Ostale stroji za obdelavo pločevine nakup rabljenega (271)

Leto izdelave: 1970, Stanje: pripravljen za uporabo (rabljen), Working width: 3050 mm, material thickness: 6 mm, throat depth: 200 mm, backgauge adjustment: 1000 mm, drive power: 15 kW, cutting angle range: 1°–2°, table height: 900 mm. Machine dimensions (L/W/H): approx. 4100 mm / 2300 mm / 2100 mm, weight: approx. 8500 kg. An on-site inspection is possible. Itodpfx Ahsvr Efdo Don

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop on the machine is faulty. An on-site inspection is possible. Itjdouxdifjpfx Ah Den

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), Working width: 3040 mm, max. sheet thickness: 16 mm, frame gap: 3040 mm, throat depth: 200 mm, backgauge width: 1000 mm, motor power: 45 kW, strokes per minute: 22. Documentation available. On-site inspection possible. Ijdpfx Ahjvf Ix Tj Dstn

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Two similar-type Stanley rivet presses are available. Both machines come complete with ERF 23 and 23.1 rivet feeders. An on-site inspection is possible. Isdpfx Ahown Iabj Detn

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), A hydraulically operated guillotine shear from EHT, overhauled in 2023, is available. Cutting length: 3000 mm; maximum sheet thickness (steel/stainless steel): 4 mm / 2 mm; back gauge range: 10 mm – 1000 mm; adjustment speed: 180 mm/s; strokes: 18-31 strokes/min; oil volume: 160 L. Machine dimensions (L/W/H): approx. 3700 mm / 2100 mm / 2150 mm; weight: approx. 4800 kg; operating hours: 44,024 h. Cylinders, blades, and hoses were serviced in 2023. On-site inspection is possible. Isdpjwrhwujfx Ah Dotn

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Working width: 4110 mm, max. sheet thickness: 6 mm, stroke: 131 mm, strokes per minute: 12, maximum pressing force: 150 bar, oil tank capacity: 250 l, control system: ELGO Electric, motor power: 18.5 kW, length: 4750 mm, width: 2350 mm, height: 1950 mm, weight: 12 t. An on-site inspection is possible. Itodpjwb E Szjfx Ah Don

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A sheet metal stack turner for metal sheets is available. Max. sheet dimensions X/Y: 1600mm/1100mm, max. sheet stack height: 190mm, max. stack weight: 1500kg, max. stack tilt angle: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation is available. An on-site inspection is possible. Itedpfev I Dcgjx Ah Djn

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), An Amada CNC turret punching machine and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, punching force: 300kN, X/Y travel: 2500mm/1525mm, X/Y travel with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Travel speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Number of turret stations: 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21,000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm–6mm, max. sheet weight per pallet: 3000kg, suction cups: 34. Machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. An on-site inspection is possible. Itodpfsv Rp Tcjx Ah Dsn

Stanje: pripravljen za uporabo (rabljen), A complete punching line with a grid punching press is available. 1) Decoiler Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000 kg. 2) Straightening machine, max. material width: 300 mm, max. material thickness: 2 mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5 m/min, max. material width: 300 mm, max. material thickness: 4 mm, transport rollers: 2. 4) Grid punching press HR 50/600 NL, strokes per minute: 300, stroke: 30 mm – 80 mm. An on-site inspection is possible. Iodew Az R Aepfx Ah Djtn

Stanje: pripravljen za uporabo (rabljen), Max. coil weight: 25 t, max. coil outside diameter: 2,500 mm, coil inside diameter: 506–610 mm, finished sheet width: 50–159 mm, strip thickness: 0.6–3 mm, equipped with double-cone decoiler, threading unit, straightening machine (straightener was taken from an earlier line, manufacturer Schnutz, year of construction: late 1980s to early 1990s), loop bridge, strip feeder, cross-cut shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and portal gripper with two stacking stations. An on-site inspection is possible. Itodpfx Ahjrk Rxfs Den

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A Lissmac steel brushing and deburring machine is available. Pass-through width: 1500 mm, max. sheet thickness: 20 mm, medium: brush block, machine dimensions (L/W/H): approx. 3100 mm / 1400 mm / 1800 mm, weight: approx. 2300 kg. Documentation available. On-site inspection possible. Iedpfx Ahjwi Tnts Djtn

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), A Darley CNC press brake is available. Pressing force: 2000 kN, working width: 5200 mm, power: 15 kW, oil capacity: 160 l, machine dimensions (L/W/H): approx. 5500 mm / 1900 mm / 3100 mm, weight: approx. 20,000 kg. Includes tooling and accessories. Documentation available. An on-site inspection is possible. Isdpfxovf Ixys Ah Detn

Stanje: pripravljen za uporabo (rabljen), A Finn-Power CNC punching press is available. Press force: 300 kN, max. workpiece width: 4061 mm, max. workpiece length: 1528 mm, max. workpiece thickness: 8 mm, max. workpiece weight: 200 kg, rapid traverse X/Y: 80 m/min / 60 m/min. Turret stations: 20, turret speed: 30 rpm, tool type: thick turret, max. tool diameter: 89 mm. Travel speed: 100 m/min, punching accuracy: 0.1 mm, positioning accuracy: 0.08 mm, oil tank capacity: 330 l, max. operating pressure: 300 bar. Machine dimensions X/Y/Z: approx. 5900 mm / 6300 mm / 2500 mm, weight: approx. 13,500 kg, control: Siemens Sinumerik 840D. The machine table has been extended. No machine enclosure. Documentation available. An on-site inspection is possible. Ijdpfx Aovf Ix Hoh Djtn

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), A complete sheet metal cutting line is available. 1) Schleicher H-B4-1250 decoiler, year of manufacture: 1983, power: 11 kW, max. load capacity: 12,500 kg, strip thickness range: 0.5 mm – 1.25 mm, max. strip width: 1,100 mm. 2) Schleicher RM 8-53/160 straightening machine, year of manufacture: 1980, power: 7.68 kW, strip thickness range: 0.5 mm – 1.25 mm, strip width range: 300 mm – 1,000 mm. 3) Edge trimming shear. 4) HSK HSKW/SF shear, year of manufacture: 1993, max. strip thickness: 1.5 mm, max. material width: 1,280 mm. 5) Schleicher stacking unit, year of manufacture: 1980, max. load capacity: 1,000 kg, strip width range: 300 mm – 1,000 mm, strip thickness range: 0.5 mm – 1.25 mm, feed length range: 200 mm – 1,250 mm, power: 1.5 kW. An on-site inspection is possible. Iodpfew Az Rpex Ah Detn

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Pressing force: 1200 kN, working width: 4100 mm, distance between columns: 3550 mm, table width: 215 mm, throat depth: 400 mm, stroke: 800 mm, working speed: 80 mm/s, power: 11 kW, weight: approx. 12,000 kg. An on-site inspection is possible. Iedpfsumwh Nex Ah Dstn

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), A complete sheet metal processing centre for bending and cutting, including automation, is available. Documentation is provided. An on-site inspection is possible. Itodpfxov Rp S Es Ah Den

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Working width: 4000 mm, pressing force: 2000 kN, max. operating pressure: 30 MPa, connected load: 22.38 kW, safety distance: 156 mm, holding time: 98 ms. Documentation available. On-site inspection possible. Iedpsvvl Itefx Ah Dotn

Leto izdelave: 1973, Stanje: pripravljen za uporabo (rabljen), A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. tensile strength at 2 mm thickness: approx. 70 kp/mm², max. elongation at 70 kp/mm²: 50%, strip width range: 100 mm–500 mm, strip thickness range: 0.3 mm–2.5 mm, sheet lengths: 250 mm / 1000 mm / 4000 mm / 10000 mm, strip speed range: 7.5 m–30 m/min, hydraulic operating pressure: approx. 80 bar, pneumatic operating pressure: approx. 4 bar, sheet length clarification: above 250 mm: feed and shear adjustment, above 1000 mm: with mechanical intermittent operation, above 4000 mm: with electrical on/off operation. 1) Decoiler, max. coil outer diameter: 1400 mm, coil inner diameter: 400 mm / 500 mm / 600 mm, decoiler drum expansion range: 370 mm–620 mm, spreader cylinder diameter: 125 mm, spreader cylinder stroke: 40 mm, usable width of spread segments: 600 mm, max. strip weight: approx. 3000 kp, max. strip tension: approx. 400 kp, decoiler traverse: +/-100 mm. 2) Kohler straightener, leveller roll diameter: 30 mm, roll length: approx. 600 mm, number of straightening rolls: 21, feed: 7.5 m–30 m/min, strip width range: 100 mm–500 mm, strip thickness range: 0.3 mm–2.5 mm. 3) Flying hydraulic shear, material/strip thickness/speed: matching the line, cutting frequency: 30 cuts/min, sheet length range: 250 mm–1000 mm, blade width: 600 mm. 4) Conveyor belt, belt width: 600 mm, center distance: 3500 mm. Documentation available. Inspection on site possible. Iedpfx Aswgngfjh Dstn

Stanje: pripravljen za uporabo (rabljen), Material strength range: 50kg-80kg/mm², cutting capacity for round material/square material: 130mm/145mm, minimum cutting capacity for beam profiles: 250mm/75mm, maximum cutting capacity for beam profiles: 360mm/60mm. On-site inspection is possible. Itjdpfowyxaisx Ah Dsn

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), A complete punching line with a grid punch is available. 1) Double decoiler, load capacity: 1000 kg. 2) Straightening machine Alba GGVHY 200, year of manufacture: 1992, feed rate: 6.5 m/min, max. material width: 200 mm, max. material thickness: 4 mm, transport rollers: 2. 3) Feeder Alba MA RIA 7, year of manufacture: 1978, max. material width: 300 mm, max. material thickness: 3 mm, feed speed: 40 m/min, control: Siemens S7 with OP7. 4) Grid punch HR 80/700 NL, year of manufacture: 1992, press force: 80 t, strokes per minute: 250, table dimensions X/Y: 730 mm/750 mm, ram dimensions X/Y: 730 mm/630 mm, ram stroke: 40 mm, ram adjustment: 80 mm. 5) Roll forming line CIS. Documentation available. An on-site inspection is possible. Iedpfx Ahow Az Rvo Detn

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0.4mm–1.5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right (left) / DX - SX. Components: decoiler with paper reeler, deflection rollers, double-sided film application unit, strip guiding unit, slitting shear, scrap coiler, recoiler, coil transfer cross, hydraulic units, as well as various tools and abrasive belts. On-site inspection is possible. Itsdpfjtxqtwsx Ah Djn

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), A Bühler reversing strip rolling mill, retrofitted in 2020, is available. Operating speed: 10–50 m/min, direction: reversing. Four-high mill stand: backup roll diameter: 160 mm, work roll diameter: 80 mm, roll barrel width: 80 mm, drive power: 20 kW, roll gap adjustment speed min./max.: 2 mm/min / 25 mm/min, brush diameter: 125 mm. Recoiler drum diameter: 500 mm, recoiler strip tension: 1000 N–8000 N, recoiler drive power: 30 kW, material rewinder expansion range: 300 mm–600 mm, coolant system capacity: 35 kW. Tolerance at measuring length 8 mm/50 mm: +/-0.5 µm and +/-1.5 µm, absolute thickness tolerance: +/-30 µm. Material width min./max.: 20 mm / 60 mm, max. material thickness: 2 mm, coil inner diameter: 500 mm, coil outer diameter: 750 mm, max. coil weight at 40 mm strip width: 75 kg. Total machine running hours since retrofit (2020): 91 h. Documentation available. An on-site inspection is possible. Expected to be available from September 2025. Itsdpfowqf Unsx Ah Djn

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Working width: 2550 mm, max. sheet thickness: 3 mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4 kW, weight: approx. 3000 kg. The machine has been calibrated several times but still shows inaccuracies that cannot be corrected. Documentation available. On-site inspection possible. Iedpfov Extujx Ah Detn

Leto izdelave: 1978, Stanje: pripravljen za uporabo (rabljen), Max. coil weight: 3 t, max. strip width: 500 mm, strip thickness: 0.4–5 mm, connected load: 0.55 kW. Supplied with control system, straightening machine, and Rexroth hydraulic unit, without documentation. Inspection on site is possible. Itsdpfx Ahowlihus Don

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A CNC turret punch machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools is available. 1) CNC Turret Punch Machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/- 0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18,000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. On-site inspection is possible. Iodpfx Ajwhp N Deh Detn