Označevanje stroj

Accraply 5203LE

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Feed System Media width: min. 100 mm, max. 216 mm Sheet size: min. 76.2 mm, max. 254 mm (*up to 1200 mm in sequential mode) Media diameter: max. 254 mm Core size: max. 76 mm Media weight: max. 10 kg Laminator Media width: min. 80 mm, max. 195 mm Media size: max. length 200 m or 210 mm outer diameter Inner core diameter: max. 76 mm Media diameter: max. outer: 200 mm, max. inner: 25.4 mm Hnodpfet D E Aiex Af Tog Media weight: max. 8 kg Cutter System: Kiss-cut with cutting plotter Motor: Digital servo motor Cutting force: 20 - 300 gf, adjustable in 31 steps Max. cutting area: Without reg. marks: 203 mm x 300 mm; With reg. marks: 186 mm x 1200 mm Max. cutting speed: 600 mm/sec General Data Max. media diameter for separation unit: 220 mm Core: 25.4 mm Number of slitters: 3 Interface: USB 2.0 (High Speed), Network (Ethernet 10BASE-T / 10BASE-TX) Display: LCD, 128 x 64 pt Power supply: AC 100–120V, AC 200–240V, 50/60Hz (auto-switching) Max. power consumption: 170 VA Operating conditions: 10–35°C / 35–75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy: 16–35°C / 35–70% relative humidity (non-condensing) Dimensions (W x H x D): approx. 1904 mm x 994 mm x 1297 mm Weight: approx. 151 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Labelling system for round and square canisters Stainless steel frame 170 mm wide slat chain conveyor (optional wider available) Hedpfx Asu Ia E Ijf Tong Standard label width 140 mm or 190 mm, optionally up to 260 mm Label length 300 mm, optionally longer Dispensing speed up to 30 m/min, optionally 50 m/min Product diameter (subject to technical approval) from 20 mm to 170 mm, other sizes available on request Touch screen display with memory function Label applicator with three-dimensional adjustment Product separation with double-sided belts Product orientation for square bottles Top belt guidance for square and oval products Additional labelling options available such as top labelling, seal labelling, bottom labelling, etc.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Opis: Kompletna automatska linija za vaganje i pakiranje slobodno tekućih zrnastih ili kristalnih proizvoda, kao što su gnojiva. Linija se sastoji od: Hnsdpfx Aswqfadjf Teg Automatska mrežna vaga NET/G • Temeljena na CBC sustavu za vaganje • Gravitacijski uljevni sustav • Dijelovi u kontaktu s proizvodom od nehrđajućeg čelika (AISI 316) • Elektronička kontrola s mikroprocesorom i LED zaslonom • Pneumatska regulacija protoka • Priključak za izvlačenje prašine • Namijenjena za vreće od 25, 40 i 50 kg Automatska mašina za izradu vreća FFS-E 900 • Formira i zatvara polietilenske (PE) vreće iz cijevnog koluta • Do 900 vreća/sat (ovisno o proizvodu) • Dvije stanice za brtvljenje (dno i vrh) • Kontrola duljine vreće pomoću enkodera i fotoćelije • Vibracijski uređaj za sabijanje proizvoda • Siemens PLC upravljanje, operaterski terminal TP177B • Konstrukcija od nehrđajućeg čelika i antikorozivnih materijala • Kompletirano transportnim trakama i zaštitnom ogradom Pogodno za: Zrnasta gnojiva, ureu, kristalne kemikalije, smole, sol i druge slobodno tekuće materijale. Ključne riječi: concetti, net/g, ffs-e 900, automatska vrećarica, linija za pakiranje, form-fill-seal, ffs pakirnica, polietilensko pakiranje, rabljena pakirna oprema, mrežna vaga, industrijska linija za pakiranje, slobodno tekući materijali, pakiranje gnojiva, zrnasti materijali, kristalni proizvodi, punjenje vreća, stroj za otvorene vreće, strojevi s kolutnim napajanjem, linija za paletizaciju, PE stroj, AISI 316, inox vrećarica, Siemens PLC, automatizirana linija za punjenje, stroj za izradu vreća, linija za gnojivo, punjenje uree, vrećanje sa zavarivanjem, industrijska automatizacija, CE certifikat, rabljena pakirna linija, teška vrećarica, pakiranje u rinfuzi, precizno vaganje, dozirni sustav, sustav za zatvaranje vreća, automatski sustav punjenja, eurodrive motori, modularno rješenje za pakiranje, sustav za punjenje i zavarivanje vreća.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) Hnedog Ezarjpfx Af Tjg - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 1979, Stanje: rabljeno, Outreach: 22/29 mm Hnedpszif Sofx Af Tjg Drive motor: at 380 V approx. 0.55 kW Space requirement: 450 x 500 x 560 mm Weight: approx. 6.5 kg Pressing force: 30 kN

Stanje: rabljeno, številka stroja/vozila: 11629, Rotor diameter: 450 mm Rotor width: 800 mm Hnjdpjghgqaofx Af Tjg 5 x 5 knife rotor (staggered arrangement) 2 rows of stator knives Infeed opening approx. 600 x 800 mm Drive motor: 55 kW Equipped with soundproof enclosure, mobile

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Hodpfx Afeu Icc As Tsng Tooling optional *

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Hodpfxjhzq Dqs Af Tong Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Hodpst Eu Azofx Af Teng

Leto izdelave: 2023, Stanje: novo, Chillers with various refrigerants and low GWP values available ex works on request. Hnedpfx Ajhtfggef Tsg We are happy to advise you on the different refrigerants, applications, and installation conditions.