Formatna žaga

Altendorf F45

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, nagib 45°, hidravlično dviganje, spuščanje in nihanje, 1000 mm desno od lista, predrezilo, dolžina reza 3200 mm, gornje odsesavanje, Nwsdpfoyaq Nbox Ah Iod 5,5 kW Cena iz skladišča Prevoz možen za doplačilo!

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage Nedpfx Ahsw I Uxcs Ijwd The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, 2014 table saw. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and allows for a maximum saw blade diameter of 550 mm. The machine comes with a swiveling control panel positioned at eye level and a parallel fence for precision cuts. If you are looking for top-quality cutting performance, consider the Altendorf F45 table saw we have for sale. Contact us for further information. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Maximum saw blade diameter: 550 mm • Main motor output: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz • Amperage: 11.5 A • Phases: 3 • Control panel: swiveling, mounted at eye level • Scoring unit preparation: yes • Parallel fence: included Additional features: Nwodpfxoywk H Aj Ah Ijd • AKE clamping system • Table extension: 840 mm • Angle-mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Glavni motor 5,5 kW Paralelni prislon Dolžina reza 3.500 mm Dolžina mize 2.200 mm Širina reza 1.000 mm Predrezovalna žaga 0,75 kW Nagibni razpon +/- : -0,5 - 47° Največji premer žaginega lista 500 mm Hitrost vrtenja 2.000 do 6.000 obr/min Dolžina reza 5.000 mm Širina vodilne reže klina 13 mm Napetost 400 V Tok 35 A Frekvenca 50 Hz Glavni motor: ATB tip YAF 112 M/21-11, moč 5,5 kW Digitalni dolžinski prislon Predrezovalna žaga Premer predrezovalnega žaginega lista 120 mm Premer držala orodja 22 mm Motor predrezovalne žage: ATB tip MAF 80/2 A-11, moč 0,75 kW 1/min Nwodpfx Aeyxpy Reh Ied Vključno z vakuumsko mizo in 2 laserjema Razklopni klin Altendorf 3 kosi Zaščita Altendorf Leitz rezkalna plošča

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Uporabna dolžina reza 5000 mm Premer rezil 550 mm Elektronski nagib glav Notranji/zunanji naklon od 22°30′ do 135 ° Tipalo Nwedeyg Epvopfx Ah Ied

Stanje: rabljeno, Leto izdelave: 2002, Dolžina sani: 3000 mm Širina reza pri paralelnem prislonu: 1000 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 150 mm Predrezilo: da Nastavitev višine žaginega lista: električna Nastavitev nagiba žaginega lista: električna Nastavitev paralelnega prislona: ročna Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz paralelnega prislona: skala Prikaz prečnega merila: skala Premer žaginega lista: max. 450 mm Število obratov: 4000 obr./min Moč motorja: 5,5 kW Priključek za odsesavanje: 120 mm in 80 mm Dolžina stroja: 3200 mm Širina stroja: 2000 mm Višina stroja: 1600 mm Teža: 1000 kg Nedpfxsyvz Rcj Ah Iswd

Stanje: dober (rabljeno), Leto izdelave: 1986, rabljeno, v dobrem stanju Proizvajalec Altendorf Model F45 Leto izdelave 1986 Št. stroja 86-4-143 GS testirano Motor 5,5 kW Dolžina vozička cca 2500 mm Širina reza cca 800 mm Naklon do 45° Nodpfxeyvv I Ns Ah Ijwd Premer žaginega lista: 450 mm Paralelogramska zaščita Kotna ograja Priključek za odsesavanje D 80 in 120 mm Zahtevan prostor cca 2500 mm x 1600 mm x 1500 mm Teža cca 1000 kg Lokacija: iz skladišča 54634 Bitburg, brezplačno naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1630, skupna masa: 7.800 kg, trajanje garancije: 6 meseci, moč: 85 kW (115,57 KM), Prodaja se kompletna proizvodna linija na osnovi briketirke Di Più BRIK MB100 (complete production line). Generalno obnovljen stroj DI PIU BRIK MB100 (tovarniško obnovljen leta 2025), pripravljen za takojšnje delovanje. Stroj je namenjen visokozmogljivemu briketiranju. Primeren je za zahtevno industrijsko uporabo. Stroj ima za seboj približno 2.000 delovnih ur. Nwedewrp Emspfx Ah Ijd Stroj je na novo obnovljen v tovarni Di Piu, zamenjani vsi vitalni deli, vsi kabli, električna napeljava, ter potrebna električna oprema. S čimer je stroj dan v stanje novega in ima 6 mesečno tovarniško garancijo proizvajalca Di Piu. Stroj lahko proizvaja brikete z luknjo ali brez, debeline 90mm do 110mm iz mehkega in trde lesa, okrogle ali kvadratne. Ogled stroja je možen v tovarni v Italiji: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italija Mehanska briketirka Di Piu BRIK MB100 je avtomatski stroj za stiskanje lesa, žagovine in drugih odpadnih materialov v lesne brikete. Idealna vlažnost vhodnega materiala je med 8 % in 12 %, velikost delcev pa med 1 mm in 12 mm. Tehnični podatki: -Kapaciteta proizvodnje: 1.300 – 2.300 kg/h (pri gostoti žagovine 160–200 kg/m³) -Premer briketa: 90 – 110 mm -Moč glavnega motorja: 75 kW -Skupna instalirana moč: 98 kW -Tlak stiskanja bata: 2.000 – 2.500 kg/cm² -Vertikalni polž z reduktorjem: 5,5 kW -Oljna črpalka: 1,5 kW -Oljna črpalka za zapiranje iztiskalne glave: 1,5 kW -Dozator s polžem in nastavljivo hitrostjo: 1,5 kW -Oljni sistem za mazanje bronastih ležajev: 100 litrov -Senzor za nadzor izhoda briketov (samodejni izklop ob izpraznitvi materiala) -Zaščitne obloge gibljivih delov -Senzor tlaka olja -Krmilna omarica -Zalogovnik za vhodni material (akumulator) -Senzor nivoja za nadzor napajalnega sistema -Teža stroja: cca 7.800 kg Stroj je opremljen z vsemi pripadajočimi dodatki za popolno delovanje in integracijo v linijo za briketiranje: DODATNA OPREMA – MB100: - Dozirni silo: Izdelan iz masivne jeklene konstrukcije. Premer: 1500 mm, višina: 1000 mm. Vgrajen ima rotacijski rezalnik z reduktorjem 2,2 kW, nameščen na robustno jekleno ogrodje. Dovajanje materiala nadzira senzor nivoja. - Linija za hlajenje briketov po iztiskanju, skupne dolžine 20 metrov - Avtomatska žaga za razrez briketov - Žaga samodejno reže brikete na dolžine, ki jih predhodno nastavi operater. - Naprava za proizvodnjo briketov z luknjo - Sistem za hlajenje glave stroja z ledeno vodo - Sistem proizvaja 50 litrov/minuto ledene vode za učinkovito hlajenje glave briketirke. - Zračno hlajen hladilnik vode z hermetičnimi spiralnimi kompresorji, mikroprocesorskim krmiljenjem in velikim rezervoarjem za shranjevanje energije, v katerem je potopljen izmenjevalnik toplote voda–hladilno sredstvo. - Izmenjevalnik toplote je visokoučinkovit tipa “fin-pack”, izdelan iz bakrenih cevi in aluminijastih lamel. - Rezervoar za vodo prostornine 800 litrov - Črpalka za dovod vode (50 l/min – 20 m.c.a. – 0,55 kW) s trikrožnimi ventiloma DN25 za uravnavanje temperature hladilne vode v glavi briketirke. - Digitalni elektronski regulator temperature povezan s senzorjem NTC (merilni element d.6 × 52 mm, IP68, AISI 316). DODATNO: NOVAPAC pakirka Možnost dodatnega nakupa pakirke NOVAPAC, ki je popolnoma kompatibilna s strojem Di Più BRIK MB100 in drugimi stroji, idealna rešitev za avtomatsko pakiranje neposredno po stiskanju. Letnik: 2013 Cena za Novapac: 19.000 € Oprema vidna na zadnjih 6 slikah

Stanje: rabljeno, Leto izdelave: 1978, skupna dolžina: 3.400 mm, skupna širina: 1.850 mm, skupna višina: 1.600 mm, - Année de fabrication : 1978 - Documentation disponible : Non - Certificat CE disponible : Non - Numéro de série : 78-11-11 - Longueur de la table à rouleaux [mm] : 3200 - Largeur de la table [mm] : 1070 - Diamètre de l'alésage de la lame de scie [mm] : 35 - Diamètre du raccord d'aspiration [mm] : 115 - Axes commandés : Hauteur de coupe, hauteur du préinciseur - Options : Préinciseur - Vitesse de rotation de la broche : - └ Vitesse de rotation max. de la broche [tr/min] : 4000 - Tension [V] : 380 - Dimensions de transport : 3400mm x 1850mm x 1600mm (L x l x h) - Nombre de colis pour le transport [pcs] : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Yorick Diebels Nedpfx Ajyazbbeh Iewd

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder Nwsdpfxjiz Aufj Ah Ied M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Oil burner Weishaupt WM-L10 Year of manufacture: 2008 We speak Russian! Viewing by prior telephone arrangement only! Nedpfx Asi Ap Atsh Iswd Preferred sale to dealers, tradespeople, or for export. All information provided without guarantee. Subject to errors and prior sale. The seller accepts no liability for typing errors or transmission mistakes. We are happy to purchase your used boiler or burner! Of course, we also handle all formalities. Loading is possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vrsta vhodnega toka: trifazni, največja višina reza: 204 mm, vrsta nastavitve višine: električni, vrsta aktuacije: električni, Oprema: dokumentacija / priročnik, zaščitni pokrov žaginega lista, For sale is a high-quality Altendorf F45 ProDrive from the year 2020 – one of the best panel saws available on the market. This machine is ideal for joineries, carpenters, timber construction, or ambitious professionals. Technical Data & Features +Model: F45 ProDrive +Year of manufacture: 2020 +Machine height: 910 mm +Eye-level operating panel (ergonomic control concept) +Increased cutting height including tilting function +Max. saw blade diameter: 550 mm Nwjdpfx Ahsywi N Ao Ied +Cutting height: 204 mm +Motor power: 7.5 kW (10 HP), three-phase current +Double roller carriage with 3000 mm carriage length +Table extension: 840 mm +Rip fence: 1000 mm +Angle/miter fence +Edging shoe Only 43 operating hours! This is on average less than a working day per year – the machine is practically as new and has seen very little use. -Inspection possible by arrangement -Assistance with loading available -Private or commercial sale -Price: €16,500 net (negotiable) – fair offers welcome If interested or if you have any questions, feel free to contact me! Tel.: 03904/40286

Stanje: rabljeno, Leto izdelave: 2004, Dolžina sani: 2250 mm Širina reza pri vzdolžnem prislonu: 1040 mm Širina reza pri prečnem prislonu: 2900 mm Globina reza: 154 mm Predrezilo: da Nastavitev višine žaginega lista: električna / pozicijsko krmiljenje Nastavitev nagiba žaginega lista: električna / pozicijsko krmiljenje Nastavitev vzdolžnega prislona: električna / pozicijsko krmiljenje Nastavitev prečnega prislona: ročna Nwedpfeyt E Rgjx Ah Ied Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: digitalni prikaz Prečno merilo z možnostjo poševnega reza: da Premer žaginega lista: 450 mm Število obratov: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 2200 mm Širina stroja: 2000 mm Teža: 1200 kg

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Nwjdpfxju R S Hce Ah Iod Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood optional - - New demonstration machine -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Formatna krožna žaga Proizvajalec: Altendorf Tip: F45 Leto izdelave: 2012 Delovne ure: pribl. 820 h Dolžina vozička: 320 cm Širina reza: pribl. 1.013 mm Višina reza: 175 mm Maks. premer žaginega lista: 500 mm Nodpfx Aeyvqzkeh Iowd Predrezilo: Da - Rapido Nastavitev širine reza: električna Število obratov: 2.000 - 6.000 obr./min Nastavitev obratov: Vario - brezstopenjsko Motorna zavora: Da