Izravnalne in upogibne stiskalnice nakup rabljenega (75)

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 275 t, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Machine weight approx.: 40 t Retraction force: 27 t Maximum pump capacity: Axial pump with proportional valve Bridge travel distance: 6,000 mm Lateral travel range of the cylinder: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Isdofxyigspfx Adketd Maximum distance table to ram: 1,100 mm Oil tank: 450 l Bridge travel speed: on X and Y, 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder moves via a servomotor using rack and pinion: 40 mm Control system Siemens: S7 1200 Siemens Monitor 9": Touch Panel Control panel: portable

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 400 t, Press force: 400 t Upright distance: 2,500 mm Isdpfxsd Ttydj Adketd Stroke: 600 mm Table size: 2,500 x 2,000 mm Distance table - ram (bottom dead center): 600 mm Total power requirement: 18 kW Forward speed: 9 mm/sec Return speed: 19 mm/sec Pump capacity: 67 L/min Total weight approx.: 26 t

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Itsdpfx Aeyk Utljdkod Pressure: 40 t

Stanje: rabljeno, Leto izdelave: 1966, Tlak 10 t Miza za pritrjevanje 1.800 x 205 mm Hod bata 150 mm Širina bata 50 mm Izsev 150 mm Količina olja 75 l Priključna moč 380 V / 50 Hz Prostor potrebujemo cca. 2,0 x 1,0 x 2,10 m Ravnalna stiskalnica Itedpfx Adoymp R Rjkod EITEL - RP 10

Stanje: novo, Pressure: 40 t Iodpfx Adeymf Nvokstd Max. stroke: 300 mm Max. bending capacity - flat: 250 x 16 mm Working speed: 10 mm/sec Control: NC Tool height: 250 mm Total power requirement: 4 kW Machine weight approx. 1190 kg Space requirement approx. 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press with a wide range of combination options. Whether bending pipes, punching profiles, or cutting sheet metal – with the appropriate accessories, the HP 40 is a multifunctional machine among presses. Standard equipment: - Ergonomic tool clamping table - Quick tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC Control Highlights: - Control panel with digital display - Quick tool change - Hardened support pins - Hydraulic speed regulation The HP 40 is manufactured in Turkey by a renowned producer for our sales brand "GERD WOLLF Maschinenfabrik". The photos are for reference only and do not represent the machine to scale.

Stanje: novo, Pressure: 20 t Max. stroke: 200 mm Max. bending capacity – flat: 200 x 10 mm Working speed: 10 mm/sec Control: NC Tool height: 150 mm Total power requirement: 2.2 kW Machine weight: approx. 640 kg Space required: approx. 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with a wide range of combination options. Whether it’s pipe bending, profile punching, or sheet metal cutting – with the right accessories, the HP 20 is a multifunctional machine among presses. Itsdjymf Iljpfx Adked Standard equipment - Ergonomic tool clamping table - Easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control Highlights - Control panel with digital display - Simple tool change - Hardened support pins - Hydraulic speed regulation The HD 180 is manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer in Turkey.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8,800 x 1,800 x 2,200 mm Pressure adjustment via rotary control, infinitely variable: 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely variable via joystick): 0-9.9 mm/s Isdpfxefxygws Adkstd Servo motor: 2 kW Cooling unit: 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is set up for the respective material type by exchangeable rounded spacer elements. The ten inserts are changed manually by simply sliding them into the retaining grooves. The scope of delivery includes a basic set for one profile. The program for the respective profile is then called up on the monitor. The monitor displays the ideal line along with a rising and falling millimeter scale with 0.5 mm divisions. The profile to be straightened is placed on the table to the left, pushed against a stop, and clamped in place using a quick-clamping device. Both the stop and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Movement is provided by a chain drive and a servo motor. The motion is initiated via a joystick on the control panel. Once the profile is clamped, the operator moves the clamping plate with the joystick into the press. The travel speed is up to 100 mm per second but can be continuously decreased to 10 mm per second; for this, it is sufficient to only lightly move the control lever. A high-resolution camera now displays the profile in the press. The operator can see precisely any deviation from the ideal line. Depending on requirements, the operator pushes or pulls the profile to achieve the desired accuracy. They then slowly move it further through the press while detailed feedback on the monitor shows if the profile is now straight. As needed, further corrections can be made by moving forwards or backwards. Once the profile is straightened, it exits the press on the right and can be removed. The clamping plate can then be returned to the loading position on the left, or—in order to save time—may be loaded from the right. Operation of the press is permitted only under the following conditions: Permissible ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Installation site elevation above sea level: + 1,000 m Permissible mains fluctuations: +/- 10%

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer Iedpfef Sqckex Adkotd - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0369, stiskalna sila: 220 t, Pressure: 220 t Passage width: 1500 mm Stroke: 400 mm Approx. machine weight: 5.2 t Dimensions (L x W x H): approx. 4000 x 1950 x 2900 mm Return force: 20 t Total power requirement: 30 kW Max. working height: 500 mm Max. advance speed: 10 mm Pressing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Ram plate: 2000 x 400 mm Table plate: 2000 x 600 mm Table height above floor: approx. 900 mm Oil tank: 500 l Oil cooling (electric): 1.5 kW (max) Position measurement system: TURCK or Balluff Control: SIEMENS S7 1500 or PILZ PSS 4000 Itodpfx Adofxyivskjd Monitor: SIEMENS or OMRON

Stanje: rabljeno, Technical Details: Pressure: 2.5 t Reach/Throat Depth: 155 mm Maximum Ram Stroke: 280 mm Distance Table to Ram: 450 mm Clamping Plate on Table: 260 x 1000 mm Ram Advance Speed: 0.08 m/s Ram Return Speed: 0.32 m/s Ram Bore: Ø 20 x 45 mm Height Above Floor: 930 mm Itsdpsu Nfv Uefx Adksd Total Power Requirement: 1.1 kW Machine Weight approx.: 500 kg Machine Dimensions (LxWxH) approx.: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. Itjdpfx Aofh R N Dodkod The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: novo, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH, 20 TON CAPACITY Max Capacity: 20 tons Rapid Approach Speed: 1,700 mm/min Working Speed (slow): 440 mm/min Cylinder Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Thread: M14 Tank Capacity: 30 liters Maximum Pressure: 350 bar Voltage: 400 V Frequency: 50–60 Hz Motor Power: 1.5 kW Maximum Absorbed Current: 3.8 A Iedpfx Adjrvz A Sokotd Weight: 200 kg

Stanje: rabljeno, Tehnične podrobnosti: Tlak: 63 t Izboklina: 350 mm Hod: 400 mm Vgradna višina: 650 mm Skupna potrebna moč: 8 kW Teža stroja pribl.: 4 t Prostorska zahteva pribl.: 3 x 1,9 x 2,7 m Iedpfxeyizw Uo Adketd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Used straightening press in very good condition for sale. Ijdjufhzvjpfx Adkotd This universal and robust Stierli straightening press is equipped with a 5 m straightening beam. This allows you to process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated via the proven Stierli stroke fine adjustment control. This makes it very easy to use and enables fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyor, NC control, laser measurement, etc. (Note: The photo does not show the actual machine.)

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Specifications: Itsdpekvmi Sjfx Adkjd Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Stanje: rabljeno, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial No. 42615 Year of manufacture: 1984 Refurbished in 2025 Isdpfxeydqd He Adketd Pressing force: 40 tons Ram stroke: 300 mm Piston rod: Ø 80 mm Working height: 780 mm (floor to centre of piston rod) Table size without pressure pieces: approx. 1000 x 290 mm Mounting dimension ram + press frame to support: 260 mm (with pressure pieces on ram and support) Mounting dimension ram without press frame to support: 440 mm (without pressure pieces on support) Height of the two adjustable pressure pieces: 130 mm Pressure piece width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Hydraulic tank: approx. 60 litres Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke manually operated via control lever, sensitive adjustment via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke with position display, digitally readable. Ideal for precise repetition of pressure points during straightening - 2 pieces of adjustable supports via threaded spindle (central parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure surface - Centrally height-adjustable material feed rollers via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg Very good condition

Stanje: novo, Leto izdelave: 2025, OMCN P30/SA hydraulic press with dual-speed manual hand pump, 30 tons. The OMCN P30/SA hydraulic press is operated manually via a two-speed hand pump and features a robust base frame for maximum stability and minimal floor space requirements. Thanks to its slotted frame, the support base is height-adjustable to 9 different positions, allowing the press to handle components of various sizes. The winch makes lifting the worktable practical and fast. +Fast approach stroke +High precision Itjdpfeklyvtex Adkod An essential tool for workshops and industrial environments, perfect for pressing metal parts such as assembling mechanical groups, fitting bearings or pulleys onto shafts. Made in Italy, CE certified, constructed with high-grade materials to ensure long-term reliability. The press can generate a force of 30,000 kg. Dimensions 2180 x 1300 x 600 mm Weight 280 kg Capacity 30 tons Distance between uprights 695 mm Ram stroke 190 mm Ram diameter 60 mm

Stanje: pripravljen za uporabo (rabljen), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm; max. forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downward: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Iedpfxotia Hho Adketd

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €66,700 Leasing rate: €1,260.63 Pressing force: 150 t Stroke: 500 mm Table: 1,550 x 2,000 mm Mounting height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Length: 2,350 mm Width: 2,000 mm Height: 2,500 mm Weight: 4,100 kg Cylinder fixed or horizontally movable Clear gap between uprights: 1,550 mm Horizontally movable cylinder: 1,000 mm Ijdpjwirpiefx Adkotd Hydraulically movable frame: 1,300 mm Horizontally movable cylinder Hydraulically movable frame Operation via hand lever and control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: Worktable welded to base frame, with holes on the surface Control panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Wireless remote control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8, or 10 units) Anti-rotation device for the ram 2 speeds for frame and cylinder movement Oil cooler and decompression valve

Stanje: novo, Leto izdelave: 2025, OMCN 100 Ton Electro-Hydraulic Press Mod. 164/R Made in Italy ELECTRO-HYDRAULIC DOUBLE-SPEED PRESS AUTOMATIC, EQUIPPED WITH PRESSURE GAUGE Hydraulic press with high-speed motor, featuring a manometer and a double-speed hydraulic power unit. Rapid approach and return are achieved using a vane pump, while the working phase operates via an axial piston pump. Equipped with a pressure adjustment valve and a three-position control lever (advance - neutral - return). Itsdpfx Aofh R Nysdkjd The machine is supplied with oil and features a winch for lifting the working table. The piston rod is made of specially treated and chrome-plated steel. The press is fitted with a two-hand control system and concurrency protection in accordance with current safety standards. Included are rear and side safety guarding panels. Fully CE approved, with electromagnetic compatibility. Piston stroke: 310 mm Clearance (internal opening): 1,010 mm

Stanje: dober (rabljeno), Leto izdelave: 1991, Hydraulic horizontal straightening and bending press Ijdecffzaepfx Adketd Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. For further technical specifications, please refer to the data sheets.

Leto izdelave: 2023, stanje: novo, DPM 1070 x 150ton Hydravlična delavniška stiskalnica, kapaciteta: 100 ton Na voljo so tudi številne druge dimenzije in kapacitete. Iedpfjgyta Hox Adkjtd • Varjen okvir iz jekla • Enostavno upravljanje • Možnost zaustavitve v katerem koli položaju • Tlačni manometer • Varnostni ventil proti preobremenitvi • Standardni V-bloki (2 kosa) • Nastavljiva višina mize • Priključek za gibanje mize gor-dol • Upravljanje s posebnim joystickom • Premikanje bata levo-desno ročno (DK) • Izdelano v skladu z EC varnostnimi direktivami, ima CE • Uporabniški priročnik

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Main Cylinder Press Capacity: 200 t - Maximum operating pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder movement: 1450 mm - Max. longitudinal frame movement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic unit power: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in the delivery - Hydraulic units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter by FILTREC - Oil filter by FILTREC - Air and water (cooler) cooling system for hydraulics - Stroke cylinders integrated in the worktable Rod diameter: 25 mm - Stroke: 80 mm - Controlled via cylinder control system or hydraulic unit with lever control - 10 stroke cylinders installed - Digital control with position measurement via encoder and pressure measurement with value display - Siemens KTP 900 9" touchscreen display for programming (up to 99 programs): - Maximum cylinder stroke up/down - Pressure dwell time at bottom table - Decompression time - Setting the working pressure - Piece counter - Pre-stop up/down stroke accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time display of process parameters - Remote control unit with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power unit with solenoid valves (replaces hanging control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is SIEMENS (S7-1200 series) - Siemens 9" MTP900 LCD touchscreen integrated in control cabinet - Electrical equipment from SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via the LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved; all the above-mentioned values can be programmed in each recipe - Activation via remote control - Double button for slow or fast up/down movement, emergency stop, and maneuver confirmation switch - Safety light curtain is mounted at the bottom of the portal columns - Control cabinet mounted on side wall of bridge - Anti-rotation lock for the cylinder - Oil temperature is displayed on the LCD touchscreen - Overtemperature warning for hydraulic oil is displayed on the LCD touchscreen - Filter contamination status is displayed on the LCD touchscreen - System errors are displayed on the LCD touchscreen - Press status information is displayed on the LCD touchscreen - As soon as oil temperature reaches 45 °C, the air cooler starts to cool the oil. At 65 °C, the machine stops operation until it cools back down to operating temperature - An operating manual is included in the scope of delivery - The system fulfills all essential safety and health requirements according to CE regulations. Ijdpfx Aexrb Nbjdkjtd

Stanje: novo, Pressure: 60 t Max. stroke: 300 mm Max. bending capacity (flat): 300 x 16 mm Working speed: 10 mm/sec Control: NC Tool height: 300 mm Total power requirement: 5.5 kW Machine weight approx.: 1,530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press brake with a wide range of combination options. Whether tube bending, profile punching, or sheet metal cutting – with the appropriate accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction-hardened support pins - NC control Highlights - control panel with digital display - easy tool change - hardened support pins - hydraulic speed control Ijdpfxjxfb Iko Adketd The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer in Turkey. The images are for orientation purposes only and do not represent scale-accurate depictions of the machine.

Stanje: rabljeno, Technical details: Itodpfxsu Nfrps Adkjd Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x W:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press Eccentric Bending Machine - Jaw holder: LxW 1200 x 220 mm - Jaw adjustment: 200 mm, traversable - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, shims, angle stops, and marking gauges Included as per list (i.D.).