Robikum d.o.o.

Leto izdelave: 2026, obratovalne ure: 1.000 h, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina varilnega noža: 500 mm, dolžina nosilne roke: 350 mm, varilna moč (maks.): 2 kVA, širina varilnega noža: 10 mm, številka stroja/vozila: 1266.11.99, Oprema: CE označba, Varilni stroj za visokofrekvenčno varjenje, model P.TE 1-350, leto izdelave 2006, leto zadnjega pregleda 2026, opremljen z varnostnimi sistemi in oznako CE. Linearna varilna elektroda, 500x10 mm, primerna tudi za uporabo z manjšimi oblikovanimi kalupi za ventile ali zapirala. Dimenzije: 520x900xV650 mm Dksdpfx Apjz Ilxijweu Popolnoma delujoč, v celoti pregledan.

Leto izdelave: 2013, stanje: dober (rabljeno), Branson M-5i2HRi (2013) Dkodpfx Apez E R Rfswsu

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, STROJ ZA PROIZVOJNJO VALOVITEGA EMBALAŽNEGA MATERIALA AMUTEC TSA ROLLER 1380 Najmanjša/največja širina materiala: 300/1360 mm Najmanjša dolžina embalaže: 50 mm Najmanjša/največja debelina: 2 × 10 / 4 × 75 μm Najmanjša/največja širina končnih zvitkov: 100/420 mm Največji premer končnih zvitkov: 120 mm Dkjdpfx Apjzzd S Rjweu Upogljalni trikotniki Transportni trak Fotočlen za natisnjene materiale Upravljalna plošča z zaslonom na dotik Označevalnik Leto proizvodnje: 2017

Leto izdelave: 2015, stanje: rabljeno, Vhodna moč 12,5 KVA Faktor moči 0,95 Dedpfxezq Hkne Apweku Nazivna moč 10 kW Izhodni tok 560 A eff Izhodna napetost 1500 V eff Po naši oceni je stroj v skoraj novem stanju in si ga je mogoče po dogovoru pod napetostjo ogledati. - Vključno z različnimi dodatki Pribor, prikazana orodja in vpenjalne naprave so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah ter vmesne prodaje!

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Ponujamo pnevmatsko ultrazvočno varilno napravo Swiss-Sonic. 1) Ultrazvočna varilna stiskalnica Swiss-Sonic UWP 20-1, leto izdelave 2014, maks. sila stiskanja: 3000 N, min./maks. varilni hod: 0 mm/100 mm, razdalja med stiskalnicama: 220 mm, nastavitev višine: 300 mm, maks. delovni tlak: 6 bar, premer cilindra: 80 mm, priključek za stisnjeni zrak: 8 mm, delovno območje: 220 mm–520 mm, površina za postavitev X/Y: pribl. 650 mm/450 mm, dimenzije stroja X/Y/Z: pribl. 430 mm/600 mm/1530 mm, teža: pribl. 150 kg. 2) Ultrazvočni generator Swiss-Sonic. Vključno s periferno opremo. Slike se ne ujemajo s strojem, ki je na voljo za prodajo. Dokumentacija je na voljo. Ogled možen po dogovoru. Dkedpfx Aezlt Rwopwsu

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Omega 130 – stroj za zlaganje in lepljenje – za 4- in 6-kotne škatle Dodpfxszlqwzj Apwjku - ALLPRO 130 (model 2016) - Kamera na podajalniku za nadzor vnosa v odsek za izpis - Podajalnik z vakuumom - Podajalnik s servo motorjem - Levi in desni odsek za natančno pozicioniranje - Daljinski upravljalnik - Motorizirani transportni trakovi - Motorizirani zgornji nosilci za težke materiale - Elektronski servo sistem za 4- in 6-kotne škatle - Pnevmatski sistem za usklajevanje za škatle z mikrovalovitimi stranicami in samolepilnim dnom - eWON Flexy za izmenjavo podatkov prek protokola OPC UA - Varnostni kabli za izklop - Sistem za nanašanje vročega lepila LAMBERTONI (2 aplikatorja) + stranski disk s posodo za hladno lepilo - Možnost namestitve sistema za nanašanje hladnega lepila ZATOR (4 aplikatorja) brez črpalke in enkoderja

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Na voljo je visokofrekvenčni varilni stroj s premikajočo mizno ploščo Schirmacher. Dimenzije mize X/Y: 750 mm/550 mm, maksimalna tlačna sila: 20 kN, moč generatorja: 10 kW, delovna frekvenca: 27,12 MHz, upravljanje: Siemens. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dedpezh Niusfx Apwjku

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 579-130-09, With 1S1C print Meca Tecno srl. Italy Possible to test the machine. Dkjdpfx Aszfgigopweu Very good condition. Regularly maintained. Please contact us for further information.

Leto izdelave: 2007, stanje: rabljeno, Dimenzije D x Š x V: 1.900 x 2.131 x 3.023 mm Teža stroja približno 2.200 kg Po naši oceni je stroj za varjenje s grelnimi elementi v dobrem rabljenem stanju. Tehnične značilnosti: Stisnjen zrak: - Najvišji delovni tlak: 6 bar - Poraba stisnjenega zraka: 0,2 Nm³/cikel pri 5 bar Grelnik: Dkjdpozbvnxjfx Apweu - 2 x 12 grelnih patron WALTOW, Ø12,5 x 400 mm, 1000 W, 230 V - 2 x termoelement tip PT100 - Čas segrevanja na 350°: cca 50 minut Vakuumska črpalka: - Vakuumska črpalka BECKER, tip VT 4.16, 550 W Pribor, prikazana orodja in vpenjala so priložena le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: zelo dobro (rabljeno), For sale: professional ultrasonic welding machine KLN Ultraschall / MECASONIC OMEGA 3 MCA – industrial equipment for precise joining of plastics. Designed for use in: - Series production - Automotive industry - Electronics and medical sectors - Welding of plastic elements (e.g. housings, blisters) ⚙️ Specification: Manufacturer: KLN Ultraschall (Crest Group) / MECASONIC Model: OMEGA 3 MCA Type: ultrasonic welding system Tool manufacturing year: 2011 Control: MCA digital panel Cycle counter: approx. 23,000 Two-hand safety activation system (operator safety) Industrial power supply 📦 Included: - Complete welding unit - MECASONIC MCA controller - Work table with tooling (mold / holder – "Blister") - Pneumatic installation (visible in photos) - Cabling 📊 Condition: - Used device - Visually in very good condition - Normal signs of wear (see photos) - Machine powers on – panel operational - Full production testing not completed 📄 Additional information: - Cycle counter visible on display - Safety instructions (DE) on the housing - Robust industrial construction ✅ Advantages: - High welding precision - Fast process (ultrasonics) - Reliable industrial technology - Ready for integration or standalone use Dkedjyzui Ajpfx Apweu - Renowned manufacturers (KLN / MECASONIC) 🚚 Shipping: - Palletized shipping - Personal collection possible - International shipping possible

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Enosmerni tok, vhodna napetost: 400 V, skupna višina: 2.890 mm, skupna širina: 2.440 mm, skupna dolžina: 2.890 mm, Mobile welding station, 10ft, for PE/PP pipes incl. HÜRNER CNC 500 (SST series) Industrial-grade butt fusion welding, independent of weather conditions Dksdpfx Ajyzn Ifspwju Stop assembling makeshift welding tents on your construction site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell designed for demanding PE/PP pipeline construction projects. Plastic welds are sensitive to drafts and moisture—this container ensures stable, compliant ambient conditions and seamless documentation. Your advantages in pipe handling: The bottleneck on-site is material handling. This station is uncompromisingly engineered for ergonomics. Pipe sections are fed straight through the container via the 800x800 mm front-end pipe hatches (with integrated brush strips). The built-in 1,000 kg lift table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-man operation. Plug & play: simply connect to power and start welding. Technical data (SST 10 / 500): - Container: 10' High Cube, double door, one way (incl. checker plate steel floor) - Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management - Working range: OD 200 to OD 450 mm (reducing inserts included) - Lifting equipment: Electric lift table (1,000 kg), electric chain hoist with trolley/manual travel gear (3m lift) - Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe hatches (800x800 mm) - Power distribution: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), FI 63A - Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fixtures - Condition: Fully welding-ready (CE), incl. DGUV inspection & 2x heavy-duty coating (customer color on request) - (Note: Delivered without power generator) Available versions of this series: This listing refers to the SST 10 / 500 version. We manufacture these stations in four standardized performance classes to match your project requirements: - SST 10 / 355: 10-foot container, for pipes up to OD 355 mm - SST 10 / 500: 10-foot container, for pipes up to OD 450 mm (offered model) - SST 20 / 355: 20-foot container (extended workspace), for pipes up to OD 355 mm - SST 20 / 500: 20-foot container (extended workspace), for pipes up to OD 450 mm Custom configurations are available on request. Please contact us for a detailed offer.

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Dkodpfx Asyqr Sxopweu

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ultrazvočni varilni stroj BRANSON Mod. 8.200 Dodpfx Apjylpqbswsku

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), delovna širina: 620 mm, številka stroja/vozila: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive system is hydraulic, supported by positioning and control systems. The machine features its own vacuum pump. Low operating hours (approx. 6,800 h). Usable heating element area: width 600 mm x depth 400 mm Dkodjykvdljpfx Apwou Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. upper part height: 350 mm - Max. lower part height: 350 mm (Combinations of part heights are possible, depending on contour.) - Max. operating temperature for contact process: 400°C The machine’s modular frame allows for easy retrofitting. Side and front doors in the welding area can be easily opened for simple retooling. The automatic safety lift door offers a high level of operator safety. Temperature controllers on the control panel display both actual and set values. The operating panel is a Siemens PLC control unit. Machine control is managed via Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety shutoffs in case of overtemperature. Pin systems in the tool clamping surfaces enable reproducible positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses - Low rejection rates due to precise and reproducible weld joints - Sensitive parts can be welded thanks to precise time, temperature, and force control - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility must be verified) Technical specifications: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 wires, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with safety door fully raised: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Leto izdelave: 2023, stanje: rabljeno, Ponujamo rabljeno ultrazvočno varilno postajo Weber Ultrasonics Saphir Digital Manual Station, letnik 2023. S to napravo je bilo izdelanih približno 92.500 enot. Sonotroda TR35Ti Frekvenca: 35kHz Moč: 1000W 230V AC Dksdpeyimqwofx Apweu Sistem za merjenje hoda: 26,88 mm Minimalna sila: 34 N Maksimalna sila: 500 N Nizka vrednost: 0 N Nizek odmik: 0 N Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, High-Frequency Generator Schirmacher HS25.000 The HF generator is used to generate a high-frequency electromagnetic field, enabling the connected HF production equipment to: - Heat and weld thermoplastic plastics, - Dry paper, textiles, wood, and similar materials, or - Heat plastic granulates, rubber, and more. Technical Data Operating frequency: 27.12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, connected load 46 kVA Control system: Generator: Siemens S7 PLC / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9.1 kV, no load 10.4 kV Anode current: Full load 3,800 mA, no load 800 mA Dkjdpfxox U Trps Apweu Dimensions (WxDxH): 1,200 x 1,200 x 2,000 mm Commercial Information Condition: Brand new machine, ex delivery warehouse – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: In stock, more than one unit available Warranty: On request Generator Highlights Quick commissioning due to modular design – flexible integration into various production processes and compatibility with different tools. High-precision control – exact power output and consistently high welding results. Ultra-dynamic HF regulation prevents flashovers during the welding process extremely quickly. Electrode protection – integrated in the generator to safeguard machine and tooling. Automation-ready – suitable for use in automated manufacturing processes, with capability for integration into existing systems. Inspection possible by appointment.

Stanje: kot nova (razstavni stroj), PFAFF 8320 - 111/101 dolgo-ročna izvedba s mizo Dodpfxsxa D Hre Apwoku

Stanje: rabljeno, Leto izdelave: 2013, Hermann Ultrasonic Cutting & Sealing System Hermann MPW BT1200 35 kHz 1200 W Year of manufacture: 2013 Price: €9,900 Dkedpfxewv T H Aj Apwsu Contact person: Mr. Rainer Eckerle

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Ultrasonic Welding System Manufacturer: KLN Stock number: Year of manufacture: 2013 and 2009 respectively Model: PXO, serial number P600031440 MXO, serial number M60413293 Features: The system consists of two stations. Single station sale possible. Price: EUR 5,000 per station Price incl. 19% VAT: EUR 5,950 per station Dkjdpfsvxppaex Apwou

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Mecasonic MCS2 CAB Ultrasonic Welding System - Very good condition Dksdpfx Asvvw Ekjpwju - Year of manufacture: 2015 - 3 units available - CE Declaration of Conformity provided - Terms: Incoterms EXW CH-4528 Zuchwil - Loading facilities available

Leto izdelave: 2010, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Branson ultrazvučni zavarivač koristi se za spajanje plastičnih dijelova bez upotrebe dodatnog materijala za spajanje. Frekvencija 20 kHz, snaga 1000–2000 W, napon 230 V AC, hod 100 mm. Dimenzije (D x Š x V): 400 x 500 x 1200 mm. Djdpfxsvt Sc Ej Apweku

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) from Hürner are available. Years of manufacture: 2x 2016 and 1x 2018. Working range OD: 40 mm - 160 mm. Power: 2.85 kW. Reduction inserts: 40/50/63/75/90/110/125/140 mm. Weight: approx. 80 kg. Documentation is available. An on-site inspection is possible. Dodpfx Apeviv Azowsku

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Welding force: 2500 N, table dimensions: 420 x 415 mm, height adjustment: 250 mm, stroke: 100 mm, control: Telsonic MPS-4, connected load: 4000 W, length: 459 mm, width: 854 mm, height: 1315 mm, weight: 130 kg. Equipped with SICK C4000 safety light curtains, enclosure, and documentation. On-site inspection possible. Dkjdpfjuy T I Hsx Apwju

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), An ultrasonic welding system is available comprising two Telsonic TSP-3000-1P units, enclosure, generators, and documentation. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. An on-site inspection is possible. Djdpfouy T Ndjx Apwoku

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), An ultrasonic welding system with nine Telsonic ultrasonic units, an enclosure, nine generators, and documentation is available. Control system: Siemens SIMATIC PANEL. An on-site inspection is possible. Dedjuy T Nqopfx Apweku