high-quality sawing performance, consider the Altendorf F45 table saw we are offering for sale. Contact us for further details. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Maximum saw blade diameter: max. 550 mm • Main motor power: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz • Current: 11.5 A Gijdoywk H Aopfx Af Sor • Phases: 3 • Control panel: swivelling, mounted at eye level • Scoring unit preparation: yes • Rip fence: included • Rip fence type: Manual adjustment on hardened, chrome-plated round bar • Rip fence display: DIGIT X (electronic digital thickness display) Additional equipment • AKE clamping system • Table extension: 840 mm • Mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Stanje: zelo dobro (rabljeno), Formatna žaga Altendorf F45 Dolžina vozička: 3200 mm Širina reza na desni strani: 1300 mm Predrezilo Maksimalna višina reza: 120 mm Električna nastavitev kota žaginega lista do 45° Električno dviganje in spuščanje delovne mize Gjdpfx Afexc Et Se Soir Glavni motor: 5,5 kW Motor predrezila: 0,75 kW Spremenljiva hitrost žage z jermenom: 3000/4000/5000 vrt/min Maksimalna velikost žaginega lista: 400 mm CE certifikat

Stanje: rabljeno, Leto izdelave: 2002, Dolžina sani: 3000 mm Širina reza pri paralelnem prislonu: 1000 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 150 mm Gjdpfxoyvz Rcj Af Sjir Predrezilo: da Nastavitev višine žaginega lista: električna Nastavitev nagiba žaginega lista: električna Nastavitev paralelnega prislona: ročna Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz paralelnega prislona: skala Prikaz prečnega merila: skala Premer žaginega lista: max. 450 mm Število obratov: 4000 obr./min Moč motorja: 5,5 kW Priključek za odsesavanje: 120 mm in 80 mm Dolžina stroja: 3200 mm Širina stroja: 2000 mm Višina stroja: 1600 mm Teža: 1000 kg

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Gisdpfx Aoiz Aufjf Ser Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Gedpfxowk Aw Ho Af Sjir Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scoring unit, 3m sliding table and Control-Plus control system Sliding table length: 3000 mm Saw blade tilts from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Operator panel at eye level with Control-Plus controller 4-axis CNC-controlled Cutting of chain dimensions and grooves on rip fence and crosscut fence Cut width correction on rip fence and crosscut fence when saw blade is tilted 600 cutting programs Calculator function with transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilt angle and height adjustment are electrically adjustable Godpfxsxw Ii Ss Af Sjir Crosscut fence up to approx. 3210 mm, electrically adjustable, with automatic coupling of the second stop flap for large cutting sizes Folding rip fence Extraction ports: 120 + 80 mm Sliding carriage lockable Additional angle stop ruler 2 used saw blades and a scoring blade 2 riving knives 2-axis prescoring unit, adjustable electrically during operation 2 safety hoods 3 emergency stop switches Clamp board at control panel CE marking Machine shows signs of use. No cuts on the sliding table. Original paintwork (special color), partially repainted. Machine has 18,985 operating hours. It comes from a furniture factory and was evidently serviced and well maintained regularly. Condition as shown in the original photos. A video of the machine in operation can be provided upon request. Dimensions approx. 3150 x 3750 x 1900 mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this supplier."