Stanje: rabljeno, Leto izdelave: 2012, z računalnikom, programsko opremo (programska oprema ne potrebuje dodatnega ključa, je nameščena na računalniku), vključuje različne merilne sonde. Pomembno: storitev ravnanja/demontaže vključuje profesionalno transportno varovanje z originalnimi deli Mitutoyo, s strani tehnikov Mitutoyo, zaščito občutljivih delov npr. z mehurčkasto folijo ter nakladanje na tovornjak. Dedpfsxxwbgjx Afqjcr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, HP 5528A laser interferometer incl. - Laser measurement device with weather station - Mirror for length measurement Dodpfx Afet Saa Eeqecr - Mirror for angle measurement (rotation) - Mirror for straightness measurement - Pentaprism for squareness - Tripod (requires repair) No software included

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.700 mm, skupna dolžina: 1.765 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, priključek za stisnjen zrak: 4 letvica, Wenzel Smart Gear - Gear and 3D Coordinate Measuring Machine Dcedjvvudkspfx Afqer The machine is in very good condition and fully functional. It has been regularly maintained and well cared for. Machine Data: • Machine dimensions: L=1765mm, W=1700mm, H=2232mm • Max. rotary table workpiece diameter: 5 to 270mm • Gear measurement accuracy according to VDI/VDE2612/2613 Group II • Max. rotary table load: 20 daN • Travel ranges: X=500mm, Y=450mm, Z=400mm • Scanning probe head: Renishaw SP600M • 7x SP600 probe change trays included • Module measuring range: 0.4 – 10mm • Active air damping of the machine • Year of manufacture: 2008 • Accessories such as drivers, reference sphere, etc. as pictured • 3-jaw chuck, D=80mm with internal and external jaws • 24-inch monitor, mouse, keyboard The following software modules are included: Gear software: • TMain – Program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Analytical determination of axis positions • TGear – Spur gear measurement program • TGear – Addendum and dedendum circle option • TWorm – Worm gear measuring program 3D Software: • Metrosoft CM 3.8

Stanje: zelo dobro (rabljeno), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR Including carrying case We are offering an original ATC measuring microscope that was originally removed from a TRAUB TNA turning center. The device is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Key features and benefits: • Universal application: Suitable for any CNC machine with a compatible tool holder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be detected and corrected immediately without removing the tool. Dodpfsx Dmr Eex Afqscr • Precise referencing: Useful for checking reference points, bores, and fixtures directly inside the machine setup. • Time savings: Makes external presetting devices unnecessary and reduces downtime. • Compact and robust design: Easy integration and operation within the tool changing system. This ATC measuring microscope transforms your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process safety.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 4.000 mm, merilno območje osi Y: 1.600 mm, merilno območje os Z: 2.100 mm, Hexagon Mercury DCC C1 Djdpexy Iz Hsfx Afqecr Datum izdelave: 4/2014 Model: 40.16.21 Delovno območje: 4000x1600x2100mm Sistem: B3CLC Glava: TesaStar-m Senzor: TP20 Varno razstavljen in pripravljen za transport neposredno s strani Hexagon Metrology.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,002 mm, obremenitev mize: 50 kg, premer vrtljive mize: 500 mm, The offer consists of the following components: VL-770 Sensor High-resolution optical 3D scanner VL-700 Control Unit Control and analysis unit, including software interface VL-C35 Enclosure Light-protection hood VL-A3D Software Package Measurement and analysis software (German) OP-88145 Calibration Plate Reference plate VL-H3G Module Form and position tolerances VL-H3R Module CAD Conversion VL-B1 Accessory Calibration ball gauge OP-99031 Cable AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring Range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY travel of object table: Ø200 mm Tilt mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight control unit: 3.7 kg Weight object table: 26 kg Dcedpfxjxvyyge Afqsr Weight enclosure: 5.5 kg Weight measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Stanje: rabljeno, Leto izdelave: 2005, Lot zajema: (1) CNC koordinatni merilni stroj (3-osi) Tehnične podrobnosti: S PC-jem, programsko opremo in donglom ter različnimi merilnimi sondami. Pomembno: Storitev ravnanja/demontaže vključuje strokovno transportno zavarovanje z originalnimi deli Mitutoyo, ki jo opravijo Mitutoyo tehniki, zavarovanje občutljivih delov npr. z mehurčkasto folijo ter nakladanje na tovornjak. Dedpfxjxxv Hns Afqecr

Stanje: zelo dobro (rabljeno), Shimadzu Shimadzu EZ-LX Universal Testing Machine + Trapezium X Software – 5 kN For sale is a professional material testing system from Shimadzu, Model EZ-LX from the EZ-Test series. The system is suitable for performing tensile, compression, and bending tests on a wide variety of materials. The machine is supplied complete with PC system, monitor, keyboard/mouse, as well as Trapezium X software (version 1.5.1) and comprehensive documentation. Ideal for laboratory, research, quality assurance, or training. Device features: - Tensile and compression testing up to 5 kN - Precise measurement of force and displacement - Fully automatable testing procedures - Generation and analysis of graphs & test reports - Emergency stop button and safety features - Operation via PC with installed software Technical data: Model: Shimadzu EZ-LX Mains voltage: 200–230 V Frequency: 50/60 Hz Power consumption: 850 VA Fuse: 250 V / 5 A (slow-blow) Force capacity: 5 kN Dimensions: approx. 70 × 50 × 150 cm Weight: approx. 55 kg Important note: "The table shown in the photos is not included in the sale." Condition: Used Scope of delivery: (See image) Shimadzu EZ-LX testing machine PC (Lenovo) including monitor, keyboard & mouse Installed Trapezium X software Original manuals and documentation Power cables (Specifications subject to change and errors excepted!) Djdpfx Afjx Dbixoqocr We are happy to answer further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0509, vhodna napetost: 230 V, Naprodaj je analogna prednastavitvena naprava Zoller Bravo 2. Naprava je v dobrem stanju. Prednastavitvena naprava Zoller Bravo 2 Serijska številka: 0509 Leto izdelave: 1999 Dsdpfexwlpcox Afqjcr Napetost: 230 V∼ L/N/PE Frekvenca: 50/60 Hz Toleranca (napetost): −10% do +6% Pnevmatski sistem (stisnjen zrak): 4−6 bar Moč

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used, modernized 3D CNC coordinate measuring machine. ZEISS Contura G2 – Pre-owned system, equipment config freely selectable Measuring machine with movable gantry design Table plate made of granite Modernized with new CNC control, new probe system, new PC and new 3D software running on Windows 11 Pro operating system. Equipment can be tailored individually to your requirements. Further details on request. Measuring range: X = 700 mm – Y = 1,000 mm – Z = 600 mm Measurement uncertainty: MPEE (1): 1.9+L/300 when complying with the environmental conditions specified by the manufacturer. Image still shows the original probe configuration Price: on request Dcjdsxzp U Dopfx Afqer >>> Single unit – available while stocks last

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 300 h, Prices on request XG x 2800 5x Ca E200L 4x CA Dc 40 e System was only used for 90 days – like new condition The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system provides enhanced features and flexibility for demanding inspection applications. Dodpfxor Rddzo Afqscr Technical specifications: Laser scanner / profile measurement: The XG-X2800LJ is specifically designed for profile measurements and 2D/3D image processing. Compatibility: It is compatible with line scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-style programming: The XG-X was developed for advanced users and supports flowchart-style programming. Manuals and software: User manuals and software are available for configuration and customization via PC, as well as remote control and acquisition of images and results on a PC. Please note that the accessories shown are for illustration purposes only and may not be included in the scope of delivery. For more information, please refer to the official KEYENCE website. If you have any further questions or require assistance, please feel free to contact me!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zelo dobra naprava za kalibracijo puščanja v kovčku. Dsdpfx Aoxz R Apefqecr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss Prismo 7 MPS VAST Gold z vrtljivo mizo Letnik: 1999 Retrofit: 2019 Zadnja kalibracija: 6/2021 Merilno območje: X= 900 mm, Y= 1200 mm, Z= 700 mm Krmiljenje C98 z upravljalno konzolo Merilna glava VAST Gold Djdjw Az Syopfx Afqecr Sedem-pozicijski magazin za menjavo tipal Menjalna plošča za tipala Dodatki za tipala Kalibracijska krogla Tehnična dokumentacija Dodatna oprema Delovna postaja z monitorjem Programska oprema Calypso Basic Druge možnosti po izbiri

Stanje: rabljeno, Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete professional LED measurement laboratory by Instrument Systems (Konica-Minolta Group). This system is designed for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, utilizing high-quality industrial-grade measuring technology. Scope / Included Components: • CAS 140C-152 Spectrometer (2008) • Integrating Sphere ISP250-110 + ISP250-211 (2008) • LEDGON 100 Goniophotometer (2007) • CSD315 3-Axis Controller + Emergency Stop Control Panel (2007) • Keithley 2611 SMU / SourceMeter • PC system incl. software: – SpecWin Pro – SpecWin Light – Goniometer module – Original license CDs • User manual "LED test sockets" • Cables & accessories as shown in photos Technical Features: • Measurement of total luminous flux (lumens) • Spectral analysis (color temperature, CRI, xy, spectrum) • Goniophotometric angle measurement • Analysis of emission characteristics • Electrical control and IV measurements with Keithley 2611 • Fully automated measurement sequences with SpecWin Pro Approximate Dimensions / Weights: • CAS140C: approx. 36×15×30 cm / 7–9 kg • Integrating Sphere: approx. 40×40×45 cm / 6–8 kg • LEDGON 100: approx. 80×30×28 cm / 12–15 kg Dedox Da Awopfx Afqocr • CSD315: approx. 42×12×35 cm / 5 kg • Keithley SMU: approx. 36×9×28 cm / 5 kg • Total weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0500237016, vhodna napetost: 400 V, širina gosenic: 300 mm, leto zadnje generalne obnove: 2024, višina krmilne omare: 300 mm, širina krmilne omare: 300 mm, dolžina transportnega traku: 200 mm, višina izdelka (maks.): 250 mm, električna varovalka: 16 A, Prodajamo naš detektor kovin CEIA. Naprava je popolnoma delujoča in jo je podjetje CEIA vsako leto pregledalo. Prodaja zaradi neuporabe. Dcedpjxyzztjfx Afqsr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Popolnoma delujoč merilni projektor. Od prve uporabe leta 2019 je bil zelo redko v uporabi. Umaknjen zaradi pomanjkanja primernega področja uporabe. Obseg dobave je razviden iz priloge. Ogled je možen po predhodni najavi. Pošiljanje ni možno, samo osebni prevzem. Dcedpfjxvz Avox Afqor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Système de traitement d'image comprenant une caméra monochrome 5 millions de pixels (numéro de modèle CA-H500M) et un contrôleur de traitement d'image (numéro de modèle XG-X1500). Le set comprend des câbles et un éclairage de fond blanc (numéro de modèle CA-DSW30). Type : Caméra*1 Élément de capture d'image : capteur CCD monochrome 2/3", capture haute vitesse 11x avec pixels carrés, 5 050 000 pixels Dsdpfx Afomza Iloqocr Taille des cellules : 3,45 x 3,45 µm Nombre de pixels actifs : 4 990 000 pixels 2432 (H) x 2050 (V) Vitesse de transfert des pixels : 130 MHz (65 MHz x 2 canaux) Système de balayage : mode plein cadre (61,2 ms), mode entrelacé (40,3 ms) Système de transmission : transmission série numérique Obturateur électronique : 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, de 0,05 ms à 9000 ms réglable en valeur numérique. Monture d'objectif : monture C

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.200 mm, merilno območje os Z: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with Rotary Table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: - C98 control system with BP26_SE operator panel - VAST GOLD sensor system - 13-position probe changer magazine - Probe change plate - Probe accessories - Calibration sphere - Reference probe Djdpsvdtzdsfx Afqscr - Workstation with monitor - Calypso Basic 5.2 software - Upgrade to current Calypso version and additional options possible - Complete retrofit with C99 and current Calypso version possible - Available at short notice

Stanje: zelo dobro (rabljeno), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measurement system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality control measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main Unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with probe holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measurement ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control Units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probe heads) Software and Documentation: MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operating instructions, training folders, training materials Sample measurements, diagrams, technical briefings This software is designed for the evaluation of contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts: Probe and stylus arm sets Precision probes of various shapes and lengths Spare needles and assembly tools Probe holder with protective box Calibration and reference bodies: Mahr Contour 2 block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/test badge visible (valid until 2026) Dodpfx Asx A Ur Rjfqjcr Typical Voltage Data for the Mahr MarSurf / MidRange / CT Series: MarSurf CD 120 (Contour Measuring Device / Axis Drive) Powered via control unit Internal typically: 24 V DC External power supply via MidRange control unit Mahr MidRange Control Unit (MCP-21 / MCP-22 / MCP-23) This device acts as the central power supply. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Supplied by 24 V DC CT120 / Probing Systems Sensors operate with low voltage 5–24 V DC Powered by the main device (no separate power supply) Accessories, manual control devices, interface boxes Usually 5 V or 24 V DC, depending on the module Weight: approx. 65–73 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Changes and errors in technical data and specifications excepted!) Further questions can be answered by phone.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, For sale is a Cognex camera system designed for demanding OCR assembly verification and defect detection applications. The system has never been used and is sold as a complete set including all accessories as shown in the pictures. Dedpsmx Sl Tjfx Afqscr The model number is IS7802-373-50-LAB // 821-10035-2R and can be researched online for further details. Digital industrial image processing camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstration unit - COGNEX (In-Sight 7000 Gen2 series) - 7802 - 1600x1200 pixels UXGA resolution (1/1.8" CMOS monochrome sensor with global shutter) - 53fps - C-Mount type / S-Mount type - 7.2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28VDC / optocoupler; isolated trigger input) + 3 x digital inputs (15-28VDC / optocoupler; isolated discrete inputs) + 4 x digital outputs (26.4VDC 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (power supply) + 12-pin M12 connector (breakout) + Micro SD card slot - Supply voltage 24VDC - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capabilities - IP67 - aluminum (die-cast) housing - compatible with PatMax RedLine.

Stanje: zelo dobro (rabljeno), GÖTTFERT Device Type: MI-3 (011.01.3) Model/Revision: 01.00-A/R For sale is a Göttfert Melt Flow Index Tester MI-3, Device Type 011.01.3, Revision 01.00-A/R Göttfert is one of the leading manufacturers of polymer testing equipment, especially for MFI/MFR/MVR measurement (melt flow index). This model is used to determine the Melt Flow Rate (MFR) or Melt Volume Rate (MVR) and is designed for quality control of thermoplastics in accordance with ISO 1133 and ASTM D1238. Notice Göttfert MI-3 devices are used worldwide in laboratories for precise MFI/MFR/MVR measurements. Ideal for laboratories, training, research, plastics technology, or as a parts donor. Description / Function: A melt flow index tester measures the flow behavior of plastics under defined pressure and temperature. Typical applications: - Material quality control - Batch comparison - Analysis of aging & degradation - Research & development The plastic is plasticized in the heated barrel and pressed through a standardized die under a defined load. The measured melt rate serves as a quality benchmark for many plastics. Technical Data (complete) Device Information Model: 11.01.3 Temperature: - Range: 50 to approx. 450 °C (typical for MI-3) - Accuracy: ± 0.1 °C - Stability: ± 0.1–0.2 °C - Multi-zone heating system Measuring System - Standard barrel: Ø 9.550 ± 0.005 mm - Die dimensions: - Length: 8 mm - Opening: Ø 2.095 mm - Very high repeatability (Göttfert standard) - Supports all common MFR/MVR procedures Supported Test Loads (typical model): - Standard: 2.16 kg - Other possible weights: 1.2 / 3.8 / 5 / 10 kg (depending on configuration) Operation: - Integrated color touch display - Graphical test control - Options for automatic cutting device (depending on model) Electrical Data: - Voltage/Frequency: 230 V / 50 Hz Dcedpfex A Tr Ajx Afqor - Power consumption: 870 VA - Can be operated directly on the European power grid Scope of Delivery - Göttfert MI-3 Melt Flow Index Tester - Various accessories & tools (dies, cleaning tools, piston tools, etc.) - Operating manuals - Everything shown in the photos Important Note: "The table shown in the photos is not part of the sale." Condition: used (Specifications and technical data subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Zwick skúšobný stroj na ťah Typ: Z20 Ovládanie BX1-EZ020.A4K-000 Technické údaje: Zdvih: 200 mm Rozmery piestu (V x Š x H): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Príslušenstvo: Extenzometer ClipOn 13,5 mm Extenzometer MFA 25 (teplotný rozsah do +200°C) Počítač + softvér testXpert II V3.5 Klimatická komora: Airtemp LKG-K-TK-50-040/150 Teplotný rozsah: -40°C až +150°C Klimatický teplotný rozsah: 20°C až +90°C Rozsah vlhkosti: 10% až 95% Testovací priestor: 50 litrov Dedpfx Ajx A Aa Aofqecr Rýchlosť zmeny teploty: 1 K/min Chladivo: R404, 5 kg Napätie: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Stav: používaný Celková hmotnosť cca 1500 kg Obsah dodávky: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky vám radi zodpovieme telefonicky. Písomnú objednávku možno zaslať e-mailom alebo faxom.

Stanje: rabljeno, Zwick Tip: HA 50 Dimenzije: V 2685 mm x Š 1040 mm x G 750 mm Postavitvena površina: 1600 cm² Tehnični podatki: Fmax: 50 kN Vmax: 1500 mm/s Delovni prostor - maksimalna višina: 1370 mm Delovni prostor - širina: 565 mm Oprema: Kistler merilnik sile 50 kN preko NI-Labview Hidravlična agregat 280 bar Postavitvena površina: 415 cm² Vpenjalno orodje / nosilec vzorcev prisoten (Univerzalna prirobnica, visokotrdne čeljusti za nosilec vzorcev) Dcjdpfx Aox A Aaijfqjr Računalnik + programska oprema testXpert R V6.0.0 Stanje: rabljeno Obseg dobave: (glejte sliko) Teža cca 1200 kg brez okvirja ipd. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: rabljeno, Zwick Tip: Z30 Tehnični podatki: Skupna višina: 2114 mm, širina: 748 mm, globina: 580 mm Fmax: 30 kN Vmax: 125 mm/s Pribor: Djdpfox Az Sksx Afqjcr Ekstenzometer ClipOn 13,5 mm Ekstenzometer ClipOn 40 mm Računalnik + programska oprema testXpert II V3.5 Skupna teža cca 500 kg Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja nas lahko pokličete.

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was produced in 2022. It is suitable for all types of material testing, such as tensile, compression, and flexure tests in laboratory, industrial, and quality management environments. Technical data for the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Dedpfxox Aqxms Afqecr Nominal test force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Test speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guide, very low noise emission High-resolution, maintenance-free DC motor Electrical supply adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/extension control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series ranks among the precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) - Zwick/Roell ProLine Z010 testing machine - Load cell / compression device - PC system with monitor, keyboard, and mouse - Various testing attachments and accessories (see photos) (Specifications and data are subject to change and error!) For further questions, feel free to contact us by phone.