Orodna omara

Abkantwerkzeugschrank UKB 40.643

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams Pjdpfxeq Sc Aus Andogn - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: xxxx, High-Performance Bench Thread Tapping Machines on T-Slot Table Technical Data: Psdjf Tcy Dopfx Andjgn - Thread tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (pivot radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Stanje: novo, Welding positioners (turntables) increase work flexibility, productivity, and quality. Turntables also assist the welder during operations, ensuring a safe working environment and improved ergonomics. The main advantage of PEMA positioners is that workpieces can always be set to the optimal welding position. This can increase welding productivity by up to 70%. 50 years of productive, high-quality welding – for half a century, we have been designing and manufacturing welding positioners for demanding and heavy workpieces. Pgsdpfx Aneg Urz Hedon Pemamek welding positioners combine modern design with reliable, efficient technology and can be seamlessly integrated into any other PEMA solution. Each of our welding positioners is designed in-house and manufactured using high-quality components. We are the official PEMA representative for Southern Germany. We still have several APS older generation positioners in stock. The new APSI generation is already available from stock.

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm - Electrically tiltable Pedpfxjgg Rb Tj Andjgn - Foot pedal - Documentation - 230V

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Maximum acceleration: 1.5 m/s² Pgedei Ar Ruspfx Andjn Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame - Machine frame The unit is immediately ready to weld. Pgedsv Dvlljpfx Andon

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe Pgodpfxey E Tvvs Andjn GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools - Only approx. 8,093 spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial)

Leto izdelave: 2020, obratovalne ure: 6.056 h, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: SIEMENS Model: 840D Splošni podatki Širina: 3.150 mm Globina: 5.564 mm Višina: 2.135 mm Teža stroja: 10.000 kg Glavni pogon Območje vrtljajev vretena: 3.600 vrt/min Premikanje Hitrost hitrega pomikanja X-osi: 30 m/min Hitrost hitrega pomikanja Y-osi: 22,5 m/min Hitrost hitrega pomikanja Z-osi: 33 m/min Pgjdpfsx D Iv Eex Andjn Obdelovanec Premer obdelovanca nad posteljo: 800 mm Premer obdelovanca: 600 mm Orodja Število mest v magazinu: 12 Ta triosni horizontalni stružni stroj, izdelan leta 2020, je opremljen s krmiljenjem Siemens 840D in doseže hitrost vretena do 3.600 vrt/min. Omogoča največji stružni premer 600 mm in dolžino 2.000 mm. Opremljen je s transportnim trakom za odrezke, Siemens CELOS krmilnim sistemom in sistemom za odsesavanje hlapov, zato je idealen za zahtevne strojne operacije. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja DMG MORI CTX 2000. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Stanje: rabljeno, Leto izdelave: 2009, Technical Details: Turning diameter: 1000 mm Swing diameter: 1000 mm 1. Technical Data Machine type: Vertical Turning Lathe (VTL) Manufacturer: Hessapp Model: DV 62 Pgjdpfjt Rmdzsx Andsn Serial No.: 14.2308 Spindle Working Range Maximum diameter: 1000 mm Maximum swing diameter: 1000 mm Cross Slide Travels Vertical slide stroke: 900 mm Horizontal slide stroke: 1810 mm Total travel: 2315 mm Spindle Spindle nose with centering cone per DIN 55021 A15 Spindle diameter at front bearing: 203 mm Main Drive Via controlled asynchronous motor and gear drive with range selector. Spindle Speeds Speed range I: 5 - 350 rpm Speed range II: 30 - 1000 rpm Traverse Speed X/Z-Axis: 10 m/min W1-Axis: 8 rpm No C-axis

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled Pgodpfxeuhatpj Andjn - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. Inspection by a qualified company of the buyer is recommended.