Hidravlične enostebrične stiskalnice nakup rabljenega (67)

Stanje: rabljeno, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Nkedpfxju Nfuqe Abbjt Table surface: 630 x 500 x 73 mm Passage hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Further technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Pressing force: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster/riser plate: 355 mm Distance table to ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Drop-through opening in table: Ø 100 mm Ram speed, forward: 0.1 m/s Ram speed, return: 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor level: 800 mm Total power requirement: 1.5 kW Approx. machine weight: 370 kg Machine dimensions (LxWxH): approx. 0.8 x 1.2 x 1.9 m Nodou Nfvbopfx Abbokt The C-frame press is mounted on a base table (welded steel sheet). Operation via foot switch. The press has been retrofitted with: - Reel holder for film with pneumatic feed and punching device - FIBRO punching device (plastic disc Ø 47.5 mm for punching) - Foot control

Stanje: rabljeno, Technical details: Pressure: 0.9 t Installation height: Table/ram at top: 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Height above floor: 935 mm Machine weight approx.: - t Machine dimensions approx. LxWxH: 1.2 x 0.8 x 2.1 m Punch holder with M24x60 mm internal thread Nkedpfeu Nfw Ssx Abbjt Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Pressure: 30 t Column clearance (WxD): 600/450 mm Installation height, table/ram at top position: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table surface (LxW): 500 x 700 x Ø 60 mm Ram clamping surface: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total power requirement: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: suitable as a deburring press Other technical features: - Table opening 200x250 mm - Opening in ram Ø 160 mm Nkodpsu Nfmaofx Abbet - Frame clearance width 600 mm and depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Stanje: rabljeno, Leto izdelave: 1978, Technical details: Press force: 160 t Ram stroke - max.: 500 mm Distance table/ram: max. 2,880 mm Nkodpfx Aou Nfq Eobbot Ram speed, forward: 0.03 m/sec Ram speed, return: 0.04 m/sec Ram surface: W: 1,720 x H: 1,000 mm Ram diameter: Ø 259 mm Ram bore, center hole: Ø 180 mm Operating pressure: 260 bar total power requirement: 11.0 kW Machine weight approx.: 18.8 t Machine dimensions approx. LxWxH: 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Specifications on the counterblock: Size W: 1,720 x H: 690 mm Counterblock lower mount = Ø 225 mm x depth = 450 mm Horizontal manual displacement: max. length 2,880 mm Specifications for the guide cylinders: 2 opposing cylinders; size Ø 230 mm x length 3,350 mm, 7 cylinders separated by adjustment groove Ø 170 x 50 mm, manually repositionable using the adjusting ring Specifications for the support bed: Steel construction, welded with 2 guiding grooves 20 mm; size LxWxH: 4,000 x 1,400 x 200 mm

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Nodpsu Nfvujfx Abbjkt Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O.

Stanje: rabljeno, Technical details: Pressure: 2.3 t Stroke: 280 mm Throat depth: 155 mm Maximum ram stroke - forward: 0.08 m/sec Installation height with bolster plate (ram/top): 355 mm Nksdpfxou Nfwlj Abbst Distance table/ram: max. 355 mm Bolster plate on table: 280 x 280 mm Through hole in table: Ø 100 mm Ram speed, forward: 0.08 m/s Ram speed, return: 0.32 m/s Ram pin hole: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Approx. machine weight: 0.5 t Approx. machine dimensions (LxWxH): 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test performed up to 2.3 t. Good condition.

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressing force: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance between table and ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Nkjdpfjw D Awmox Abbot Pass-through openings in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor level: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m

Stanje: rabljeno, Technical details: Pressing force: 25 t Column width: 360 mm Stroke: 500 mm Installation height, table/ram top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke modes TÜV inspection valid until 05/2024 As is. * Nkedou U D I Rjpfx Abbst

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Nkodpfevc Awxox Abbet Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressure: 40 t Installation height: Table/Ram Top: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions approx. LxWxH: 2.3 x 1.45 x 2.40 m The press features a welded frame designed according to static calculations. (Manufacturer's specifications) The hydraulic unit consists of a three-stage pump system (high-pressure pump, low-pressure pump, and control pump). Additional technical data: - Ram plate size W: 900 x D: 500 mm Nkodju Nfp Ispfx Abbst - Ram bore Ø 40 x 75 mm - Hydraulics: tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min - Overrun travel 7 mm - Overrun time 58 ms - Single stroke and automatic cycle - Light barrier (can be repaired optionally) Two-hand operation and/or control panel *

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Nkjdpfxou Nfudj Abbjt Pressure: 10 t Throat depth: 255 mm Ram stroke - max.: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height: table/ram, top: 630 mm Installation height: table/ram, bottom: 230 mm Table clamping area: 420 x 400 mm Passage opening in table: 220 mm Ram clamping area: 200 x 200 x 65 mm Total connected load: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 1.1 x 0.5 x 2.1 m

Stanje: rabljeno, Technical Details: Nodpfx Aovc Ax Nebbokt Pressing force: 100 t Installation height: Table/Ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 200 mm/s Ram return speed: 200 mm/s Table size: 750 x 560 x 90 mm Passage in table: Ø 26 mm Ram mounting surface (W x D): 530 x 400 mm Pin hole in ram: Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Stanje: rabljeno, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid approach speed: 32 mm/s Working speed: 6.3 mm/s Rapid return speed: 42 mm/s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control system, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation: Optionally available with HORST robot. Nodowyplcopfx Abbekt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 250 t, Maksimalna sila stiskanja 250 ton. Delovni tlak 20 MPa. Zgornja miza 700 x 450 mm. Spodnja miza 900 x 630 mm. Svetla višina 800 mm. Hod cilindra 500 mm. Nodpfsx N Iraex Abbokt Hitrost spuščanja 110 mm/s. Hitrost dviga 200 mm/s. Potrebna moč 20,5 kW. Teža 8000 kg.

Stanje: rabljeno, Leto izdelave: 1996, Technical details: Pressing force: 6.3 t Nkjdpstxdmwofx Abbet Throat depth: 170/180 mm Stroke: 310 mm Drive power: 3 kW Installation height: 775 mm Approx. machine weight: 1.5 t Clamping table: 470 x 330 mm Table height above floor: 800 mm C-frame design 1 station

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 2.5 t Nkjdpfxerdlgie Abbst

Leto izdelave: 1991, Stanje: rabljeno, Pressure: 100 t Throat depth: 380 mm Stroke: 300 mm Table area: 1700x700 mm Ram area: 1400x700 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight approx. 10 t Space requirements approx. 2400x3600x3400 mm Pressure- and stroke-dependent shut-off BWS for safety and cycle operation Fixed stop Pressure switch Rapid approach and working stroke Two-hand operation Nksdpfx Aelp U Ayobbst Approved for manual loading operations

Leto izdelave: 1991, Stanje: rabljeno, Pressure 40 t Throat depth 320 mm Stroke 250 mm Throat depth 320 mm Table area 1400x600 mm Ram area 1200x600 mm Installation height 650 mm Total power requirement 22 kW Machine weight approx. 8 t Space requirement approx. 3200x3300x3300 mm Nksdpfslp U Avex Abbot Pressure- and stroke-dependent shut-off BWS for protection and automatic operation Fixed stop Pressure switch Rapid traverse and working stroke Two-hand operation Approved for manual loading/unloading operations

Stanje: kot nova (razstavni stroj), The HPK 100 A is a high-performance hydraulic press from the renowned KNUTH A-series, leading its category among hydraulic presses. This C-frame design ensures high rigidity and withstands maximum pressing forces of up to 100 tonnes. Manufactured in Europe, these machines impress with precision and durability, featuring large ram plates and a flexible hydraulic system that enables variable stroke-time settings. Mobile operation ensures high safety standards and intuitive handling, while high-quality seals and surface finishes provide low wear and long-term reliability. Standard equipment includes, among other features, a two-hand control panel, manually adjustable pressure switch, and a Siemens PLC for optimal operation. This hydraulic press is ideal for deep drawing, forming, and punching applications, and tailored solutions are available upon request. For further information about the HPK 100 A, an exceptional hydraulic press, feel free to request a quotation. Nedpfxoq R Rk Do Abbokt

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Tlak: 250 t Izteg: 360 mm Razdalja miza/bate: 800 mm Maks. hod bata: 500 mm Hitrost povratka bata: 390 mm/s Hitrost napredovanja bata: 450 mm/s Hidravlični tlak: 280 bar Priključna moč: 43 kW Delovna hitrost: 11....50 mm/s Obratovalni tlak: 20 MPa Skupna potrebna moč: 20,5 kW Teža stroja pribl.: 17 t Mere stroja pribl. D x Š x V: 3,9 x 1,9 x 4,0 m Nkedoxna Uzspfx Abbjt

Stanje: rabljeno, Tehnični podatki: Pritisk: 40 t Razmik med stebri: - mm Hod: 500 mm Izmet: 360 mm Razdalja miza/bat: maks. 800 mm Vgradna višina: miza/bat zgoraj: 600 mm Hod bata: 500 mm Hitrost bata naprej: 0,100 m/s Hitrost bata nazaj: 0,450 m/s Velikost mize: 750 x 500 mm Prehod na mizi: 200 mm Vpenjalna površina bata: 360 x 450 x 72 mm Luknja za čep v batu: 40 x 75 mm Višina nad tlemi: 700 mm Skupna potrebna moč: 13 kW Nsdpew Smukofx Abbokt Približna masa stroja: 3,2 t Približne dimenzije stroja DxŠxV: 1,75 x 1,15 x 2,95 m

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Nedpfxjv Rwu Us Abbjkt Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: rabljeno, Pressure 10 t Stroke 400 mm Nkedpfx Abed R Szuobot Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirement approx. ... m - without clamping plate - only approved for operations with closed tooling

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 100 t Throat depth: 260 mm Stroke: 300 mm Table size: 500 x 500 mm Ram dimensions: 650 x 500 mm Installation height: 700 mm Oil capacity: 600 l Ejector in table: 40 t Retraction force: 13 t Total power requirement: 22 kW Machine weight: approx. 7 t Space requirement: approx. 2.07 x 2.48 x 3.3 m - Ejector built into the table, pressing force 40 t, stroke 100 mm - Sideways movable work area guarding with light curtain (BWS), equipped for intermittent operation - Cooling unit behind the machine: accumulation water tank (beige), air cooler (grey-blue), including complete piping and control systems, etc. Nsdpfx Absb U Hvasbekt - Press is safe for unrestricted manual loading operation - Last accident prevention inspection/approval: Nov. 2013 - Documentation available Demonstration under power not possible, sale as is, no known defects, press should also be recommissioned by qualified personnel due to the control system.