Preskušanje materialov nakup rabljenega (482)

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration test system, including an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and CTS climate chamber. Suitable for combined vibration and climate testing in automotive, aerospace, electronics testing, research & development, materials testing, and industrial quality assurance. The blue overhead/gantry crane visible in the photos is not included in the scope of delivery. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic shaker. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Input voltage: 50 Hz: 380 / 400 / 415 / 440 V Duodsy Sy Npjpfx Altjw 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. connected load: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: - Sine - Resonance dwell - Limit control - Random - Sine-on-random - PSD limit control - Shock - Scheduler - System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of construction: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / mounting table included Fully wired test system Service and maintenance documentation available Slip table: Mounting surface: approx. 760 x 850 mm Thread insert spacing: approx. 100 mm Dimensions / Weight Large industrial plant / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only via suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial equipment from industrial application. Visual condition as shown in the photos. Inspection and testing by arrangement on site possible. Scope of delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration controller - Dell Precision PC system - CTS climate chamber CV-70/1100-5 - Slip table / mounting table - Accessories and documents as shown in the photos Not included: Blue overhead crane / gantry crane. Loading by arrangement possible. Commercial sale without warranty. Subject to changes, errors and prior sale.

Stanje: zelo dobro (rabljeno), Brüel & Kjær LDS Dactron LAS 200 Krmilni sistem za tresljaje / sistem za nadzor vibracij Rabljeni LDS Dactron LASER USB krmilni sistem za elektrodinamične sisteme za preizkušanje vibracij in preizkusne sisteme tresljajev. Sistem je primeren za naključne, sinusne, resonančne, šok in dolgotrajne teste v laboratorijih, razvojnih oddelkih in testnih centrih. Proizvajalec / model Proizvajalec: LDS Dactron / Brüel & Kjær Tip: LASER USB Model: LAS 200 Izdelano v ZDA Nameščena programska oprema Dujdpfx Aley T Iv Hstsw Shaker Control verzija 8.1001 Library verzija 6.3120 Omogočeni moduli Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Dodatne možnosti Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Tehnični podatki 8 aktivnih vhodnih kanalov 2 izhodna kanala Vzročna frekvenca (sampling rate): 96 kHz A/D ločljivost: 24 bit USB 2.0 vmesnik Vhodni tipi: Volt / ICP / TEDS Kalibracija Zadnja kalibracija po prikazu sistema: 20.09.2023 Prikazan rok poteka: 19.09.2024 Dimenzije Krmilnik cca. 430 x 350 x 90 mm (Š x G x V) Teža cca. 6 - 8 kg Obseg dobave LDS Dactron LASER USB krmilnik Acer prenosnik z nameščeno programsko opremo Povezovalni kabli in dodatki kot prikazano na slikah Stanje Rabljeno / Used Optično stanje po slikah. Prisotne običajne sledi skladiščenja in uporabe. Obseg dobave kot na slikah. Spremembe in napake v tehničnih podatkih in podanih informacijah pridržane. Prodano lahko tudi predhodno.

Leto izdelave: 2020, obratovalne ure: 6.126 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, hours of operation: 6,126 h. Description: For sale is a high-quality climatic test chamber by Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance testing The chamber can produce both extremely low temperatures down to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control enables reproducible test conditions. Operation is convenient via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Uniform temperature distribution in the test chamber - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and hour meter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to 5 K/min High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side ports: 50 cm / 125 cm Dujdpfxoyxm Uls Altow Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: - R449A (approx. 2.9 kg) - R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss WT-1300/70/15 temperaturna preizkusna komora Proizvajalec: Weiss Umwelttechnik GmbH Tip: WT-1300/70/15 Vodno hlajena temperaturna preizkusna komora z upravljanjem preko zaslona na dotik za temperaturna testiranja v raziskavah, razvoju, kontroli kakovosti ter industriji. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Prostornina preizkusne komore: pribl. 1340 litrov Hitrost spreminjanja temperature - gretje: 15 K/min Hitrost spreminjanja temperature - hlajenje: 10 K/min Časovna temperaturna odstopanja: ± 0,1 do ± 0,5 K Prostorska temperaturna homogenost: ± 0,5 do ± 2 K Dimenzije preizkusne komore: Višina 920 mm Širina 1100 mm Globina 1330 mm Dedpfx Aljza Dv Ijtsuw Zunanje dimenzije: Višina pribl. 2050 mm Širina pribl. 1300 mm Globina pribl. 3200 mm Dovoljena obremenitev preizkusnega blaga: Tla preizkusne komore 150 kg Vstavljiva rešetka 50 kg Električni podatki Nazivna napetost: 3/N/PE AC 400 V ±10 % 50 Hz Nazivni tok: 63 A Nazivna moč: 44 kW Hladilni sistem Hladilno sredstvo R404A: 14,0 kg Hladilno sredstvo R23: 5,4 kg R404A LP maks.: 18 bar R404A HP maks.: 25 bar R23 LP maks.: 19 bar R23 HP maks.: 25 bar Statični tlak: 18,5 bar Oprema Upravljanje preko zaslona na dotik Preizkusna komora iz nerjavečega jekla Več vstavnih nivojev Stranski prehod Ogrevano vratno tesnilo Vodno hlajeni hladilni agregat CEE-priključek CE-označevanje Teža: pribl. 1500 kg Stanje Rabljena naprava iz industrijske uporabe. Vizualno stanje skladno s fotografijami. Za varnost naših strank se na ponujenih klimatskih komorah vnaprej izvedejo naslednja dela: 1. Preverjanje delovanja ter menjava potrebnih komponent 2. Po potrebi ponovno polnjenje s skladnim hladilnim sredstvom 3. Preizkus tesnosti z izdanim certifikatom 4. Dokumentiran testni zagon po uspešnem pregledu Obseg dobave: glejte slike Na voljo je pošiljanje ali pošiljanje s špediterjem. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja vam z veseljem svetujemo po telefonu.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h For sale is a used temperature test chamber from Weiss Technik. The chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of the designation: T = temperature test chamber 1000 = approx. 1000-liter volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Dodpfxey Dck Tj Alteuw Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, the following measures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change, errors and omissions excepted!) If you have further questions, we will be happy to answer them by phone.

Leto izdelave: 2021, obratovalne ure: 5.018 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, Year of manufacture: 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000-liter capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change speed (series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Observation window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: - Cooling: approx. 6 K/min - Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important safety information for buyers! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) Dusdpfxey Dclqe Altjw (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled For sale is a used temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This model is a temperature-only test chamber without humidity function. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is commonly used in industry, research & development, and quality assurance. Temperature range: -70°C to +180°C. The unit heats up and cools down quickly and utilizes recirculating air for uniform temperature distribution inside the chamber. Cable ports of 125 mm and 50 mm are available. Technical Data: - Model: WT-600/70/5 - Cooling/heating operation: -70°C to +180°C - Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min - External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm - External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Dsdjy At Sxspfx Altsuw - Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm - Test chamber volume: approx. 600 liters - Power supply: 3/N/PE AC 400V ±10% 50Hz - Rated power: 16 kW - Rated current: 19 A - Fuse (on-site): 29 A slow-blow - Maximum test specimen weight: Total load on shelf supports: 80 kg Test chamber floor: 80 kg, removable shelf: 40 kg - Refrigerants: R 404A / R23 - Weight: 675 kg Important information for buyers – your safety matters to us! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful testing, all chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Technical specifications and details are subject to change without notice. Errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a used temperature test chamber from the manufacturer Weiss, model WT-1000/70/5. The unit is designed for precise temperature testing in industrial and laboratory environments and is suitable for applications in research, development, and quality assurance. The chamber enables reproducible temperature cycles over an extended temperature range and is particularly suited for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Device type: Temperature test chamber Temperature range: -70 °C to +180 °C Temperature deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load on chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10 % / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High temperature change rate Duedsy D Nyuopfx Altow - Industrial design Condition Used, with age- and usage-related signs of wear. Service / Inspection The following work is carried out for quality assurance on the offered equipment: - Functional check and replacement of necessary components - Refilling with legally compliant refrigerant if required - Leak test with certification - Documented test run after successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown in the pictures Notes - Connection via 400 V three-phase current required - Transport by freight carrier necessary due to size and weight - Sale from commercial stock - All information supplied without liability - Subject to prior sale For further information, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclic temperature testing Technical data: Type: TSS-70/350-A Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -70°C to +100°C Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 20.4 kW - Rated current: approx. 36.5 A Refrigeration system: - Refrigerant: R404A / R23 - Pre-cooling stage: approx. 6.0 kg - Cooling stage: approx. 3.0 kg - water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital display of set and actual values - 2-zone system (hot and cold chambers) - Automatic specimen carrier for shock tests Technical specification: - Hot and cold chambers separated - Carrier system for rapid temperature change - Test space made of stainless steel - Shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: - External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm - Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm - Weight: approx. 2500 kg Dodpfx Aley Hkgbstsuw Additional data: - Protection class: IP 54 - Operating overpressure: approx. 25 bar - Test pressure: approx. 27.5 bar Safety information for buyers: The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit manufactured by Weiss Umwelttechnik. The system is designed for standardized water, spray water, and ingress protection testing according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industrial, automotive, electronics, quality assurance, R&D, test laboratories, research, and material testing applications. Operation is via an integrated touch control panel. Test procedures can be performed automatically. System Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test Types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Available test accessories Electrical Data Supply Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated Power: 17 kW Rated Current: 30 A Wiring Diagram No.: 82962 CE marking available Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable approx. 80 to 100 bar Technical Data Rotation table speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10°C to 35°C Noise level: approx. 88 dB(A) Heat dissipation to surroundings: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Spray ring/nozzle ring High pressure unit Flow meter ESD earth bonding point CE marking Robust industry-grade construction Dimensions / Weight Test chamber SWT 600/800: Approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: Approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high pressure unit: Approx. 850 x 1,200 x 800 mm Weight of high pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documentation Operating manual EC declaration of conformity Quality inspection certificate Technical documentation as shown in the pictures Accessories Spray ring/nozzle ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation and papers Condition Used equipment from industrial use. Visual condition as shown in the pictures. The system can be powered on. Display and control interface are operational and visible. No further technical inspection, calibration, or complete functional testing has been carried out. Inspection and testing on site by appointment are possible and recommended. Scope of Delivery Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Rotating table and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures Dusdpfx Alezachcjtew The table shown in the photos is not included. Loading by arrangement possible. Transport and shipping by suitable forwarding agent required. Dimensions, weights, and technical data are partly taken from documentation. Data may vary. Commercial sale without warranty. Subject to change, error, and prior sale.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation: 4500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1280 mm x Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Dusdpfx Aljyu Rhgjtjw Sound level at 1 m distance (free-field measurement): < 63 dB(A) Side access ports: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Model: CTS CW+40/7/7 Walk-In Climatic Chamber CTS Walk-In Climatic Chamber 7m³ Temperature & Humidity Testing 40–90°C Description: For sale is an industrial-grade walk-in climate and temperature test chamber CTS CW+40/7/7. The system is designed to simulate defined temperature and climatic conditions for the testing of materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, with either constant or programmable test cycles possible. High air circulation ensures uniform climate distribution throughout the test area. The walk-in design enables testing of large components or complete systems. Technical Data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial No.: 113011 Year of manufacture: 06 / 2011 Version: Walk-in climatic test chamber Test volume: 2 × 7 m³ Electrical Data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic Data: Temperature range: +40 °C to +90 °C Humidity range: 10% to 90% rH Dew point range: +30 °C to +87 °C Protection class: IP44 Internal Dimensions: Width: 1,400 mm, Depth: 1,300 mm, Height: 2,250 mm Total External Dimensions: Width: 3,511 mm, Depth: 2,765 mm, Height: approx. 2,515 mm Additional Technical Data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Duodpfx Aleylmametew Heating: Stainless steel heating elements Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2,000 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) Please feel free to contact us for further questions.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to examine components and materials under various temperature conditions (e.g., cold, heat, ageing). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000-litre volume 70 = Low-temperature range (-70°C) e = Energy-optimised design 5 = Temperature change rate (series) Equipment: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Djdpfx Aley Dd Nqotjuw Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alteration and errors in technical data. Further details available on request!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Dodpfx Aljy H Hmwstouw Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, AKE technologies Shaker System za vozila Proizvajalec: AKE technologies GmbH Tip: Shaker System za vozila Leto izdelave: 2020 Naprodaj je profesionalni shaker sistem za vozila za preiskave vibracij, resonance in NVH (Noise, Vibration & Harshness). Naprava je namenjena za izvajanje ponovljivih preskusov vibracij in obremenitev na vozilih, sklopih in komponentah. Sistem omogoča simulacijo vibracij vozila, cestnih vplivov, resonanc ter razvoja hrupa pod nadzorovanimi pogoji testiranja. Tehnični podatki Obratovalna napetost: 3 x 400 V AC / 50 Hz Krmilna napetost: 24 V DC Moč: cca. 4 kW Dovod stisnjenega zraka: 6 bar Poraba stisnjenega zraka: cca. 0,3 m³/min Teža celotne naprave: cca. 4.000 kg Dvižni in pozicijski sistem: cca. 1.000 kg nosilnosti na dvižno mizo glede na dokumentacijo Podatki o shakerju AKE HPS350 High-Power Shaker Frekvenčno območje: DC do 3.000 Hz Dinamična sila: do cca. 2,6 kN Statična sila: cca. 11 kN Hod: cca. 5,5 mm Peak-to-Peak Maks. hitrost: cca. 0,74 m/s Maks. pospešek: do cca. 22 g Lastna frekvenca: cca. 65 Hz Programska oprema Vibration Research VibrationVIEW AKE Drive File Manager Odklenjene funkcije: 8 vhodnih kanalov Sinus do 4900 Hz Naključno do 4900 Hz FDR do 4900 Hz Sinus multi-kanalno Naključno multi-kanalno Dual Loop Control Oprema Industrijska krmilna omara z močnostno elektroniko Upravljalni računalnik Enote High-Power Shaker Nosilci za vozila Dvižne in pozicijske naprave Dvižni stebri s prečno prečko Merilna in senzorska tehnika Upravljalne in zasilne enote Področja uporabe NVH analize Preskusi vibracij Resonančne preiskave Analiza hrupa Testiranje komponent Dolgotrajni preskusi Raziskave in razvoj Stanje Rabljena naprava iz industrijske uporabe. Vizualno stanje glejte slike. Obseg dobave AKE Shaker System za vozila Krmilni in upravljalni sistem Industrijska krmilna omara Upravljalni računalnik Nameščena testna programska oprema Enote High-Power Shaker Nosilci za vozila Dvižne in pozicijske naprave Dvižni stebri s prečno prečko Dodpfxezazm Ro Altouw Merilni, krmilni in povezovalni kabli Dokumentacija in podatkovni nosilec s programsko opremo Orodje in dodatki skladno s slikami Stanje Rabljena naprava iz industrijske uporabe. Naprava je bila demontirana in shranjena. Vizualno stanje po slikah. Obseg dobave kot prikazano. Pomembno opozorilo: Vsi podatki so navedeni po najboljšem vedenju na podlagi razpoložljive dokumentacije, prikazov programske opreme in tablic s podatki. Možna so odstopanja v tehničnih podatkih. Možna dostava oziroma dostava s špedicijo. Spremembe, napake in predhodna prodaja pridržani. Za dodatna vprašanja nas lahko kontaktirate po telefonu.

Stanje: zelo dobro (rabljeno), Liebisch SKBWF 1000 A-TR naprava za preizkus korozije Proizvajalec: Gebr. Liebisch GmbH & Co. KG Tip: SKBWF 1000 A-TR Naprava za preizkus korozije / solna pršna komora za preskuse z razprševanjem soli, kondenzacijsko vodo in kombinirane preskuse. Tehnični podatki Prostornina preskusne komore: pribl. 1000 litrov Zunanje mere: pribl. 2600 x 1120 x 1210 mm Notranje mere: pribl. 1535/1425 x 800/780 x 660/650 mm Največja nosilnost vzorcev: 10 kg na nivo Napetost: 400 V Frekvenca: 50 - 60 Hz Faze: 3~ Nazivni tok: 12 A Nazivna moč po tipski tablici: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Rezervoar za preskusno raztopino: pribl. 150 litrov Poraba destilirane vode za vlažilec: pribl. 80 - 120 ml/h Duodpfx Alszba N Totew Poraba preskusne raztopine: pribl. 0,7 - 1,0 l/h Polnjenje vode v talni koriti: pribl. 15 litrov Preskusni postopki DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Oprema Avtomatsko krmiljenje Touchpanel / upravljalna plošča Preskusna komora iz GFK Rešetke za vzorce Nosilci vzorcev Priključki za temperaturo, vlago, stisnjen zrak in testno raztopino Priklop za NaCl preskusno raztopino Priklop za deionizirano vodo Stanje Rabljena naprava iz industrijske uporabe. Vizualno stanje glede na slike. Ogled možen po dogovoru. Obseg dobave: (glej sliko) Dostava ali pošiljanje s špediterjem možno. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Za dodatna vprašanja smo na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale: Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in a range from -40°C to +180°C, providing an efficient alternative to custom-built solutions. Technical Specifications: Temperature range: -40°C to +180°C Test chamber volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cool-down time from +180°C to -40°C: approx. 110 minutes Test Chamber: Internal dimensions: Approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: Approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: Dujdpfx Alsy Nicmstjw 2 x cable ports, Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of Delivery: Scope of delivery as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sale without warranty. (Subject to technical changes and errors)

Stanje: dober (rabljeno), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Model: Presumably HK-400 Controller: ADWEST KÖHLER PC102 Designation: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion testing, designed for use in industrial, research, development, and quality assurance applications. This test system is suitable for the examination of components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to the KÖHLER HK-400 model, intended for salt spray and condensation testing. Technical Data: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: Ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment: ADWEST KÖHLER PC102 controller Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial design Possible Test Procedures: Salt spray test Condensation water test Kesternich corrosion test Dusdpfxoy N R Tas Altsw Corrosion testing of coatings and metal parts Automotive and industrial testing Condition: Used machine with age- and use-related signs of wear. Visual condition as shown in the photos. Important Note: The original manufacturer’s nameplate was not present on the unit. The technical information has been compiled based on existing labels, photos, and comparable KÖHLER HK-400 manufacturer information. Scope of Delivery: System as pictured Scope of delivery as per the photos Miscellaneous: Inspection by appointment possible. Loading can be organized. Commercial sale – sold without warranty. (Subject to alterations and errors)

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h Dsdpfx Aey El Tteltjuw For sale is a used temperature test chamber from Weiss Technik. The test chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000 liter volume 70 = Low temperature range (-70°C) e = Energy-optimized version 5 = Temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications may be subject to change or error!) Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate Dusdpfx Aljy Hkd Hotjw 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, ageing). Meaning of model designation: T = Temperature test chamber 1000 = approx. 1000 litre volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel inner chamber - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70 °C to +180 °C Temperature change rate: Dujdpey Dclwofx Altow Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important information for buyer safety! The following checks and works are carried out on all chambers we offer before delivery: 1. Functional testing and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for professional continuous operation. For sale is a professional climate test chamber by Weiss Technik, Model WK 5/55-120 from year 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range of 10–95% rH, the chamber covers a wide spectrum of applications. The spacious test volume of approx. 5 m³ also allows testing of larger components or assemblies. Technical Highlights: • Temperature range: -55°C to +120°C • Climate range: 10–95% relative humidity • Heating/cooling rate: approx. 1.5 K/min • Water cooling required Technical Data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume Test chamber volume: approx. 5 m³ External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55°C to +120°C Heating/cooling rate: approx. 1.5 K/min Climate range: 10–95% rH Dew point range: +4°C to +85°C Electrical Data: Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: approx. 47 kW (depending on configuration) Nominal current: 71 A Customer-side protection: 63 A Cooling water: Dedpfxjziztue Altouw Water cooling required Maximum cooling water consumption: approx. 7 m³/h Inlet temperature: approx. 20°C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: • Weiss Technik climate test chamber WK 5/55-120 • Control panel • Operating manual (German) • Nameplate & documentation Condition: used Scope of supply: (See photo) (Specifications and technical details subject to change and errors excepted!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Dsdpszizr Rofx Altouw Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Short – Why This Device Stands Out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Test Type: Tensile and Compression Testing Technical Specifications: Crosshead Speed: 0.001 – 1,000 mm/min Speed Accuracy: 0.01% of Vnenn Travel Resolution: 0.038 µm Positioning Repeatability: < 2.0 µm Maximum Test Frequency: 0.5 Hz Measuring Rate: 500 Hz Data Transfer to PC: 10–100 Hz Force Measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Test Area Width: 440 mm Test Area Height (lower): 1,050 mm Weight with typical accessories: approx. 160 kg Electrical Data: Adjustable Mains Voltage: 100–250 V Mains Frequency: 50 / 60 Hz Power Consumption: 800 VA Current at 230 V: approx. 3.4 A Fuse: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Test Temperature: 23.3 °C Displacement System: Incremental Encoder (rotary) Load Cell Installed 29.01.2014 Load Cell: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Load Cell: Xforce P Module: DCSC Pre-series Rotation: 120° testXpert Control Documented service and calibration reports available. Software & Control: Software: testXpert® II Documented Version: V3.2 Installation documentation from Version 2.2 Documentation as of: March 2010 PC Control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial test software. Installed Modules & Components: DCSC Measurement Module Xforce P / Xforce HP Load Cell Incremental Encoder (rotary displacement system) Force measurement in compliance with ISO 7500-1 Mounted below moving crosshead Duodpfszizrkox Altew Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of Delivery: Material Testing Machine BT1-FB010TN.D30 PC with monitor Load cell DCSC module Specimen grips / clamps Adapters and holders Tools Documentation folder with documents Delivery as depicted in the photos. (Subject to technical modifications and errors!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber Djdpfx Aeziznfjltsuw - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Short – Why This Device Stands Out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.