Hme Ag

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: Rotary Index Table/Spindles: Clamping Stations: 12 motor spindles Drive: Torque drive, water-cooled Position measuring system: direct Indexing time: 1.5 seconds Spindles: Water-cooled motor spindles C-Axes: 0.001°, hydraulic clamping Speed: 5,500 rpm Power: 11 kW Workholding: Chuck Base Modules: Technology: Positioning module, 3-axis X-axis: 50 mm Y-axis: 100 mm Z-axis: 100 mm Measuring systems: Direct measurement in all axes Coolant supply: Integrated Max workpiece size: 100 x 100 x 100 mm Station 1: Horizontal: Raw part feed (indexing belt + Stäubli robot) Vertical: Measuring raw part Station 2: Horizontal: 4-position turret, non-driven Vertical: Measuring clamping error (C-axis homing) Station 3: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 4: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 5: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 6: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 7: Horizontal: Not equipped Vertical: 6-position turret with WAN, 10,000 rpm Station 8: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 9: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 10: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 11: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 12: Horizontal: Loader/unloader with double swing gripper + discharge conveyor Equipment / Accessories: Chip management: Chip conveyor High-pressure unit: 50 bar Tool monitoring: ARTIS breakage control Raw material feed: Feed belt with robot Finished part discharge: Discharge belt with 3-way diverter Tedpfezvt Iksx Aqteb Oil mist separator: Electrostatic filter Fire extinguishing system: Kraft & Bauer Part marking: Laser Part cleaning: HESO cleaning system

Stanje: rabljeno, Leto izdelave: 2002, Riello, model VFX300–6/4–0/1-V, vertikalna strojna linija Vertiflex z vrtljivo mizo, 6 postaj, 5 večglavih obdelovalnih enot s 6 orodji na glavo, 1 delovna postaja, 2 nastavitvene postaje, hladilnik, transportni sistem za odrezke, sistem za upravljanje hladilne tekočine in orodja. Serijska številka: 27.151.000 (2002). Država izvora: Italija. Prosimo, upoštevajte: Ta serija se nahaja v Budimpešti, na Madžarskem. Na žalost na lokaciji ni na voljo naprav za nakladanje, zato bodo demontažo in nakladanje plačali kupci. Tsdpszvcgisfx Aqtsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, visokozmogljiva rotacijska strojna postaja, zasnovana posebej za serijsko proizvodnjo srednje velikih in velikih komponent. Zahvaljujoč krajšim proizvodnim časom, visoki natančnosti in zanesljivosti prispeva k večji učinkovitosti v sektorju strojne obdelave: omogoča do 15 različnih operacij obdelave, vključno s prečnimi ali čelnimi operacijami obdelave na obeh straneh. Tjdjznnpmjpfx Aqteb

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Fanuc, model krmilnika: 30i, Opis: Splošno: Leto izdelave: 2011 Krmiljenje: Fanuc 30i Maks. obremenitev mize: 100 kg Pomik X/Y/Z: 300/300/370 mm Postavitvena teža: pribl. 33.000 kg Obdelovalna postaja I (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja II (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno + 1 x horizontalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja III (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja IV (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno + 1 x horizontalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Nakladalna postaja: Število: 2 kosa (spredaj in zadaj) Tsdpfozfu Rfox Aqteb Oprema / dodatki: Merilni sistemi: neposredno na vseh oseh Odstranjevanje ostružkov: transportni trak za ostružke Hladilna sredstva: IKZ naprava, 30 bar Nadzor loma orodja: Artis, tip CTM V5 Sistem ničelne točke: Erowa Lovilec oljne megle: Reven

Stanje: pripravljen za uporabo (rabljen), A complete CNC rotary transfer manufacturing system by Winema, including interlinking, peripherals, and a washing system, is available. 1) Rotary transfer machining center Winema RV20 Flexmaster, stations: 6, machining positions: 12, max. material throughput: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, bores: 8.7mm/15mm/17mm/18mm, reaming operations: 9mm/15mm/18mm, cycle time: approx. 7s, output rate: approx. 500 parts/h, control: Siemens Sinumerik 840D. 2) Bar feeder magazine Winema, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Coolant filtration unit Knoll Turbofilter, dirty tank volume: 500l, clean tank volume: 150l, filtration fineness: 50μm. 4) Cooling unit Knoll, cooling capacity: 15kW, max. oil temperature: 30°C. 5) Oil mist extraction unit UAS, separation efficiency: 96%-98%. 6) Interlinked continuous flow washing unit with automatic parts transfer. 7) Hydraulic unit. 8) Conveyor units. 9) Fire suppression system. This is a complete and interlinked production line for NC control valve manufacturing. The production of additional components can likely be set up. Documentation available. On-site inspection possible. Todpfxjzbl N Ss Aqteb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Podjetje prodaja Ransburg NO-2-701A. Stroj je povsem nov. Ransburg No.2 elektrostatistična brizgalna pištola Elektrostatistična brizgalna pištola Ransburg No.2® omogoča izjemno fino atomizacijo in skoraj 100% učinkovitost prenosa barve. Sistem uporablja z zrakom gnani rotacijski zvonec za ustvarjanje visoko kakovostnega elektrostatističnega nanosa z minimalnim razprševanjem. Namenjena je profesionalni uporabi, še posebej za kompleksne kovinske dele, ograje, vrata, ograjne sisteme, žične izdelke, obnovo pisarniškega pohištva in druge industrijske lakirne naloge. Tehnične specifikacije Največja izhodna napetost: 90 kV Poraba zraka: max. 150 l/min Teža: 1,25 kg Tsdpfx Aqoy Tbtfotjb Dolžina: 500 mm Napajanje: 230 V / 50 Hz Zaščitni razred: IP54 V kompletu: Elektrostatistična ročna brizgalna pištola z 4” zvoncem 7,5 m visokovoltažni kabel 7,5 m cev za barvo 7,5 m zračna cev Visokonapetostna krmilna enota Filter/regulator zraka 10 l tlačna posoda Voziček s podvozjem

Stanje: rabljeno, Leto izdelave: 2002, Artikel: Rotacijski avtomat Proizvajalec: Pfiffner Tip: Hydromat HB-32/45 Letnik izdelave: 2002 Za dodatne informacije in slike nas kontaktirajte po e-pošti (at) ali Tsdoy N Agrjpfx Aqtjb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Na voljo je horizontalni CNC krožni transferni stroj Sinico za obdelavo cevi in palic. Zmogljivost: cca 2500 kosov/uro, največja rezalna kapaciteta: 81 mm, največja dolžina obdelovanca: 340 mm, največji premer cevi: 81 mm, največji premer palice: 40 mm, orodjna glava: HSK-63, teža stroja: cca 16.000 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Todpfjy Nm U Tjx Aqtsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Na voljo je horizontalni CNC krožni transferni stroj Sinico za obdelavo cevi in palic. Produktivnost: cca 2500 kosov/h, maksimalna zmogljivost rezanja: 110 mm, maksimalna dolžina obdelovanca: 350 mm, maksimalni premer cevi: 81 mm, maksimalni premer palice: 40 mm, vpenjanje orodja: HSK-63, teža stroja: cca 16.000 kg. Stroj ima neznano napako. Dokumentacija je na voljo. Možen je ogled na mestu. Todey Nm U Hopfx Aqteb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja hladilne tekočine: 1.800 l, Oprema: dokumentacija / priročnik, - 16 postaj za orodja - Leto izdelave: 2000 (samo 3 leta produktivne uporabe) - Vključuje podajalnik palic »IEMCA« (nosilnost 2 t) Tedpfx Aqey Nmb Hetjb - Vključuje sistem oljnega rezervoarja (vsebnost hladilne tekočine 1.400 l) - Vključuje transporter odrezkov (z odstranjevanjem blata) - Vključuje opremo za nastavljanje orodja - Največja nazivna moč 40 kW / 3 x 400 V - Hidravlične enote »BOSCH« - Operacijski sistem »SYNUMERIC 840« - Dokumentacija - Pod napetostjo, možno preizkusiti - V zelo dobrem stanju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-305, Hydromat HB32/16, double-stroke, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8x collet mounts and 8x two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2 m 1x cutoff unit VE 40/80 8x feed units VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Tsdpfx Asy Nkhdjqtjb Nordmann tool monitoring Collection details: The machine base body is approximately 4 meters long, 3 meters high, and about 2.5 meters wide. The weight is approximately 6 tons. Other components are detachable. The hall is very spacious, there is no overhead crane, and a forklift truck is required for disassembly. No forklift is available on site! The aisles are 3 meters wide, there is a large roller gate, and a truck can drive directly up to the gate or even through the gate into the hall.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61062, prehod palice: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Max. bar length: 3300 mm Max. bar diameter: 9.1 mm Controller model: Siemens S7-200 Drive for parting-off unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtration system (Knoll FKA 150) Scraper belt conveyor with coolant system High-pressure unit FKA / 250 Todsyx Ia Njpfx Aqtob Tubes with coolant connections Hydraulic power unit Central lubrication system Hydraulic diagram and accessories Pressure intensifier HC3 - 4.0 - B Deflector plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Chuck plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, part no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Complete spindle unit with timing belt drive Coolant supply Cover plates for empty stations Material stop (60 mm stroke) Parting-off unit extended by 35 mm Measuring system Z axis Spindle unit with hydraulic NC axis Device for flushing clamping jaws Interchangeable parts for material clamping Stops for hydraulic unit carrier Exchange parts for bar feeder magazine Tools Tool holders Auxiliary clamping with collet Further details about the machine can be found in the attached documents.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Na voljo je večpostajni transferni stroj Riello z vrtalnimi in rezalnimi enotami. Horizontalne delovne enote: 2x vrtalne enote, 2x enote za rezanje navojev, 1x kombinirana enota. Radialne delovne enote: 1x vrtalna enota, 1x enota za rezanje navojev, 1x kombinirana enota. Hod pinole: 100 mm, vreteno: SK40, tip rotacijske mize: TG 320, revolverske postaje: 5, premer vpenjalne glave: 200 mm, hodi čeljusti: 12 mm + 12 mm, razdalja med vpenjalnim nosilcem in sredino vpenjalne glave: 225 mm, skupna priključna moč: 23 kW. Dimenzije stroja X/Y/Z: pribl. 3700 mm / 3400 mm / 3050 mm, teža: pribl. 5800 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Tsdpfxeytgpws Aqtsb

Stanje: novo, Leto izdelave: 2024, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 20 mm, Hidravlične škarje za pločevino – stroj po naročilu (dobavni rok cca. 10–14 tednov) – vključuje nožno stikalo, zaslon na dotik, zadnji prostor z nadzorom s svetlobno zaveso, avtomatski/električni rezalni razmak, avtomatski/električni rezalni kot, hidravlični pritisni element, motorizirano zadnje vodilo do globine 1000 mm Tedpfeynatlex Aqtob - Slike so simbolične -

Stanje: novo, Leto izdelave: 2025, delovna širina: 3.000 mm, najv. debelina pločevine: 10 mm, Hidravlične škarje za pločevino – stroj po naročilu (dobavni rok cca. 10–14 tednov) – vključuje nožno stikalo, zaslon na dotik, zadnji prostor z varovanjem z varnostno svetlobno pregrado, avtomatska/električna regulacija reze, avtomatski/električni rezalni kot, hidravlični pritiskač, motorizirano zadnje vodilo do 1000 mm globine Tedpfsym Uv Eox Aqteb -Slike so simbolične-

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Fleksibilnost: Naše Rotaflex strojevi ističu se izuzetnom fleksibilnošću, nadmašujući konkurenciju. Ovi strojevi su višenamjenski i sposobni izvoditi razne operacije uključujući tokarenje, glodanje, narezivanje navoja i izradu utora. Svaka stanica djeluje neovisno, s do 5 osi, što osigurava učinkovitu i preciznu obradu. Napredne mogućnosti tokarenja: Rotaflex strojevi su dizajnirani za stvarne tokarske operacije i opremljeni su steznim glavama (žabicama) koje mogu istovremeno pozicionirati na B osi i tokariti pri brzinama do 6.500 okretaja u minuti. Demonstracijske videozapise pogledajte u nastavku: Tedpfsyg Nwdjx Aqtob Inovativne Plug-and-Run stezne glave: Naše Plug-and-Run stezne glave omogućuju brzu izmjenu steznih glava u svega nekoliko sekundi, što omogućuje glatke prijelaze između radnih zadataka. Ova tehnologija izdvaja tvrtku Technica u industriji rotacijskih transfernih strojeva. Zašto odabrati Technica Rotaflex strojeve: Technica strojevi nude nenadmašnu svestranost i preciznost, čineći ih idealnim za serijsku proizvodnju gdje se traži visoka kvaliteta i prilagodljivost opreme. Kombinirajući švicarsku inženjersku preciznost s multifunkcionalnošću, naši strojevi pružaju pouzdan i učinkovit rad.

Stanje: rabljeno, Rotacijski transferni stroj znamke Technica, model Stemoflex Tsdpfx Ajydcm Hjqteb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-287, TEHNIČNI PODATKI Postaja 1: Žaganje Postaja 2: Vrtanje Postaja 3V: Sveder Postaja 3H: Vrtanje Postaja 4: CNC Postaja 5: CNC Postaja 6V: Navojenje Postaja 6H: Vrtanje Postaja 7: Obrat Postaja 8: CNC prevrtavanje Postaja 9: CNC navoj Postaja 10: Sveder Postaja 11: Vrtanje Postaja 12: Brez enote Postaja 13: CNC Postaja 14: Rezkanje 45° Postaja 15: Vrtanje 45° Postaja 16: Vrtanje 45° PODROBNOSTI O STROJU Stanje: Razstavljen Tjdpfxex U Tgao Aqteb Datum skladiščenja: Od avgusta 2024 Priključna moč: 400 V, 40 kW OPREMA - Nalagalnik materiala - Knoll transporter za ostružke - Knoll vakuumski rotacijski filter VRF 500 - Stroj se prodaja brez črnega podesta

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8450-02-001, premer vrtljive mize: 4.000 mm, Oprema: transportni trak za ostružke, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Processing stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Todpfx Aqjxur Rustsb Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large diameter of 4,000 mm for comprehensive machining operations - 12 NC drilling units with 12-position clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system including filtration and coolant systems - Measuring system and automatic loading/unloading for fully automated operation

Stanje: dober (rabljeno), Leto izdelave: 2010, Vrtljiva miza WEISS Tip: TC 220T letnik 2010. Tsdpfx Aqoxr Dh Hjtjb

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Todpfxew H Rh So Aqtsb Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table Tsdpfx Aqow H I R Rjtjb • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing performance: 20 cycles/min, spindle stroke: 100 mm, drilling capacity steel/brass: 20 mm/30 mm, thread cutting capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Tjdpjw Hglmsfx Aqteb

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Tsdpfsw E Hpvsx Aqtjb Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Tjdpsw Emx Rsfx Aqteb