CNC vertikalna stružnica 2400 mm

ALEX TECH VIPER VTL 24M

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.797 mm, skupna masa: 1.570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating probe head and the VAST XXT TL3 sensor, enabling scanning speeds of up to 150 points/second. Ideally suited for precision measurements with a maximum workpiece weight of 730 kg. Consider the option to purchase this ZEISS Contura 7/10/6 RDS CMM. Contact us for further information about this unit. Additional information: • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system • Sensor system: • Swivel head: Tilt ±180°, rotation in 2.5° increments • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus assembly weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (according to ISO 10360): • Length measurement error (E₀): 1.7 + L/350 µm (at 18-22°C) • Probing error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm • Control: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB Performance: • Drive system: Motorized CNC • Traverse speed (axes): 0-70 mm/s • Max. vector speed: 465 mm/s Fpedpfjx D Ngfox Abvod • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s Utilities: • Power supply: 100-240V AC (±10%), 50-60 Hz • Max. power consumption: 800 VA • Typical power consumption: 200 W • Compressed air: 6-8 bar, pre-filtered, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min Ambient conditions: • Operating temperature: 18°C-22°C • Relative humidity: 30-60% (non-condensing) Compliance & Certifications: • Conforms to EC Machinery Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited: ISO/IEC 17025:2005 Dimensions Machine depth: 1975 mm

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Fpsdpfx Aeqiz N Rebved Lifting height: 9 meters

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Fpedpfoygiwqox Abvsd Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, največja hitrost vretena: 2.066 obr/min, skupna masa: 4.000 kg, 3-axis Heidenhain digital readout feed drive controller automatic lubrication external electrical cabinet table size: 2000 x 460 mm travels: 1500 x 700 x 550 mm weight: 4000 kg Fsdpswqcv Nofx Abvspd

Stanje: rabljeno, Leto izdelave: 2013, Technical Specifications: X-axis travel: 760 mm y-axis travel: 460 mm z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 positions Table size: 900 x 410 mm Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Fpedpfx Abovhbpdsvjd Total power requirement: 20 kVA Machine weight approx.: 6.0 t Dimensions of coolant system: 1.7 x 0.7 x 1.35 m Approx. machine dimensions (LxWxH): 1.9 x 2.3 x 2.45 m TNC 620 (Contour control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into network Safety doors with shatterproof plastic windows Chip conveyor Hydraulic unit Coolant filtration unit Rittal chiller on control cabinet Work area interior lighting Handheld control unit

Leto izdelave: 2015, stanje: zelo dobro (rabljeno),

Leto izdelave: 2003, stanje: dober (rabljeno), Travels 560 x 410 x 510 mm, table 900 x 410 mm, 30-tool magazine, 12,000 rpm spindle, chip conveyor Fpjdpfxeiwkhks Abvod

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Fodoqvd Iqepfx Abvjpd Maks. višina obdelovanca: 150 mm Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm Os C: 360° Krmiljenje FANUC Vertikalni stružni stroj | EMAG - VL2 Opremljen s transporterjem za obdelovance. Stroj je v zelo dobrem stanju. Prosimo, upoštevajte, da so tehnični podatki dodani na osnovi primerljivih strojev.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, X-os 1.500 mm Y-os 660 mm Z-os 600 mm Dimenzija mize 1.680 x 660 mm Vretenova hitrost 12.000 obr/min Vpenjalo orodja SK40 Menjalnik orodij 24 pozicij Krmiljenje ULTIMAX 4 Vključuje 4. os Kitagawa MR 200 (rotacijska os + konjiček) Vključuje transporter za ostružke Vključuje notranje hlajenje skozi vreteno (IKZ) Fodpfxsxm Tufe Abvjpd

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Fpsdpfx Abshrnbksved Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.