Vijačni kompresor s hladilnim sušilnikom

AGRE ALUP SCK 10-10 270 Plus

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Drying system / dryer suitable for various materials such as powders, granulates, etc. Kjdpfsqu R Naox Abxjdn - Control system for temperature regulation This machine is connected and ready for testing in our machinery hall.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used. Technical Data: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5-1000 mm Working height: 800 mm Kjdpfx Abjv Tk Exexedn Strokes per minute: 30-64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Description: The machine is in good technical condition; testing is possible by prior agreement. Equipped with Siemens Shopturn system, including bar feeder, machine is fully equipped. BASIC PARAMETERS Working area - Max. turning diameter: approx. 410–500 mm - Max. length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: approx. 700 mm - Actual use: ideal for shafts, flanges, housings up to approx. 800 mm Axis Travels - X-axis: approx. 480 mm - Y-axis: approx. 100 mm - Z-axis: approx. 800–845 mm - B-axis: approx. 110° (5-axis machining) - C-axis: 360° (indexing + interpolation) This makes it a fully-fledged turn-mill center (not a conventional lathe). Spindles - Main spindle speed: approx. 5000 rpm - Power: approx. 25–34 kW - Bar capacity: approx. 76–87 mm - Sub spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a conventional lathe) - Speed: up to 12,000–20,000 rpm - Power: approx. 19–22 kW - Taper: HSK-A63 or Capto C6 - Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool system - Magazine: 24–48 tools - Live tools: yes (fully integrated) Control system - Siemens 840D sl + CELOS (most common) Ksdpfxey Rgafe Abxodn Weight and Dimensions - Weight: approx. 10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Stanje: dober (rabljeno), The machine was used for washing fruit and olives and is in good condition. Ksdpevtf T Dofx Abxsdn

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 15.996 h, vhodna napetost: 400 V, skupna masa: 6.750 kg, 1000 kN Kodpetwliwjfx Abxsdn Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Kjdpsqabm Eofx Abxjdn Price negotiable!

Stanje: rabljeno, WIG сварочный аппарат MESSER GRIESHEIM Тип Combitig GW 23 AC/DC Kdedodzqa Ispfx Abxon Устройство работает только на сварке постоянным током и контактном поджиге. Заводской номер: 445276 Год выпуска: примерно 1990 Мощность: 230 A = 35% ПВ 180 A = 60% ПВ 140 A = 100% ПВ Диапазон регулировки: плавный Вид тока: постоянный (DC) Сеть: 400 В, 50 Гц, вилка на 32 А - 2-тактный / 4-тактный режимы сварки - Сварка постоянным током с контактным поджигом работает - Сварка переменным током и высокочастотный поджиг не работают - 7-метровый шланговый пакет с WIG-ручной горелкой - Разъем для подключения выносного потенциометра (педаль) – без педали - Воздушное охлаждение - Газовый редуктор в комплекте Габариты (Д x Ш x В): 850 x 480 x 600 мм Вес: около 90 кг В результате тестовой сварки по нержавеющей стали на постоянном токе получены хорошие результаты; высокочастотный поджиг не работает, но дугу можно зажечь коротким контактом. При сварке алюминия на переменном токе дуга не возникает.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, skupna masa: 3.800 kg, Ta 3-osna BIESSE Selco WN 2 je bila izdelana leta 2020. Ima robustno maso stroja 3900 kg in deluje na napetosti 400 VAC s porabo 12 kW. Stroj je zasnovan za učinkovito razrezovanje plošč in ima oznako CE za skladnost. Če iščete visokokakovostno formatno žago, priporočamo, da razmislite o stroju BIESSE Selco WN 2, ki ga prodajamo. Za več informacij nas kontaktirajte. • Teža krmilne omare: 190 kg • Napetost napajanja: 400 VAC • Polni tok: 24 A Kedpfx Abjyt Rkljxedn • Število faz napajanja: 3 • Poraba energije: 12 kW • Frekvenca: 50 Hz • Kratkostna vzdržljivost: 10 kA RMS • Dovod stisnjenega zraka: 6,5-7 bar • Zahtevana hitrost odsesavanja: 30 m/s • Oznaka CE: Da

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Kjdpfxjl Tn Afe Abxjdn Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: novo, Leto izdelave: 2026, Consisting of bale breaker for large bales type MHB and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (approx. 15 weeks production time) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the scraper floor. The bales are placed on the scraper floor and the feed of the milling unit is activated. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the combination of the bale breaker and straw shredder is recommended here. Technical data of the bale breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill and the kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Scraper floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the even larger straw shredder (18.5 kW): +€2,750 net Technical data, MHZ with special hopper: 15 kW 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts, optional perforations: (10, 12, 15), 22, 30, 45 mm With star-delta switch, overload protection, and 8 m connection cable ready to plug in Discharge nozzle: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras at a surcharge: Feed screw: +€970 net Cyclone (suspension to be installed by customer) Kdodpfx Absb Nulhexon *Should be installed no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (makes the material pressureless): +€5,750 net Control system: from €1,620 net Special extension for the bale breaker 3 m (other sizes on request) +€9,750 net Briquetting press MPP 180 S; lightly used demonstration unit 70 mm briquettes – up to a maximum of 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for breaking up round and square bales of hay and straw. The attached shredder attached to the bale breaker shreds straw from all cereal varieties, hay, maize, and miscanthus. The muetek machines of the MHZ/MHB series stand out due to their robust design and heavy-duty construction. muetek MHB series bale breakers are equipped with a chain conveyor on which the straw bale is placed using a front loader. The platform is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with multiple teeth that tear apart the straw bale. The straw separated from the bale is expelled. --- Basically, the machines are suitable for dry feedstocks: – Straw – Hay --- Processing hemp is only possible with a special bale breaker Surcharge approx. €9,720 net * depending on version. Shredding hemp is not possible with the straw mill. Requirements for the feed material: Moisture content max. 12%