Vertikalni obdelovalni center

ALMAC CU1005 CNC

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size Rbsdpfevdal Asx Ad Tot 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Article No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: Rbjdpfx Aocuntzod Tot - Horizontal vice - Length stop (600 mm) - Saw blade tension monitoring, electromechanical - Chip removal brush - Coolant device - Operating manual

Stanje: dober (rabljeno), Manufacturer: OMERA Rodpskvnumsfx Ad Tobt Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2005, CITIZEN K12 CNC Lathe Automatic TECHNICAL SPECIFICATIONS Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Rodpfxsvrz H Rj Ad Tjbt Spindle speed: 15,000 rpm Max. machining diameter of sub spindle: 12 mm Max. machining length of sub spindle: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool turret, number of tools: 8 Speed of driven tools: 6,000 rpm X1-axis: 122 mm Z1-axis: 200 mm Z2-axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (list not exhaustive): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Exact scope of delivery as per photo documentation We do not accept any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: kot nova (razstavni stroj), dolžina mize: 500 mm, širina mize: 300 mm, Surface grinding machine Ziersch Z35 - Demo unit, unused - Grinding area: 500mm x 350mm Dressing device Permanent magnet Rodpfsvvwf Dox Ad Tjbt Belt filter system with magnetic separator

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, 5-osni obdelovalni center - univerzalni DECKEL MAHO DMU 70 EVO Leto izdelave: 2002 Krmiljenje: MillPlus iT Heidenhain Delovne ure stroja: 33.289,6 h Delovne ure vretena: 10.533,5 h Tehnični podatki: x-hod: 750 mm y-hod: 600 mm z-hod: 520 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 20 - 18.000 min⁻¹ Pogonska moč glavnega vretena: 35 / 25 kW Maks. navor: 130 / 87 Nm NC rotacijsko-nagibna miza: Vpenjalna površina mize: 700 x 500 mm Območje nagiba osi B: 180 ° Obračanje v osi C: 360 ° maks. obremenitev mize: 350 kg Centrična odprtina: 30 H6 mm T-utor: 7x 14H7 x 63 mm Območje vrtljajev mize: 21,5 min⁻¹ Orodni magazin: Število orodnih mest: 32 pozicij Rjdpoxf Hlhofx Ad Tsbt maks. dolžina orodja: 315 mm maks. premer orodja: 105 mm maks. premer orodja pri prosti sosednji posodi: 130 mm maks. teža orodja: 6 kg

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Turning diameter: 38 mm Item: CNC Turning Machine Make: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z1 travel: 320 mm; synchronous running guide bush unit; guide bush type: JBS or SL38; collet type: 173E / F48 Redpfotv Sdfox Ad Tjbt Sub spindle: Max. pick-off diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z2 travel: 320 mm; collet type: 171E / F42 Turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; servo axes: X2, Y2, Z2; stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or *

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, obratovalne ure: 11.200 h, številka stroja/vozila: D300-373, potovalna razdalja osi X: 550 mm, pomik osi Y: 340 mm, pomik po osi Z: 350 mm, širina mize: 470 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, HSC300/3 (limited usage) Complete system overhauled Technical specifications: Travel range XxYxZ: 550x340x350 mm Clamping table – table/spindle nose: 495 mm Overall dimensions (WxDxH): 2000x2350x2450 mm Rapid traverse: 30 m/min Equipment: Paint finish: light grey, partial paintwork in visible areas CNC control: Heidenhain iTNC530i electronic handwheel direct measuring systems for all axes Milling spindle: HVC140, milling power 10KW/13KW, HSK 40-E Spindle speed up to 42,000 rpm Tools from 0.02–16 mm diameter Tool magazine: 40-slot HSC40-E calibration arbor calibration Blum laser for tool measurement Rodpfx Ajr Hb Hped Tebt minimal quantity lubrication external cooling unit: H.I.B preparation for dust extraction dust extraction unit Vario1 by Keller Transport commissioning on site training in-house/on site 6-month warranty

Stanje: novo, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Motor power: 2.2 kW Rsdpfxoir Igwe Ad Tebt Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Leto izdelave: 2002, Stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Rbsdpfxslz Rvls Ad Tjt Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.