Tehnologija sestavljanja komponent nakup rabljenega (145)

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Seho 8040 PCS with laminar and turbulent solder wave, preheating via heating plates and IR emitters, minimal-quantity fluxing system, exiting component cooler, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, solder pot heating power: 9kW, heat-up time 20-250°C: approx. 150min, heat-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, conveyor angle: manually adjustable, 6-8°, conveyor speed: 0.5-2m/min, running direction: left to right, with loading aid/pusher conveyor (1000mm), unloading aid (500mm), and infeed stopper for solder frame separation, extraction port diameter: 2x 150mm, extraction capacity per port: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). Equipped with microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines x 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & MES data backup, interface for MES data collection via serial printer, control circuit for transport and heating systems. Dimensions: length: 2300mm, width: 825mm, height: 1615mm, weight without solder: 400kg. Hjdpfxjw Uk Aqo Abhsh

Stanje: pripravljen za uporabo (rabljen), SMT Pick-and-Place sistem, ki ga je mogoče uporabiti kot samostojni ali inline stroj. S posamezno glavo z laserskim centriranjem, kamero, usmerjeno navzgor, in zaslonom. Napetost: 230V, stroj je bil redno vzdrževan, z dodatno opremo. Možen je ogled na lokaciji. Hedpfew Snd Hjx Abhoh

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Two Automa-Tech (Altix) exposure machines for the PCB industry are available. 1) ZG 357, transport direction: right-to-left, min. panel dimensions X/Y: 530mm/385mm, max. panel dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV lamp output: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact exposure unit ZG 386, min. panel dimensions X/Y/Z: 525mm/351mm/0.5mm, max. panel dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine comes with a comprehensive and extensive spare parts package. In addition, numerous spare parts for the ZG series (not specific to these machines) are available. Documentation is included. An on-site inspection is possible. Machines and spare parts may be purchased individually. Hsdpfxsvft Rbs Abheh

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), An SMD placer i-Pulse with IQ Vision, a Yamaha subsidiary, is available. PCB thickness range: 0.4mm–4.8mm, minimum PCB dimensions X/Y: 50mm/30mm, maximum PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production capacity: 24,000 CPH. Placement accuracy for CHIP: +/-0.04mm, placement accuracy for IC: +/-0.025mm, placement angle: +/-180°, maximum component size range: 0402–120mm/90mm, maximum component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Includes 3x feeder carts and 2x tray feeders for installation in the machine. Documentation available. On-site inspection possible. Hjdswf Nywjpfx Abhsh

Stanje: pripravljen za uporabo (rabljen), Solder volume: approx. 400 kg, wave width: 400 mm, usable working width: 390 mm, max. component height: 100 mm, max. PCB length: 562 mm, pot heating power: 9 kW, heating time from 20°C–250°C/190°C–250°C: 150 min/60 min, transport speed: 2 m/min, power requirement: 18.5 kW. Machine dimensions L/W/H: approx. 2300 mm/850 mm/1650 mm, empty weight: approx. 450 kg. Documentation available. Hsdpfx Absud Svzjhoh

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), Resolution X/Y (3D and 2D): 21μm/10.5μm, Illumination: multispectral, multidirectional, Component clearance above/below PCB: 40mm/100mm, Max. inspection speed: 50cm²/s, Inspection area X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, Weight: approx. 500kg, Software: OptiCon Pilot 5.3. Includes calibration tool, manuals, camera, lighting units, and repair software for error visualization. Computer was replaced in 2012. Documentation available. Hedpfx Abstz Dkyjheh

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), Heads: 4, Feeder slots: 58, Placement accuracy: +/-0.01 mm, Production capacity: 6000 CPH, Camera field of view X/Y at 20 µm resolution: 48 mm/40 mm, Machine dimensions X/Y/Z: approx. 1000 mm/760 mm/600 mm, Weight: approx. 100 kg. Documentation available. On-site inspection possible. Hodpfxjuhqchj Abhoh

Stanje: pripravljen za uporabo (rabljen), Components per hour: 480,000, image field dimensions (FOV): 61.1 x 44.9 mm², PCB dimensions: 50–533 x 50–609 mm, PCB thickness: 0.5–4 mm, max. PCB weight: 3 kg, clamping clearance for PCB clamping: 3 mm, component clearance under the camera: 34 mm, component clearance under the PCB: 60 mm. Length: 1110 mm, width: 1351 mm, height: 1892 mm, weight: 900 kg. Without loader and unloader. On-site inspection is possible. Hjdpfx Abjwb E Sbsheh

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Heating zones: 7, Transport width: 400 mm, Transport speed: 1500 mm/min, Nitrogen consumption at 250°C: approx. 15 m³/h, Nitrogen purity: 99.999%, Cooling zones: 2. Machine dimensions (L/W/H): approx. 3300 mm / 1400 mm / 1500 mm, Weight: approx. 2000 kg. Hodpfoud Svuox Abhjh

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), A placement line is available, consisting of three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer, and one (1) DEK screen printer. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, maximum placement rate: 3,000 components/hour, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s–1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, maximum placement rate: 10,000 components/hour, placement accuracy: +/-0.05mm, PCB dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Zevatech/Juki TR4NEZ tray changer, year of manufacture: 1995. Hodpfx Abetz Di Nehoh 4) SMD screen printer DEK 265, year of manufacture: 1995, printing method: stencil printing, max. PCB size: 450mm/340mm, print accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of an integrated system and controlled by the same PC. On the screen printer, the amplifier board of the front squeegee axis is defective. Documentation is available.

Stanje: rabljeno, Leto izdelave: 1998, Short loader Bar diameter 12–72 mm Hjdjvvuu Nspfx Abhsh

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AAY366, skupna masa: 900 kg, Oprema: Na voljo je tipska ploščica, Prodajamo naš sistem EROWA, ker ga ne potrebujemo več. Prej je bil priključen na naš DMG65H in je odlično deloval. Robot je bil posodobljen na zadnjo verzijo programske opreme. Po dogovoru je možno prevzeti tudi vpenjala. Stroj je trenutno v skladišču in ga je odklopil serviser Erowa. Vsa dokumentacija in knjige so na voljo. Na voljo je tudi specifikacija vmesnika. Hjdpfx Ajxuh Ddjbheh

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. Hedpofz Nb Tjfx Abhoh This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Technical details available on request. Hodpfxog Uwx Ro Abheh

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), Connected load: 18 kW, but it was completely overhauled in 2017. An inspection is possible. Hjdpfxsn Htkte Abheh

Stanje: rabljeno, A packaging machine is being offered for sale. The machine is capable of packaging goods either in cartons or in bags. Hedeur N Ncepfx Abhoh

Leto izdelave: 2017, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1 kos JUKI KE 3010 AL Pick & Place z vozički za podajalnike Hodpfsw R Ulbsx Abhoh 1 kos JUKI KE 3020 VAL Pick & Place z vozički za podajalnike Razpoložljivi podajalniki: 8 x 2mm korak* 140 kosov * Tipi: CF05HP in CF03HPR 8 x 4mm korak * 240 kosov Tip CF081E 12mm 30 kosov * FF12FS 16mm 30 kosov * FF16FS 24mm 14 kosov * FF24FS 32mm 3 kosi * FF32FR-OP 44mm 4 kosi * FF44FR-OP 56mm 1 kos * FF56FR-OP V primeru interesa smo vam na voljo za dodatna vprašanja.

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, FUJI AIM fleksibilni postavljalec s feeder vozičkom MFU 4 postavljalne glave (H12 S- H12S- H04- H01) Enota za pladnje tipa L pribl. 3.200 delovnih ur / demo stroj Ogled mogoč po dogovoru Hsdpfx Abew Rz Trjhjh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Na prodaj je portalna naprava za avtomatizirano opremljanje ali transport težkih delov. Ta portalna naprava je primerna za različne naloge opremljanja (rezkalni stroji / stružnice / lakirne linije / varilni sistemi). Hedswdnb Dspfx Abhsh Hod v osi X – 11,6 metra, hod v osi Y – 2,38 metra, hod v osi Z – 2,5 metra. Vse osi so gnane s SEW servomotorji. Servomotorska enojna klešča za kose do 500 kg mase. Krmilna omara – PLC krmiljenje – Siemens S7–1500 ter SEW pogoni. Portalno napravo si je možno po dogovoru ogledati v Overathu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Parts Magazine / Conveyor Belt Manufacturer: Cefla / Delle Vedove Feeding magazine for profiles, parquet, and board material Belt width approx. 300 mm Part length approx. 1000 – 2500 mm Feed motor approx. 0.55 kW Dimensions approx. 2500 x 600 x 1500 mm (LxWxH) Hedpfx Abewxwx Ishoh Weight approx. 250 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Dima MP 200 off-line stroj 14500 CPH 120 mest za hranilnike 0201 QFP Pladnji hranilniki Hodpfjxpv N Rjx Abhoh Thrill hranilniki

Stanje: dober (rabljeno), 2 units available, price per unit!!! Various accessories Hodpfx Abjq I Sf Uehsh

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 04/2008 400 mm working width Finger conveyor Lift and drop station Spray fluxer Dynamic bottom preheating Convection heating Hjdpfxev Ta Hlo Abhoh

Stanje: rabljeno, Hello, Hsdpfxeww Ewvo Abhjh I am selling a used ASYS MPS 100. The unit is fully functional and was operated in an SMT production line, suitable for both SMD and THT assemblies. If you are interested or have any questions, please feel free to contact me.

Leto izdelave: 2016, Stanje: rabljeno,