Stanje: rabljeno, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating Environment Temperature: 22 °C ± 3 °C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h Indoor use only Light Emitting Diode (LED) 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power Supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Cajdpfexqnvrox Afqoa Power: 100 mW Product Safety and Compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications and technical details subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: rabljeno, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for up to 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow distributor: Nano-, capillary, or thermostated micro-flow distributor with flow distributor identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Selectable flow rate range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Gradient delay time: Typically < 1.5 min at 200 nL/min to splitter outlet Max. column pressure: 35 MPa (4900 psi) Wetted materials: Quartz glass, stainless steel (1.4571, 316L), PEEK; Waste line: PTFE, aluminum oxide (Al₂O₃) Safety features: Humidity sensor, gas sensor, and leak sensor for the flow control valve Cedoxtb Efjpfx Afqsaa VWD Optical design: Double-beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: At one wavelength:

Stanje: zelo dobro (rabljeno), Heraeus Incubator Brutschrank We are offering an incubator for sale. Capacity: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Type: B 6030 Condition: used Scope of delivery: (see picture) Csdog Aiq Nepfx Afqeaa (Technical specifications subject to change and errors reserved!) For further questions, please feel free to contact us by phone.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), ABSCIEX AB SCIEX API 4000 Mass Spectrometer Cedpfevdb Sqjx Afqjaa General Information Model: API 4000 Manufacturer: ABSCIEX Category: Mass Spectrometer Description The AB SCIEX API 4000™ LC/MS/MS system uses the TurboIonSpray probe and the atmospheric pressure chemical ionization (APCI) probe to generate ions from liquid samples. The term LC/MS/MS, used for the triple quadrupole series, is a general term for the combined analytical processes of liquid separation and subsequent mass spectrometric analysis. The device is configured to perform complex MS/MS analyses but can also conduct single MS scans (LC/MS) for applications with less stringent analytical requirements. AB Sciex API 4000 The API 4000 LC/MS/MS system enables all MS/MS operating modes for the complete characterization of biopharmaceutical compounds and the specificity required for new drug development. For pharmaceutical and pharmacokinetic samples, MS/MS provides the sensitivity and specificity needed to analyze hundreds of samples per day without extensive sample preparation. For peptides and proteins, molecular weights can be determined with an accuracy better than 0.01% at 200 kDa. (Only suitable for spare parts, as the unit is incomplete!!) Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan Mass Spectrometer Thermo Finnigan GC/MS System Trace MS 2160 with Thermo Finnigan DSQ II Description: Mass Spectrometer Mass range up to m/z 1050 Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Data system: Xcalibur with NIST spectral library Split/splitless injector and PTV injector Direct sample introduction via push rod Caedsvyd S Sspfx Afqoa Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno),

Stanje: zelo dobro (rabljeno), PerkinElmer Lambda 950 UV/Vis/NIR Spectrometer – High-Precision Laboratory Instrument For sale is a PerkinElmer Lambda 950 UV/Vis/NIR spectrometer, a top-tier model designed for demanding measurements in the ultraviolet, visible, and near-infrared spectral ranges. This instrument is ideally suited for material analysis, optical coatings, reflection and transmission measurements, as well as a wide range of applications in research and industry. Key Features: Thanks to its modular design, the device can be optimally adapted to specific measurement tasks – ideal for research facilities, universities, and high-tech industries. Technical Highlights: - Wavelength range: 175 – 3300 nm - Resolution: up to ≤ 0.05 nm (UV/Vis), ≤ 0.20 nm (NIR) - Light sources: Deuterium and tungsten-halogen lamps - Detectors: Photomultiplier (UV/Vis), PbS detector (NIR, Peltier-cooled) - Extremely low stray light: ≤ 0.00007 %T at 220 nm - Modular expandability (integrating sphere, URA, large sample compartments, and more) Technical Specifications: - Dimensions (W × D × H): 1020 mm × 740 mm × 300 mm - Sample compartment (primary): 200 mm × 300 mm × 220 mm (W × D × H) Csdpjw T Sm Uefx Afqoaa - Sample compartment (secondary): 480 mm × 300 mm × 220 mm (W × D × H) - Weight: approx. 77 kg Condition: used Scope of delivery: (see image) - PerkinElmer Lambda 950 spectrometer - Standard accessories (sample holders, cables) - Operating software & manual (Technical specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Julabo Type: FC 600 Technical Data for FC 600 Dimensions (W × D × H): 36 x 54 x 49 cm Weight: 48 kg Temperature Data: Operating temperature range: -20 ... +80°C Temperature stability: ±0.2°C Mains voltage: 230V/50Hz 7 A Performance Data: Heating capacity: 1.2 kW Cooling capacity: +20°C: 0.6 kW, 0°C: 0.34 kW, -10°C: 0.21 kW Refrigerant: R134a Global warming potential: 1430 Fill weight: 290 g Pump output flow rate: 20 l/min Caedpfory Uifjx Afqja Pump output pressure: 0.5 bar Filling volume: 6 to 8 l Condition: used Scope of delivery: (see picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we will be happy to assist you by phone.

Stanje: dober (rabljeno), Thermo Fisher ARCTIC A25 Technical Specifications: Controller Type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling Capacity: 500 W Flow Rate: 17 l/min Pump Type: Pressure pump, suction pump Temperature Range: -25°C to +100°C Max. Pressure: 300 mbar Temperature Stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal Length: 18.4 cm Width: 27.3 cm Internal Width: 17.3 cm Height: 71.1 cm Internal Depth: 20.4 cm Weight: 36.1 kg Electrical Requirements: 230 V, 50 Hz Voltage: 230 V Csdpfx Afjry Ui Hjqoaa Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Subject to modifications and errors in the technical data; all information is without guarantee!) For further questions please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a weathering test device. Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weather resistance of materials under standard, high-temperature, and high-performance conditions. - XENOCHROME filter - XENOSENSIV gearbox - Adjustable lamp output in W/m² - Sample chamber temperature regulated up to 70°C - Measuring sensors at the specimen level: XENOSENSIV E(300-400 nm) and SST - Stationary sensor for sample chamber temperature and relative humidity - Humidification - Spraying system - Water supply with integrated water tank - Electrical specifications: 230V, 50/60Hz - Absorption Filter 7 IR: Continuous mode 40 - 140 W/m², Oscillating mode 21 - 72 W/m² - Window Glass 10 FG: Continuous mode 40 - 110 W/m², Oscillating mode 21 - 57 W/m² - Absorption Filter 4 IR + 3 Window Glass: Continuous mode 40 - 140 W/m², Oscillating mode 21 - 72 W/m² Caodpfxed Dtn Ue Afqsa - Absorption Filter 6 IR + 1 UV: Continuous mode 40 - 140 W/m², Oscillating mode 21 - 72 W/m² - Relative electrical output without XENOSENSIV sensor: continuously regulated to set value 53 - 120% - Sample chamber temperature: 20 - 70°C (depending on selected filter configuration) - Black standard temperature: Continuous mode 25 - 130°C, Oscillating mode 25 - 100°C - Relative humidity: 10% - 95% - Fan speed: 500 - 2500 rpm - Dimensions: 900 x 780 x 1800 mm - Model: Xenotest Alpha LM High Energy - Condition: used - Scope of delivery: (see image) The unit comes from an operating facility in use. For further questions, feel free to contact us by phone. Orders can be placed in writing via email or fax.

Stanje: zelo dobro (rabljeno), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser Laboratory Stand Dissolver Type: GFD 11 LST Intended Use: The machine is designed for mixing powdery solids, liquids, and pastes as well as incorporating fillers. The viscosity range can vary from low-viscosity to paste-like. Machine Design: The laboratory stand dissolver essentially consists of the machine base, the lifting device, the drive for the mixing tool, a telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with controller and compact-controller. In the working position, the vessel (customer-supplied) and the telescopic hood form an enclosed mixing chamber. The hood is equipped with a hose connection suitable for the application. The drive of the mixing tool is equipped with a variable speed adjustment via frequency converter. Arrangement, capacities, and speeds of the motors can be found in the attached project drawing. The display of the compact controller allows you to view the speed of the mixing tool, mixing time / remaining mixing time, mixing sequences, and other functions. Operation Switching the unit on and off is carried out via the corresponding push buttons in the control cabinet. Raising the mixing tool drive Raising is accomplished by activating the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. Once the buttons are released, the arm remains at any chosen height. Lowering the mixing tool drive To lower the lifting arm, the corresponding push buttons (two-hand safety circuit DOWN-DOWN) on the control panel must be pressed. Casded Edm Sopfx Afqsa Changing the mixing tool The mixing tool shaft is equipped with an M8 connection thread. The mixing tool (stirring disk supplied by the customer) can be unscrewed and replaced as required. Technical Data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 rpm via frequency converter Ambient temperature: +5°C to +40°C Degree of protection: IP 54 Container: 1.18 liters, D=100 mm, H=150 mm (75 mm) customer-supplied Mixing tool: Stirring disk (customer-supplied) Control Panel / Display The machine is mainly operated via the compact PLC controller “Vision 560-T25B.” Safety-related functions, such as power disconnection via the main switch, emergency stop, and two-hand operation for opening/closing the mixing chamber, are excluded from this. The control panel consists of an illuminated LCD display and membrane push buttons with tactile feedback. The letter-labeled buttons are programmed with fixed functions, which can be activated at any time regardless of the menu. Once a function is activated, its status appears in the upper right area of the "operation display" menu. The M up and down buttons allow you to cycle through the various menu screens. Type: GFD 11 LST Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and error!) Should you have any further questions, we will gladly assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you an Iridex laser system OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system may result in undesired side effects. OcuLight TX Ophthalmology: - Retinal photocoagulation - Laser trabeculoplasty - Iridotomy - Iridoplasty Otolaryngology: - Stapedectomy - Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser - Excellent efficiency with a powerful 2500 mW of deliverable laser energy enables pulse durations and intervals from 10 to 3000 ms - Offers TrueCW laser pulses for maximum control and precision - Flexible range of delivery devices and wide selection of handpieces for various surgical procedures - Optional remote control and wireless footswitch to reduce clutter and improve ergonomics and control - Quiet operation eliminates distractions - Lightweight and portable design allows easy transport between treatment rooms and offices IRIDEX OcuLight TX Green 532 nm Laser - Green treatment laser: 532 nm - Aiming laser: nominal 632 nm - Cooling: on-demand whisper fan - 10–3000 ms exposure duration and repetition interval - Compatible with EndoProbe, LIO, OtoProbe and SLA - Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW - Weight: 6.4 kg - Length: 15 mm - Width: 30 mm - Height: 30 mm - Type: IRIDEX OcuLight TX - Condition: used Cjdpfxsnp Icaj Afqsaa - Scope of delivery: (see picture) (Technical data and specifications subject to change and errors!) For further questions, we are happy to answer by phone.

Leto izdelave: 2020, Stanje: skoraj kot novo (rabljeno), Here we offer a safety cabinet. The Herasafe 2030i series of biological safety cabinets leverages decades of experience as a global leader in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management. This series represents the most technologically advanced Class II cabinets available on the market. Equipped with intelligent safety features for self-monitoring, an intuitive graphical touchscreen interface, and integrated connectivity to maintain critical performance data, the Herasafe 2030i delivers exceptional performance and unmatched precision for demanding cell culture applications and other sensitive tasks requiring a high level of protection for products, personnel, and the environment. Suitable for work with BSL 1, 2, and 3 pathogens, compliant with EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features include an intuitive touchscreen interface, 20 cm working height, electrically operated sash, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option for a manually adjustable Thermo base, 1.5 m. Dimensions (W x D x H) external: 800 x 1600 x 1536 mm Dimensions (W x D x H) internal: 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / as new (Specifications and technical data subject to change and errors reserved!) Should you have any further questions, we would be happy to assist you by phone. Caodpfx Aoi Dn H Sefqsa

Stanje: rabljeno, Heraeus / Thermo Model: UT 6200 Heraeus / Thermo Heating and Drying Oven Process control up to 300°C Caedew Euwzspfx Afqja External dimensions: Depth 715 mm, Width 895 mm, Height 816 mm Internal chamber dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: supply/exhaust duct connection 40 mm (40 D) Internal chamber volume: 180 liters Steam room: 240 liters 1/PE AC, 230 Volt 50 Hz 12.0 A 2.65 kW Weight: 100 kg Model: UT 6200 Condition: used Scope of delivery: (See picture) (Technical data and information are subject to change and corrections!) For further questions feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1 m monochromator, 2400 g/mm grating in first and second order, 160-800 nm, without IMAGE Quick overview analysis IMAGE: Quick Overview Analysis IMAGE NAVIGATOR for JY 2000-2, Codpfx Afsur Rmvsqjaa JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer reliable high-efficiency 40.68 MHz solid-state generator complete and precise wavelength scan from 160 to 800 nm as standard maximum practical resolving power

Stanje: zelo dobro (rabljeno), Heraeus Drying Oven Hot Air Sterilizer We offer here a Heraeus drying oven / hot air sterilizer. Manufacturer / Model: Heraeus SUT 6060 Specifications: - Temperature range: up to 250°C - Net volume: 52 liters - Weight (empty): 53 kg - Internal dimensions: depth 339 mm, width 403 mm, height 380 mm - External dimensions: depth 535 mm, width 744 mm, height 552 mm - Rated voltage: 230V, rated frequency: 50/60Hz, rated current: 7.1 A, rated power: 1.64 kW - Model: SUT 6060 - Condition: used Codpsg Airfjfx Afqjaa - Scope of delivery: (see picture) (Subject to technical modifications and errors! Specifications may change.) If you have any further questions, we would be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under standard, high-temperature, and high-performance conditions. - XENOSENSIV gearbox - Lamp output control in W/m² - XENOCHROME 320 35–100 W/m² - Sample chamber temperature regulated up to 80°C - Measurement sensors at sample level XENOSENSIV E(300–400 nm) - Humidification / spraying - Water supply with integrated water tank - Sample chamber temperature: ambient – 80°C - Black standard temperature: surface – 130°C - Relative humidity: 10% – 95% - Electrical configuration: 3/N/PE AC 400V ±10% 50–60 Hz - Power connection: 32A - Power consumption: approx. 12kVA - Nominal xenon lamp power: 2200VA - Xenon lamp output: 2800VA - Rated current: 16A - Maximum lamp current: 20A - Dimensions: width 900 mm x depth 1200 mm x height 1800 mm - Maximum sample area: 4000 cm² - Weight: approx. 400kg - Type: Heraeus Atlas Xenotest BETA LM - Condition: used - Scope of delivery: (see picture) Casdpfx Afeg Dglyoqja (Changes and errors in technical data, specifications reserved!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), We are offering an ICS system here. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1 % Flow rate precision: < 0.1 % Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analytical mode only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lbs.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz Cajdpfehh Ibtox Afqsa The system consists of the following components: - ICS-5000 plus Dual Pump - 6-port valve MXP9900-000 - AFC-3000 Automated Fraction Collector - RFC-10 Controller Condition: used Scope of delivery: (See pictured items) (Subject to changes and errors in technical details and specifications!) If you have further questions, please feel free to contact us by phone.

Stanje: rabljeno, Zeiss Model: EVO 50 XVP The instruments in the EVO product family combine advanced scanning electron microscopy with an intuitive operating concept that is equally well-suited for both experienced users and beginners. Thanks to its extensive range of options, EVO can be precisely configured to meet your requirements, whether you are working in life sciences, materials science, or involved in routine industrial quality control and failure analysis. Csdpfsvvtnbox Afqsaa Scanning Electron Microscope EVO 50 XVP, EDX by Oxford Xplore 30 SDD detector, without N-cooling, manufactured 05/2021 Dimensions (D x W x H): 930 x 1930 x 1600 mm 30 mm² sensor size / Resolution 129 MnKa at 100,000 cps Detects elements from Boron to Californium Software: AZtec lite on Windows 10 With drift correction Analyzer for qualitative and quantitative analysis Point ID Mapping Line scan Damping system included—each chamber rated at 116 kg/bar Operating hours: approx. 11,500 hrs PC upgraded to Windows 10 in 05/2021 The scanning electron microscope is fully functional. Weight: 750 kg + 385 kg + 150 kg Condition: used (Specifications and technical data subject to change. Errors excepted!) Please inquire about transport possibilities before purchase. For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), EA Elektro Automatik Caodpfxjuv Ewre Afqja Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4KW) 0-80V 0-200A Technical data: Power supply input: Mains voltage: 115V/230V switchable Mains frequency: 50/60Hz Mains fuse: T2.5A DC input: Input voltage U rated 0…80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power: 1500W at 20°C ambient temperature Input current I rated 0…200A Overvoltage protection limit: 1.1 * U rated Maximum permissible input voltage: 100V Voltage regulation: Setting range: 0…80V Display resolution: 100mV Accuracy

Stanje: zelo dobro (rabljeno), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external data and image transfer. This allows users to quickly and easily obtain detailed information about the composition and morphology of specimen surfaces down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both macrostructure and microstructure analysis are possible. The application range can be significantly extended with special accessories, enabling, for example, analytical investigations in microscopic surface areas. The device can be operated either via conventional control elements or a keyboard and mouse (optional). Electron optics and vacuum control use conventional operation. Image memory functions are controlled via the keyboard or mouse (optional). Centrally positioned on the control panel is a separate info screen for menu display. This manual is intended as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide all users, including those with limited experience, with necessary guidance. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted sample 25 nm - guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted sample 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, un-tilted sample Scope of delivery: (DSM 962 with accessories as shown) Casdofcwwnjpfx Afqea Condition: used (Specifications and technical details subject to change and error!) Please inquire about transport options before purchase. For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Cjdpfen Arm Tex Afqjaa Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Stanje: zelo dobro (rabljeno), EA Elektro Automatik Type: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19″ Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Features: - Auto-ranging (flexible combination of voltage/current up to maximum output) - Remote sense (compensation up to 2.5 V) - Low residual ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical specifications: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Design: 19″ rack, 3U (3 height units) - Efficiency: approx. 93 % - Weight: approx. 20 kg Scope of delivery: (see picture) Cjdpfx Asw S T Rljfqsaa - EA-PS 8080-170 3U power supply - Mains cable (Specifications subject to change or error!) We are happy to answer any further questions by phone.

Stanje: dober (rabljeno), Horiba Type: OBS-ONE -GS02 The OBS-ONE measures exhaust gas concentrations of CO, CO2, THC, NOx, NO2, particulate measurement, exhaust gas flow rate, and GPS data. Exhaust gas analyzer for CO, CO2, NO, NOx Csdpfxouz Tuco Afqeaa Power supply, converts AC to DC for the central unit Control unit, 24V input/output, OBD, LAN connection, interface to other modules, connectivity for analog outputs Particulate measurement Power supply switching unit, switches the power source without interruption External input for 16 thermocouple sensors and 4 voltages Year of manufacture: 2016 Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone.