Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Price: €2,697 Working area: 2000 x 1000 mm Load capacity: 3,000 kg Weight: 348 kg Side panel height: 100 mm Tabletop thickness: 12 mm Hole diameter: 16 mm OUR PREMIUM TABLE SYSTEMS WITH 16MM HOLE GRID SET THE STANDARD FOR COMMERCIAL AND INDUSTRIAL USE. THE 3D MODELS FORM THE BASIS OF THE ENTIRE SYSTEM, WHICH CAN BE EXTENDED IN ANY DIRECTION ALONG ALL FIVE SIDES. Psdeyq Srrepfx Ah Isgi Our tables stand out due to their high degree of hardness with the NEW CR75M+ SURFACE, an extremely high accuracy level of +/- 0.05 mm across the entire table surface, and tight tolerances for all drilled holes in the grid pattern. 3D Standard Welding and Clamping Table, 2000 x 1000 x 200 mm with hardening coating Cr75M+ Table system: 16mm Material thickness: 12mm Special anti-adhesion surface treatment against welding spatter Including table substructure and standard table legs * S355J2+N steel with Cr75M+ hardening process * Hole diameter: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel height 100 mm with double-row hole pattern and 25 mm hole spacing * Tabletop with dual fine scaling and 50 x 50 mm grid lines * Rounded edges and holes * Heavy-duty standard table legs with 1 t load capacity per leg; for caster models, 500 kg per leg

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Price: €4,862 Working area: 3000 x 1500 mm Load capacity: 3000 kg Weight: 755 kg Side rail height: 100 mm Worktop thickness: 12 mm Borehole diameter: 16 mm OUR PREMIUM TABLE SYSTEMS WITH 16MM HOLE SYSTEM SET THE STANDARD FOR COMMERCIAL AND INDUSTRIAL USE. THE 3D MODELS FORM THE BASIS OF THE ENTIRE SYSTEM. EXPANSION IS POSSIBLE IN ALL FIVE DIRECTIONS. Our tables stand out due to their high degree of hardness with the NEW CR75M+ SURFACE, the very high accuracy of +/- 0.05 mm across the entire tabletop, and the tight tolerances of the borehole diameters in the full hole grid. 3D Standard Welding and Clamping Table, 3000 x 1500 x 100 mm with Cr75M+ hardened coating Psdeyq Srlopfx Ah Ijgi Table system: 16 mm Material thickness: 12 mm Special anti-stick effect against welding spatter thanks to the surface coating Including table underframe and standard table legs * S355J2+N with Cr75M+ hardening * Borehole: 16 mm, material thickness: 12 mm * Including coated table underframe * Side rail 100 mm with 2-row hole pattern and 25 mm hole spacing * Tabletop with double-sided fine scale and 50 x 50 mm grid lines * Edges and holes rounded and finished * Heavy-duty standard table legs, load capacity 1 t per leg; for caster version, 500 kg per leg

Stanje: novo, Condition: new Delivery time: approx. 2 weeks from order Price: €3,165 Bore diameter: 28 mm Accessory set consisting of: 8 pcs. Screw clamp 180° HIS28Z3000 4 pcs. Screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. Quick-release short locating pin HIS28SB100 4 pcs. Connecting pin HIS28BS100 2 pcs. Magnetic pin HIS28MB100 Pgodeyq Sq Ispfx Ah Iei 4 pcs. Stop bar 150 mm HIS28FA150 6 pcs. Stop bar 225 mm HIS28FA225 4 pcs. Stop angle 175 mm HIS28WA175 2 pcs. Stop angle 275 mm HIS28WA175275 1 pc. Stop angle left HIS28WA325L 1 pc. Stop angle right HIS28WA325R 1 pc. Supporting angle 800 HIS28W800L 1 pc. Supporting angle 800 HIS28W800R 1 pc. Cleaning brush nylon HIS28RB 1 pc. Torch holder HIS28BH and 1 maintenance kit (comprising 1x HIS-Cleaner-1L and 1x HIS-Premium-1L) OPTION: Tool trolley HIS28WW1000 €545

Stanje: novo, Condition: new Delivery time: approx. 6–8 weeks from order Price: €10,265 Leasing rate: €197.09 Pgedpfxjyq Sqzs Ah Ioi Working area: 4000 x 2000 mm Table height: 850 mm Load capacity: 8000 kg Weight: 2340 kg Height of side panels: 200 mm Bore diameter: 28 mm OUR PREMIUM TABLE SYSTEMS WITH 28MM HOLE GRID SET THE STANDARD FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS. THE 3D MODELS FORM THE FOUNDATION OF THE ENTIRE SYSTEM, WHICH CAN BE EXPANDED IN ANY DIRECTION ON ALL FIVE SIDES. * Fully milled table top, 25 mm thick, made of S355J2+N for high precision (+/- 0.05 mm) with rounded edges and bores * HARD CHROMED TABLE SURFACE CR75M+ Thanks to a longer and more intensive hardening process, our new CR75M+ finish provides an even denser chrome structure, further enhancing the well-known properties and improving durability. The matte surface is not only more resistant to visual wear, but also significantly tougher against scratches and impacts. The proven and advantageous property of a minimum hardness of 750 HV, as well as electrical conductivity, are of course retained. * Precise dimensional and fitting accuracy for tooling with 28 mm bore (compatible with comparable premium brands) * Grid lines: 100 x 100 mm * Robust standard table legs included, supporting 2 tons per leg; with optional caster model, 700 kg per leg * Various leg versions available (standard, height-adjustable, with castors) * 200 mm high side panels all around, with 3-row hole pattern (top/bottom, 50 mm intervals) * Double-sided millimeter scale * Substructure with reinforcement * Load capacity: 8 tons

Stanje: novo, Zustand neu Lieferzeit ca. 2 - 4 Wochen ab Auftrag Preis 2.590 € Bohrung 16 mm Das Set für den täglichen und universellen Einsatz mit einem umfangreichen Sortiment an Zwingen, Winkeln und Spannmöglichkeiten. Inklusive Werkzeugwagen für den optimalen und schnellen Arbeitsablauf. Bestehend aus: 10 Stück Schraubzwinge 180° HIS16Z3000 4 Stück Schraubzwinge 45° HIS16Z3045 4 Stück V-Auflage HIS16VP100 8 Stück Anschlagwinkel 90x37,5mm HIS16WA9037 8 Stück Anschlagwinkel 90x90mm HIS16WA9090 2 Stück Anschlagwinkel 300mm HIS16WA300 1 Stück Anschlagwinkel 500mm HIS16WA500L 1 Stück Anschlagwinkel 500mm HIS16WA500R 4 Stück Anschlagleiste 75mm HIS16FA075 8 Stück Anschlagleiste 115mm HIS16FA115 28 Stück Schnellspannbolzen kurz HIS16SB100 Pedpfxsyq Sqho Ah Iegi 1 Stück Reinigungsbürste HIS16RB 1 Stück Brennerhalter HIS16BH 1 Stück Reiniger HIS-Cleaner-1L 1 Stück Anti-Haftmittel HIS-Premium-1L

Stanje: novo, Stanje: novo Dobavni rok ca. 2 – 4 tedne po naročilu Cena: 1.725 € Premer izvrtine: 16 mm Napredni začetni komplet s dodano vrednostjo v konfiguraciji seta za najpogostejše delovne postopke in aplikacije. Sestavljen iz: 8 kos vijačnih spon 180° HIS16Z3000 2 kosa vijačna spona 45° HIS16Z3045 2 kosa V-podpore HIS16VP100 4 kosi kotni omejevalnik 90x37,5 mm HIS16WA9037 6 kosov kotni omejevalnik 90x90 mm HIS16WA9090 2 kosa kotni omejevalnik 300 mm HIS16WA300 Pgjdoyq Sqbjpfx Ah Iei 2 kosa omejevalni trak 75 mm HIS16FA075 8 kosov omejevalni trak 115 mm HIS16FA115 20 kosov hitrovpenjalni zatič kratek HIS16SB100 1 kos čistilna krtača HIS16RB 1 kos nosilec gorilnika HIS16BH 1 kos čistilo HIS-Cleaner-1L 1 kos zaščitno sredstvo proti prijemanju HIS-Premium-1L MOŽNOST: Voziček za orodje HIS16WW1000 € 449,--

Stanje: novo, Stanje: novo Dobavni rok: približno 2 - 4 tedne od naročila Cena: 929 € Vrtanje: 16 mm Vstopni komplet za vse, ki želijo delati profesionalno in učinkovito, vsebuje najpomembnejše orodje kot osnovno opremo. Pgedeyq Sp Ropfx Ah Iji Sestavljeno iz: 4 kos vijačna spona 180° HIS16Z3000 4 kos kotni omejevalnik 90x37,5mm HIS16WA9037 4 kos kotni omejevalnik 90x90mm HIS16WA9090 4 kos omejevalna letvica 115mm HIS16FA115 12 kos kratki hitrovpenjalni zatiči HIS16SB100 1 kos čistilna krtača HIS16RB 1 kos držalo za gorilnik HIS16BH 1 kos čistilo HIS-Cleaner-1L 1 kos sredstvo proti prijemanju HIS-Premium-1L MOŽNOST: Voziček za orodje HIS16WW1000 449 €

Stanje: rabljeno, Condition: used Stock number: 2468D Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €2,970 In stock: 1 Special price: €1,890 Weight: 195 kg Bore diameter: 28 mm DEMO SET / AS NEW CONDITION comprising: * 1x accessory trolley (galvanised upon delivery) Pgodpfx Ajyq Spqjh Isi * 4x fixed stop angles 350 x 20 mm * 4x adjustable stop angles 250 x 20 mm * 15x adjustable clamps * 4x multi-purpose clamps * 6x adjustable upright angles 175 x 20 mm * 2x adjustable upright angles 225 x 21 mm * 8x stop bars 225 x 20 mm * 10x locking pins * 15x plug holders * 3x ball tension bolts * 4x claw tension bolts 28 x 100 mm * 15x spacer rings

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, delovno območje: 6.000 mm, najv. debelina pločevine: 35 mm, širina gosenic: 2.000 mm, dolžina mize: 6.000 mm, rezalni tok: 260 A, Ponujamo rabljeno, zanesljivo in popolnoma delujočo plazemsko rezalno napravo znamke Messer Multitherm eco 3100, letnik: 2013. Proizvajalec: Messer Model: Messer Multitherm eco 3100 Pgsdpfx Aoyvgdysh Iji Letnik izdelave: 2013 Stanje: pripravljeno za uporabo Tip stroja: plazemski rezalni stroj Možen prevzem: 08/2026 Opis: Moč vira: 260 A Dimenzija mize: 2 x 12 m, rezanje pločevine debeline do 35 mm Programska oprema: Omniwin 2025 Redno servisirano Predpriprava za avtogeno rezanje Možnost preizkusa po dogovoru Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, skupna višina: 680 mm, skupna širina: 340 mm, skupna dolžina: 680 mm, vhodna napetost: 230 V, skupna masa: 38 kg, vrsta hlajenja: zrak, električna varovalka: 16 A, laserska moč: 800 W, dolžina gredi: 1.080 mm, neprekinjena moč: 800 kW (1.087,70 KM), Oprema: dokumentacija / priročnik, zaščita za glavo, Operation - Simplest operation via synergic characteristic curves - Three steps to achieve a finished weld result. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. Integrated help function provides better understanding of the adjustment options - Fully integrated operation in the wire feed unit – control options via the main machine or the wire feed unit Technical Specifications - 20µm single-mode laser source - High-performance laser cells combined with gas-cooled torches ensure maximum power and focus stability. - 2-in-1 machine: welding and cleaning. Laser cleaning is perfect for paint removal, derusting, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency-off system - Dual-channel safety interface for access control (door contact switches) - Key switch prevents unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety instructions and manual laser release activation required for each start - Dual push-button activation prevents unintended laser engagement - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Minimal distortion, incredibly fast, exceptionally high quality (even for very thin materials < 1 mm) - Consumes approx. 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced post-processing - One of the lightest torches on the market at approx. 680 g Pedpfx Ajyuvqmoh Isgi - Dual-channel safety loop for maximum safety Advantages of the Craft Laser - Laser cleaning with up to 100 mm scan width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more sending in for servicing needed

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A32404019520, vrsta vhodnega toka: trifazni, vhodna napetost: 230 V, skupna masa: 53 kg, vrsta hlajenja: zrak, laserska moč: 1.500 W, dolžina gredi: 1.080 mm, neprekinjena moč: 1.500 kW (2.039,43 KM), Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, zaščita za glavo, Operation - Simplest operation thanks to synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimum readability of all relevant parameters. Integrated help function provides greater understanding of the adjustment options - Fully integrated control in the wire feeder case – operation via the machine or the wire feeder as desired Technical Features Psdpfx Aheyuvkto Ijgi - High-performance laser cells combined with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning – laser cleaning is perfect for paint removal, derusting, and descaling - Optional: Dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access monitoring (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety instructions as well as manual laser release activation required at every start - Dual-pressure button prevents unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding over Conventional Welding Methods - Minimal distortion, incredibly fast, exceptionally high quality (even with very thin materials < 1 mm) - Consumes approx. 70% less energy - Quick and easy to learn - High process reliability - Massive time savings with significantly reduced post-processing - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of the Craft-Laser - Laser cleaning with up to 100 mm scan width and autofocus - 2-in-1 machine: Welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping required

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Moč resonatorja 3 kW Pgjdpfxoyxc Afe Ah Ioi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Programabilna fokusna optika Proizvajalec: Trumpf Tip: PFO 33-2 R1030-1070 HA Letnik: 2017 f: 255 Q γ: 1030 nm D33 Lokacija: Dresden Pjdpfjtrl Sgsx Ah Isgi

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power output: 200 W – 5000 W Peak power: Up to 6 kW Podpeywwrfofx Ah Ijgi Wavelength: 10.6 micrometres Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at output: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 μs resolution Alignment stability: +/- 150 μrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW —— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapour, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1 CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 micrometers Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Output: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Width: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Maximum ambient temperature: 40 °C • Minimum ambient temperature: 10 °C • Relative humidity: < 95 % (non-condensing) Diode Laser: • Wavelength: 635 nm • Output power: < 1 mW ⸺ 3.2 CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10 %, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar Pgsdjywwq Uepfx Ah Ioi • Nominal inlet pressure: 3 bar • Pressure differential: 1.5 bar • Cooling medium: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gases: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total gas consumption: 20 – 70 SLPH (variable) Other requirements: • < 10 ppm water vapor, hydrocarbons and oxygen • Air: dry – dew point < 2°C • Dependent on shutter utilization

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.000 kg, Demmeler Robotix L Manipulator 3-osni 360° vrtenje, 360° nagib (nadglavni), z nastavljivo višino (skoraj neslišen) Vrhunsko stanje (kot novo) Minimalna višina: cca 486 mm (os nagiba 0° horizontalno) Maksimalna višina: cca 1438 mm (os nagiba 0° horizontalno) Minimalna višina: cca 525 mm (os nagiba navpično) Maksimalna višina: cca 1477 mm (os nagiba navpično) Dolžina spodnje roke 1500 mm (radij) Dolžina zgornje roke 1900 mm (radij) Priključek 16 A vtikač Skupna višina 3250 mm Število obratov cca 0,2 - 2,0 obr/min Navor 24000 Nm Pgodpfx Ahsyupl Dj Isi Hitrost dviga 1,5 m/min. Ročni daljinski upravljalnik

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.000 kg, SEVERT double colonne positionneur rotatif S 40.1-1HH, 2 ensembles disponibles, complets avec documentation pour soudage ou assemblage peut aussi être utilisé comme dispositif de levage et de rotation à une seule colonne (mode Mono) Capacité de charge totale : 2000 daN Capacité de charge par colonne : 1000 daN Couple sur plateau de bridage 1 : 1400 Nm Plateau de bridage 2 en rotation libre, sans entraînement Vitesse de rotation du plateau de bridage : 2,0 min⁻¹ Plateau de bridage 1 : L1070 x H720 x P30 mm (Réf. 20452-001) Plateau de bridage 2 : L1070 x H720 x P30 mm (Réf. 20453-001) Course de levage : 680 mm Vitesse de levage : 2200 mm/min Retour de courant de soudage : 400 A Dimensions B2 Colonne 1 avec socle : Longueur : 970 mm Largeur : 885 mm Hauteur : 2350 mm Poids net : 1200 kg Colonne 2 avec châssis roulant : Longueur : 970 mm Largeur : 1030 mm Pedpfeyupkyex Ah Isgi Hauteur : 2350 mm Poids net : 1600 kg État excellent, documentation complète disponible Nous avons plusieurs dispositifs de levage et de rotation à colonne en stock, capacité de charge de 1 à 15 tonnes 2 ensembles complets (unités) disponibles

Stanje: zelo dobro (rabljeno), nosilnost: 4.000 kg, Oprema: nožno daljinsko upravljanje, Heinrichsglück 4 tone nosilnosti, TOP stanje Varilna vrtljiva miza 4000 kg, kompletni set Nosilnost vodoravno 4000 kg, nosilnost v nagibu 4000 kg Stopenjsko nastavljiv nagib in hitrost vrtenja Zelo robustna Hitrost brezstopenjsko nastavljiva od 0,05 do 1,5 obr./min, digitalni prikaz Premer vrtljive mize 1500 mm Višina vodoravno 1230 mm, nagnjena do sredine 1000 mm Podpfxjyuph Es Ah Iogi Dolžina 2,0 m x širina 1,6 m Ročni daljinski upravljalnik in nožni daljinski upravljalnik

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.000 kg, Oprema: nožno daljinsko upravljanje, 3-osni varilni rotacijski stroj, nosilnost 2 toni, v dobrem stanju vključno z ročnim daljinskim upravljalnikom (po želji tudi nožni) Nagib in hitrost sta brezstopenjsko nastavljiva od 0,05 do 1,0 obr./min Premer vpenjalne plošče: 1,0 meter Višina nagnjen do središča min. cca 0,7 m, vodoravno 0,9 m Višina nagnjen do središča maks. 1,6 m, vodoravno 1,8 m Dolžina 2,2 m, širina 1,35 m Pgedjyupgzepfx Ah Ioi

Stanje: rabljeno, MIG MAG varilni stroj, zaščitni plinski varilni stroj CLOOS tip GLC 357 N MIG MAG varilni izvor tovarniška št. 576 leto izdelave cca 1985 Nazivna moč: 350 A Moč: 350 A - 80% ED 310 A - 100% ED nastavitveno območje: brezstopenjsko Paket cevovodov: 4,5 metra Napajanje: 380 V, 50 Hz, 32 A vtič - 2-taktni in 4-taktni varilni način - Zunanji podajalnik žice tipa CK 72 ZK z dvojnim pogonom valjev in 4,5-metrskim paketom cevi - 3-metrski cevni paket s centralnim priključkom in ročnim gorilnikom CLOOS - Vodno hlajenje - Tlačni manometer za plinsko jeklenko - Varilni stroj opremljen z 1 mm varilno žico Mere D x Š x V: 1250 x 600 x 1100 mm Teža: 260 kg Stroj testiran – deluje brezhibno Pedpfehubg Tex Ah Isgi

Stanje: rabljeno, Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding machine with inverter welding power source Serial No. Year of manufacture: 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Adjustment range stepless Power supply 400 Volt, 50 Hz, 32 Amp plug - Separate 4-roller wire feeder with connecting hose package - Digital display for voltage and current - Pulse welding function with single and double pulse - 2-stroke and 4-stroke welding modes - 4 meter Binzel hose package with central connection - Water-cooled Pedpfx Aswa Uwdsh Isgi - Shielding gas pressure regulator - MIG/MAG pulsed arc welding - MSG double pulse welding - MIG/MAG welding Required space (L x W x H): 1150 x 510 x 1350 mm Weight: 200 kg Good condition

Stanje: rabljeno, Spot welding tong with DALEX RS 17 controller and balancer Spot welding tong DALEX Type A 3139 Manufacturing No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Welding power max.: 22.4 kVA Open-circuit voltage: 2.9 Volt Electrode force max.: 200 daN Short-circuit current max.: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6 / 12.5 mm Electrode gap max.: 230 mm - Tong with water cooling - without cooling unit - cooling water requirement: 1.5 liters/min. - Suspension device Balancer DALEX Type D4-21 Weight of welding tong: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS No.: 0413-410 Serial No.: 41341000278 Year of manufacture: 2006 Pgedpfx Ahsyxrhds Isi Operating modes: Single (EP) / Series (SP) Squeeze, hold, off, and pause times: each 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter adjustment: via arrow keys - with solenoid valve control - Current setting via phase angle control - Welding controller in sheet metal wall cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Oprema: nožno daljinsko upravljanje, 3-osni varilni vrtljivi stroj PEMA APS 1500 - neprekinljivo nastavljiva višina - vključuje ročni daljinski upravljalnik - maksimalna nosilnost 15.000 N - 1.500 kg - hitrost vrtenja 0,07 - 1,3 obr/min - rotacijski navor 1.000 Nm - hidravlično nagibanje do 135° - moment nagiba 3.000 N Pgsdsyupd Hspfx Ah Iji - maksimalni varilni tok 700 A - premer plošče 700 mm - višina 780 - 1.550 mm - mere 1.640 x 810 mm - priključek 3 x 400 V / CEE 16A - teža 730 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EN 60204-1, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 10 mm, največja višina reza: 20 mm, dolžina mize: 3.000 mm, delovna širina: 1.500 mm, širina mize: 1.500 mm, trajanje garancije: 12 meseci, delovna dolžina: 3.000 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, vrsta nastavitve višine: električni, We are offering this well-maintained Hugong INTECUT-HT plasma cutting machine / CNC gantry cutting system KAI-TEC Smart, including marking function, year of manufacture 2025, as we are upgrading to a larger system. The machine was purchased for a single project and has been in operation since August 2025. The manufacturer's warranty is valid until August 2026. The system is fully functional, in perfect technical condition, and shows no signs of excessive wear. Normal signs of usage are present. It has become too small for our operations, but it is ideally suited for smaller metal fabrication shops, metalworking businesses, or workshops. Technical Data & Equipment - CNC Gantry Cutting System KAI-TEC Smart - Cutting area: approx. 1,500 × 3,000 mm - CNC controller with cutting database - Plasmasystem NEOCUT 105 with marking function - Plasma cutting range: 1–20 mm mild steel (stainless steel & aluminum max. 10 mm) - Machine torch incl. hose package - Automatic torch height control - Laser pointer - FastCam7 nesting software - DXF / DWG import - Auto-nesting function - Remnant plate nesting - Cutting cost calculation Accessories ✅ Spare and consumable parts are included (e.g. nozzles, electrodes, and other accessories – immediately ready for use) Other Information - Selling due to acquisition of a new system - Viewing and test run available by arrangement - Pickup by buyer - Price plus VAT Legal Information The sale is made under exclusion of any liability for material defects. No warranty, no guarantee, no returns. Pgedpeyux Hqjfx Ah Iji If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of Manufacture: Week 51/2023 - Commissioning: 2024 4,000 Watt Solid-State (Fiber) Laser Operating Hours: As new, used ADVANCED EQUIPMENT: 30 m LLK TruDisk 4001 (Solid-State, Fiber) with 1 LLK-A 1 pc, incl. cooling unit, incl. laser welding safety package Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine Combination Nozzle Positioners: Infinite rotary-tilt positioner Zero-point clamping system for rotary-tilt positioner Protective enclosure extended to 4,800 x 4,800 mm (front x side dimensions) Data Transfer: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator Compressed air and shielding gas supply Machine suitable for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Weld process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production planner Touch panel with 21.5'' TFT color display Touchpoint user interface Data Transmission: USB interface RJ-45 network interface Central Link Remote Support Interface Online Update Manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASIC EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis alignment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of Axes: 6 Rated Payload: 70 kg Repeatability: +/- 0.05 mm Rotary-Tilt Positioner Max. Work Area: 2,000 x 1,000 mm x 1,200 mm Max. Loading: 500 kg Turntable Max. Work Area: 2,350 mm (diameter) Max. Work Area (height): 1,150 mm Max. Loading (per side): 250 kg Rotary Changer with Swivel Axis Max. Work Area (swivel drum diameter): 1,200 mm Max. Work Area (length): 2,600 mm Max. Loading (per side): 750 kg Swivel Positioner Max. Work Area (swivel drum diameter): 2,000 mm Max. Work Area (length): 4,000 mm Max. Loading (per side): 1,000 kg Compact Rotary Changer with 3D Clamping Plate (rectangular) Max. Work Area (diameter): 3,000 mm Pgsdpfxjw U Ezze Ah Isi Max. Work Area (height): 1,250 mm Max. Loading (per side): 600 kg Max. Load Inertia: 600 kg*m2 Rotary Changer Swivel Range: +/- 180° Rotary Changer Swivel Time (for 180°): 3.7 s Insertion Height: 830 mm Compact rotary changer with vertical rotary axes: Max. Work Area (diameter): 3,000 mm Max. Work Area (height): 1,250 mm Max. Loading (per side): 600 kg Max. Load Inertia, ring rotary table: 600 kg*m2 Rotary Changer Swivel Range: +/- 180° Rotary Changer Swivel Time (for 180°): 3.7 s Vertical Rotary Axes Swivel Range: +/- 190° Max. Load Inertia, vertical rotary axes: 359 kg*m2 Insertion Height: 885 mm CE and EU Machinery Directive must be verified by the buyer upon reinstallation. New Price: Over €580,000 This used machine can be inspected under production conditions. All information provided without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.