Konzolni žerjav

Abus Säulendrehkran VS

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks Lrodpfx Afsh Uqibjmjn ATTENTION! We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Lodpfx Ajpiarnofmsrn Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: rabljeno, 7 pieces of folding tools for a swivel bending machine, length 3000 mm. Ljdpfx Afsb D Ry Rsmsrn

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), - RABLJEN - FIBER LASERSKI REZALNIK ZA CEVI S SISTEMOM ZA NALAGANJE/ODLAGANJE MIN. KROGLOVI PREREZ: ø 25 mm MAKS. KROGLOVI PREREZ: ø 355 mm MAKS. KVADRATNI PREREZ: 260 x 260 mm MAKS. PRAVOKOTNI PREREZ: 300 x 200 mm MAKS. DOVOLJENA OBREMENITEV: 100 kg/m Lodpsx E Eihefx Afmern VIR: IPG YLS-4000; 4000 W KRMILNA ENOTA: SIEMENS 840D TEŽA: 12.500 kg OPOMBA: AVTOMATSKO NALAGANJE 3-12,5 m; AVTOMATSKO ODLAGANJE 12,5 m; 3D REZALNA GLAVA; KAPACITIVNI SENZOR; AVTOMATSKA NASTAVITEV

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 55.771 h, laserske ure: 35.157 h, laserska moč: 3.200 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 140 m/min, natančnost pozicioniranja: 0,02 mm, leto zadnje generalne obnove: 2024, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 150 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, Laser je v obratovanju, možen ogled in preizkus. Redno servisiran, v dobrem tehničnem stanju. Vsa ogledala so bila popolnoma zamenjana leta 2024. Lsdpjv Hxbbsfx Afmern

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Lrjdpfxefxpbme Afmjn

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- Lrodpfxet Hw Shj Afmjn lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - Very good condition - Made in Germany - Year of manufacture: 1996 - Segmented shoe – ideal solution for lacquer / veneer work TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1–150 mm - Combi unit with membrane shoe, task-controlled - Main unit motor power: 11 kW - Belt air jet cleaning - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Unit with felt drum - Drum motor power: 0.75 kW - Drum oscillation - Cleaning brush unit - Brush motor power: 0.75 kW - Feed speed steplessly adjustable - Feed speed range: 4–18 m/min - Feed motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction port diameters: 4 x 120 mm, 1 x 150 mm Ljdpfx Afegi Drysmjrn Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2,500 kg 1. The Alpha Combi unit is a sanding module with a 150 mm diameter contact roller (hardness 90 Shore) integrated with a sectional pneumatic shoe with section width 27 mm. 2. EMS 27 optical system – detects minimal surface irregularities and adjusts the pressure of individual shoe sections at specific locations on the workpiece. 3. Control of adjacent shoe sections is possible within a range of -2 to +4.

Stanje: rabljeno, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram face: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram face with 4 x M16 threads and 20 mm guide slot, centrally located centering bore Ø 15 mm Ledsd Swtaopfx Afmjrn - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Stanje: rabljeno, Technical Data Faceplate diameter 1580 mm Max. turning diameter 1700 mm Max. turning height with cross-rail support 1250 mm Max. turning height with side support 1160 mm Max. faceplate load 12,000 kg Max. distance faceplate to underside of cross-rail 1210 mm Max. distance faceplate to underside of side tool post 980 mm Max. distance faceplate to underside of turret head 1420 mm 18 spindle speeds 2.8 - 140 rpm 18 feed rates 0.063 - 3.15 mm/rev Total power requirement 55 kW Space requirement approx. 5300 x 3500 x 4100 mm Control Lredpfx Aowyn Ntjfmen conventional