AMBT pelletkacheltilburg

Stanje: rabljeno, Prečna žaga 1,85 kW Premer vretena: 40 mm Dolžina vretena: 130 mm Lodpfxexmk D Dj Ah Djah Moč glavnega pogona: 4,4 kW Stroj za utore Festo ZA-101 ----- s prečno žago 1 vreteno za utore ZA dolžinska omejitev 1850 mm, LAS drsnik za omejitev Za prodajo po naročilu stranke v OBSTOJEČEM STANJU!

Stanje: rabljeno, Leto izdelave: 1996, Premer gredi: 30 mm Višina reza: 125 mm Horizontalni hod: 145 mm Motor: 2,2 kW (3 KM) Zgornji odvijalec: Dolžina držala orodja: 150 mm Premer držala orodja: 150 mm Bočni pomik: +/- 30 mm Vertikalni hod: 0-160 mm Moč motorja: 2,2 kW Spodnji odvijalec: Dolžina držala orodja: 150 mm Premer držala orodja: 150 mm Bočni pomik: +/- 30 mm Vertikalni hod: 0-160 mm Lasdpfx Asxg I Ugjh Deh Moč motorja: 2,2 kW Neodvisna ali sočasna vertikalna nastavitev odvijalcev Mobilni voziček iz sive litine Ročna stiskalnica Letvica z mehanskim ustavljalcem Sesalna šoba 3 x 150 mm + 1 x 80 mm (žaga)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tenoning machine - Saw unit * Saw blade diameter: 500 mm * Maximum cutting width: 200 mm * Motor: 2.2 kW Lsdpoxd A E Usfx Ah Doah - Upper horizontal milling head * Tool diameter: 200 mm * Maximum tenon length: 150 mm * Motor: 2.2 kW - Lower horizontal milling head * Tool diameter: 200 mm * Maximum tenon length: 150 mm * Motor: 2.2 kW - Spindle * Spindle diameter: 50 mm * Maximum tool diameter: 350 mm * Spindle length: 180 mm * Motor: 5.5 kW - Tilting table +/- 60° - Pneumatic hold-down - Fence/Stop rail max. 3000 mm - Reversible counter-profile - Swiveling fence +/- 45°

Stanje: rabljeno, Zapiralni in utorni avtomat WEINIG UNITEC 10 kot nosilec za rezervne dele iz UC-Matic linije za okna. - Leto izdelave: 1997 - Krmiljenje Sütron BT20 Lsdow I Db Hspfx Ah Doah - Stroj ni popoln - Podrobnosti na zahtevo.

Stanje: rabljeno, Leto izdelave: 1991, Used machine Year of manufacture: 1991 Designed for all window tool systems with up to 400 mm tool diameter Thanks to the standard brake systems (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be brought to a stop within just a few seconds. The protective covers for the slot spindle and cross-cut saw are designed to allow tools to be easily and conveniently changed without the need to remove the covers themselves. The cross-cut saw can be easily adjusted from the operator’s position using a quick-adjustment mechanism. A six-position turret enables rapid setup changes for different dimensions. The 40 mm slot spindle height can be precisely adjusted with a conveniently positioned handwheel, with 0.1 mm graduation. The robust roller table, combined with hardened and ground guideways, can be moved effortlessly with minimal force. Slot spindle motor: 5.5 kW Slot spindle speed: 3,000/4,500 rpm Ledjwwxzbepfx Ah Doah Spindle diameter: 40 mm Clamping length: 140 mm Slot spindle height adjustment: 100 mm Extraction port: 120 mm Cross-cut saw motor: 2.2 kW Saw speed: 2,950 rpm Saw blade bore: 30 mm Max. saw blade diameter: 400 mm Max. cutting height: 125 mm Pneumatic tool clamping With Festo-LAS stop Weight approx. 600 kg Availability: short notice Location: Flörsheim

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Laedpjwgwlkefx Ah Doh Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Used window milling machine, fully operational (still in use, can therefore be inspected), cross-cut saw, slot spindle, profile spindle (see photos). Machine available individually or with tooling (complete Leitz IV66 window set upgraded with sash rebate seal, with and without rain rail, IV 78 Aigner profile with and without rain rail). Laodpfx Ahewgnn Ae Djh

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Lasdpfx Ahsv Tb Hgj Doh Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2160 x 1080 x 1650 mm Weight: 1500 kg Total power requirement: 12 kW CNC Tenoning Machine FRAMEMAKER - Min. / max. workpiece width: 10 – 120 mm - Min. / max. workpiece thickness: 10 – 50 mm - Min. / max. tenon depth: 5 – 45 mm - Min. / max. drilling depth: 5 – 45 mm - Tool rotational speed: 9,000 – 12,000 rpm - Milling spindle motor: 5.5 kW - Spindle diameter: 30 mm - Tool dimensions (diameter): 130 x 90 mm - Tool holder: ER 25 - Min. / max. drill diameter: 4 – 16 mm - Drilling speed: 12,000 – 18,000 rpm - Drilling spindle motor: 3.7 kW - Servo motor X-axis: 1.0 kW - Servo motor Y-axis: 1.0 kW Lsdpfsvz Ha Uox Ah Deah - Servo motor Z-axis: 0.75 kW - Total power: 12 kW - Driven by ball screw - Linear guideways - Machine frame made of solid cast iron - Operating pressure: 6 bar - Extraction port: 2 x 100 mm - Dimensions: L=2160, W=1080, H=1650 mm - Weight: 1500 kg

Stanje: rabljeno, used, good condition Brand: Magic Model: MTP 27 Lodpfx Aevwf S Ush Doah Positioning control Number of spindles: 1 unit Spindle diameter: 50 mm Clamping height: approx. 270 mm Cut-off saw Speeds: 3500 rpm

Stanje: rabljeno, Leto izdelave: 1984, incl. various slot and tenon discs used Manufacturer: Löwer Model: ZA 3000 Year of manufacture: 1984 Machine number: 5485 Motor: 1.5 kW Motorized brakes Number of spindles: 2 x vertical saw, 1 x horizontal milling spindle Clamping height: 200 mm Diameter: 40 mm Cross-cut saw Table size: 800 mm x 350 mm Swiveling fence Stop ruler: 2000 mm, Festo LAS fence system Manual workpiece clamping Extraction connection: 120 mm Space requirement: approx. 1700 mm x 1700 mm x 1600 mm Location: 97447 Gerolzhofen, free on truck, unpacked Delivery in as-is condition, as inspected, Lasdpsvwf I Aefx Ah Dsh without overhaul, without warranty or guarantee

Stanje: rabljeno, used, excellent condition, low operating hours cleaned, function-tested, trial run performed service unit and switch housing replaced pneumatic system completely resealed includes adjustable mini finger-joint cutter 60 to approx. 95 mm Make: Hirsch Model: LQP 180 Year of manufacture: approx. 1992 For cross machining of mini finger joints and counter profiles swiveling adjustment to +70/-70 degrees length measurement at stop timber clamping with 8 bar bridge manual feed of the sawing and milling carriage safety circuit electric brake system maximum wood thickness: 80 mm minimum wood thickness: 10 mm maximum profile depth: 50 mm Sawing unit: - Three-phase motor 2.2 kW - spindle speed 2,800 rpm Laedpjvwfvgofx Ah Deh - horizontal adjustment 50 mm Milling unit: - Three-phase motor 4 kW - spindle speed 6,000 rpm - usable spindle length 100 mm - spindle diameter 40 mm - tool diameter 180 mm - weight: 850 kg - dimensions: approx. 1700 x 1450 mm Special accessories: - digital angle display, completely replaced, original Elgo - angle display resolution 1/10 degree Original price approx. €20,000 Location: 97447 Gerolzhofen Delivery as-is, as inspected, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Motor: 7.5 kW / 2 kW / 0.37 kW Saw blade: 450 mm diameter, 30 mm bore Spindle height: 42 cm Horizontal cutting width of the saw: 15 cm Electric feed Table width: 32 cm Ljdpfx Ahjurt Hfo Deah Pneumatic pressure

Stanje: dober (rabljeno), Leto izdelave: 1992, Mini finger jointing milling machine Hirsch Type: LQP 180 used For sawing For mini finger joints For tenoning For slotting Wood thickness min/max: 50/80 mm Angle adjustment range: +70/-70 degrees For cross-machining mini finger joints and counter profiles. Conversion to +70/-70 degree bevel Length stop, Wood clamping with bridge, 8 bar Manual feed of the saw and milling carriage, Safety circuit, electric braking system Maximum wood thickness: 80 mm Minimum wood thickness: 10 mm Maximum profile depth: 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm Horizontal adjustment 50 mm Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm Usable spindle length 100 mm Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Lasdpfxjumk Dkj Ah Djh Dimensions: 1600 x 1450 mm

Stanje: zelo dobro (rabljeno), Catalogue number 7382 TECHNICAL DATA Tenoning carriage: - Electrically driven carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Crosscut fence on carriage – cutting length with telescopic extension: 1860 mm - Swivel stop block on fence - 2 pneumatic clamps Crosscut saw: - Max. blade diameter: 380 mm - Max. cutting height: 110 mm - Saw blade adjustable up/down, forward/backward and at an angle - Blade guard - Saw motor: 2.2 kW Tenon spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke via handwheels - Max. tool diameter: 320 mm - Spindle diameter: 40 mm - Working spindle height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke via handwheels - Max. tool diameter: 200 mm - Working spindle height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Support bracket extendable from table - Motor: 7.5 kW Glazing bead saw: - Max. blade diameter: 200 mm - Blade bore: 30 mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min Lasdpfx Ahjtx T Dxj Deh - Extraction nozzle diameters: 60 mm, 2x130 mm, 110 mm, 100 mm - Working pressure: 6–8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenon spindle – Unpainted, used machine, very good condition Net price: 27,900 PLN Net price: 6,570 EUR (calculated at 4.25 EUR exchange rate) (Prices may vary with larger fluctuations)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tenoning machine for window production SAC F4 Technical condition: good, fully operational machine. A large set of spare parts is included in the price of the machine. Technical specifications: - Min. workpiece height: 30 mm - Max. workpiece height: 90 mm (105-130 mm) - Min. workpiece width: 30 mm - Max. workpiece width: 600 mm - Min. workpiece length: 200 mm (measured inside the tenons) - Max. workpiece length: 3000 mm - Max. tenoning depth: 130 mm - Max. trimming width: 1000 mm - Wave length: 320 mm - Spindle diameter: 50 mm - Vertical stroke: 290 mm - Tool zero diameter: 300-350 mm Stumpfstoßsäge (cross-cut saw) - Horizontal stroke: 130 mm - Continuous axis positioning - Tool diameter: 400 mm - Spindle speed: 3,000 rpm - Motor power: 3.2 kW Zapfenschneidwelle (tenon cutting spindle) - Motor power: 5.5 kW (7.5 or 9.25 kW) - Spindle speed: 3,500 rpm Profile cutting: - Min. workpiece height without left guide: 20 mm - Max. workpiece height: 140 mm - Min. workpiece width: 45 mm Lsdpfjrzvkcsx Ah Djah - Min. workpiece length: 200 mm (measured inside the tenons) - Wave length: 320 mm - Spindle diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Tool diameter in zero position: 110-140 mm Max. tool diameter: 240 mm First profile cutting spindle: - Motor power: 5.5 kW (7.5 or 9.25 kW) - Spindle speed (right and left): 6,000 rpm Second profile cutting spindle: - Motor power: 5.5 kW (7.5 or 9.25 kW) - Spindle speed: 6,000 rpm Tenon cutting carriage: - Worktable dimensions: 750 x 900 mm - Motor power: 1.1 kW - Working speed: 3-10 m/min - Positioning speed: 45 m/min - Number of anti-splinter cover positions: 4-8 - Continuous axis positioning of fence up to 3000 mm - Angle fence ± 60° Saw for glazing bead unit: - Motor power: 2.2 kW - Saw blade diameter: 200 mm - Spindle speed: 6,000 rpm Profile milling feed unit: - Motor power: 0.75 kW - Feed speed (from ... to ...): 4-20 m/min - Number of rollers: 16 - Roller diameter: 145 mm Grooving cutter for hardware (on request): - Motor power: 3.3 kW (5.5 kW) - Max. tool diameter: 190 mm - Spindle diameter: 30 mm - Spindle speed: 6,000 rpm - Horizontal movement: 70 mm - Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4,300 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, I am selling a combined tenoning machine with boring head BALESTRINI I2F. Lsdpfx Aehw Dfnjh Djah - One tiltable table with pneumatic material clamp. - Automatic bottom-up cut-off saw. - Milling head for tenon or finger joint production. - Boring head for dowel drilling, 3-spindle, rotatable 360°, any position possible. - Automatic feed. End-position sensors for positioning. - Immediately available.

Stanje: rabljeno, Slotted discs, window milling tool, interchangeable insert window construction tool, wood milling tool, wood cutters - Slotted discs, milling tool for wooden windows, wood cutters, milling head, milling tool, wood cutter, profile cutter - Manufacturer: VIVALDI, window milling tool - Outer cutter diameter: Ø 195 mm - Height: 100 mm - Bore: Ø 40 mm - Weight: 9.1 kg Ledog Uxguopfx Ah Djah

Stanje: rabljeno, Slotting discs, window milling tool, reversible plate window construction tool, wood milling tool, wood cutters - Slotting discs, milling tool for wooden windows, wood cutter, milling head, milling tool, wood router, profile cutter - Manufacturer: VIVALDI, window milling tool Laedpfjg Uxgisx Ah Dsh - Outer cutter diameter: Ø 185 mm - Height: 75 mm - Bore: Ø 40 mm - Speed: up to max. 6,000 rpm - Weight: 5.8 kg

Stanje: rabljeno, Slotting cutters, window milling tool, indexable insert window manufacturing tool, woodworking cutter, wood milling cutter - Slotting discs, milling tool for wooden windows, wood cutters, milling head, milling tool, wood milling cutter, profile cutter - Manufacturer: VIVALDI, window milling tool - Outer cutter diameter: Ø 190 mm - Height: 90 mm - Bore: Ø 40 mm - Speed: up to max. 6,000 rpm Ljdpfx Aeg Uxgfoh Djah - Weight: 9.9 kg

Stanje: rabljeno, Slitting discs, window milling tool, indexable insert window construction tool, woodworking tool, wood milling cutter - Slitting discs, milling tool for wooden windows, wood milling cutter, cutter head, milling tool, wood milling cutter, profile milling cutter - Manufacturer: VIVALDI, window milling tool Ledpeg Uxgbefx Ah Dsah - Outer cutter diameter: Ø 172 mm - Height: 100 mm - Bore: Ø 40 mm - Speed: up to max. 6000 rpm - Weight: 8.2 kg

Stanje: rabljeno, Slotting cutters, window milling tool, reversible insert window construction tool, wood milling tool, wood milling cutter -Slotting cutters, milling tool for wooden windows, wood cutter, milling head, milling tool, wood cutter, profile cutter Ledpfx Ahjg Uxf Ne Deah -Manufacturer: VIVALDI, window milling tool -Outer cutter diameter: Ø 207 mm -Height: 75 mm -Bore diameter: Ø 40 mm -Speed: up to max. 6,000 rpm -Weight: 8.2 kg

Stanje: rabljeno, tenoning and mortising machine, tenon cutter, tenon slotter, mortise rotor, tenon and mortise machine, mortising and tenoning milling machine - Manufacturer: Festo, tenon and mortise machine Lodsf D H E Nopfx Ah Djah - Model: ZA 101/S - Technical data: see type plates/photos - Dimensions: 1675/1545/H1330 mm - Weight: 546 kg

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the Weinig Unitec 10 mortising and tenoning machine for window production. Year of manufacture: 1998. Equipped with OERTLI cutter heads. Immediately available. Unit price: €8,500. Three units available. Condition: very good! Laedpsfzzhkofx Ah Deh

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 5503 TEHNIČNI PODATKI - motor 2,2 kW - napajanje 380 V - dimenzije d/š/v 1870x1050x1220 mm - teža 846 kg Stroj je opremljen z: - 2 mizami s kotnimi profili, dimenzije 380x330 mm - pnevmatski pritiski - mize nastavljive pod kotom v dveh ravninah - na mizah možnost izdelave vzdolžnih in okroglih čepov - mize nastavljive gor/dol - nastavitev širine čepa - centralno mazanje - nebarvan - italijanska proizvodnja - dve delovni mesti Lasdpfed Snfgex Ah Dsh - pnevmatski - robusten stroj Neto cena: 18.900 PLN Neto cena: 4.450 EUR Neto cena izračunana po tečaju 4,25 PLN/EUR (v primeru večjih nihanj tečaja se cena lahko spremeni)