Dodatki in rezervni deli za kompresorje nakup rabljenega (32)

Stanje: novo, Na prodaj so rezervni deli za kompresor SIAD iz zaloge, kot so: Sesalni ventil 137 DEA 8 Sesalni ventil 78 RL z dvižnim griferjem Tlačni ventil 137 DEA 8, izvedba s kovinskimi ploščami Sesalni ventil 82 DEA 4 z dvižnim griferjem Dodpfx Asyl S Hreh Soki Na voljo več kosov

Stanje: rabljeno, Nov hladilni sušilec stisnjenega zraka, sušilec stisnjenega zraka neuporabljen iz zaloge Razvlaževalnik stisnjenega zraka SMC tip IDFA3E-23 Sušilec stisnjenega zraka, razvlaževalnik stisnjenega zraka Tov. št.: PP0213S Leto izdelave: 2011 Sušilec stisnjenega zraka SMC IDFA velikost 3E Pretok na uro: 12.000 litrov/h (12 m³/h) Pretok na minuto: 200 litrov/min. Obratovalni tlak maks. 10 bar Djdpfx Asyif I Uoh Sjki Obratovalni tlak 0,15 do 1,0 MPa (po navedbi proizvajalca) Hladilno sredstvo: R134a Temperaturno območje: 5°C do 50°C Poraba energije: 180 vatov Električni priključek: 230 V, 50 Hz, 1,2 A Priključni cevni navoj: 3/8" - Izmenjevalec toplote iz nerjavečega jekla, zračno hlajen kondenzator - Ločevalnik kondenzata z avtomatskim izpustom - Izpust kondenzata preko cevi Dimenzije D x Š x V: 410 x 226 x 473 mm Teža: 18 kg Nov, neuporabljen, kot nov iz zaloge

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and lifetime of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main construction components include: 1. Air-to-air heat exchanger In the first stage of the process, inlet air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the use of counterflow, heat recovery enhances the overall energy efficiency of the system. 2. Refrigeration system evaporator In the second stage, the compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Dkodpfx Ahemt Dcxs Sji Flow capacity: 7,000 l/min Power: 1.37 kW Supply voltage: 230 V Dimensions (L x W x H): 1000 x 550 x 920 mm Weight: 95 kg Refrigerant type and quantity: R410a, 900 g

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsations within the system, protect the optimal operation mode of the compressor, partially remove moisture and oil from the compressed air, and create a reserve of air. Pressure Vessel 1000L – Description The compressed air pressure vessel is a cylindrical pressure device consisting of two elliptical ends, a shell with fittings, and valves. Its primary function is to reduce pulsations in the compressed air system, contributing to optimal compressor operation and aiding in the removal of moisture and oil from the compressed air. High-quality pressure vessels prove especially effective in demanding operating conditions. Our 1000-liter, 11 bar pressure vessel is a robust and capacious unit, ideal for storing compressed air and other gases under high pressure. It is engineered to withstand high pressure and ensure safe gas storage. This tank is suitable for various industries such as manufacturing, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air-producing equipment, providing a reliable gas source for both industrial and general-purpose applications. Thanks to its 1000-liter capacity, the tank allows for longer operating periods without frequent refilling. The 11 bar pressure rating means the vessel can store gas at high pressure, which is extremely useful for applications requiring more power. Our 11 bar, 1000 L pressure vessel is solidly built from high-quality materials, ensuring durability and safety. It is equipped with appropriate valves and safeguards that prevent leaks and maintain secure pressure levels. Additionally, our tank is supplied with complete documentation, certificates, and attestations, including material data used in the manufacturing process. It has also undergone inspection by a Notified Body of the Office of Technical Inspection. It features a nameplate bearing the CE mark and the number of the Notified Body. In summary, the 1000-liter, 11 bar pressure vessel is a reliable device that allows for the storage of compressed air or other gases under high pressure. Its versatility makes it a consistent source of gas for numerous industrial or utility applications. Our offer includes a broad range of pressure vessels in various capacities, making it easy to select a model tailored to the specific needs of your facility layout. Our tanks are manufactured from durable steel with increased pressure resistance and are coated with a specially prepared paint on both the interior and exterior surfaces. Both vertical and horizontal mounting models are available, allowing flexible adaptation to individual requirements. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg): 230.00 Connections: 8 Connection size: 1/2", 2" Dimensions: 222.7 x 85 cm Tank capacity (L): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Djdpev Axzmofx Ah Soki Manufacturer: Cormak

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, COMPRESSED AIR TANK 500 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR INSTALLATIONS Key Advantages of the 500 L Pressure Vessel Professional pressure-resistant construction – made from high-grade 4 mm thick steel, resistant to pressure and corrosion. Dedpfx Ahjxbzbpj Seki UDT Certification and CE Marking – compliant with European safety and quality standards. Working pressure of 11 bar – suitable for most pneumatic systems, including those with increased requirements. High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces the frequency of compressor start-ups. Multi-connection system – as many as 6 ports with diameters of 1.1/4", 2", and 1/2" allow flexible connection of the tank to various installations. High-quality workmanship – durable anti-corrosive coating inside and outside the tank. Universal installation position – vertical design saves space in the facility. Design and Technology – Robust Construction for Demanding Applications This compressed air vessel is designed for intensive use in industrial environments. The body, made from 4 mm thick structural steel, ensures resistance to pressures up to 11 bar and allows for long-term operation. All welds are subject to rigorous quality control and the tank surfaces are protected by a corrosion-resistant coating that withstands chemical and environmental factors. The tank comes equipped with a nameplate featuring the CE mark and the notified UDT body number, confirming its approval for use on the Polish and European market. The set includes comprehensive technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pieces – diameters 1.1/4", 2", 1/2" Nameplate with CE symbol Notified UDT body number Complete technical documentation and pressure certificate Internal and external anti-corrosion coating

Stanje: novo, Leto izdelave: 2026, COMPRESSED AIR TANK 270 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Main advantages of the 270 L pressure vessel: - Professional pressure vessel construction – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with increased requirements. - High capacity – 270 liters – enables stable supply to the pneumatic installation and reduces the frequency of compressor start-ups. - Multi-connection system – as many as 5 connections (1", 2", 1/2") for flexible integration with various installations. - Superior build quality – durable anti-corrosion coating applied both inside and outside the tank. - Universal mounting orientation – vertical design saves space in your facility. Dkedpoxbzaljfx Ah Soi Construction and technology – robust design for demanding industrial applications This compressed air tank was engineered for intensive use in industrial environments. The tank body is made from structural steel with a 4 mm wall thickness, ensuring resistance to working pressures up to 11 bar as well as long-term durability. All welds undergo rigorous quality control, and the entire tank is protected with an anti-corrosive paint coating, resistant to chemical and environmental factors. The tank is supplied with a nameplate featuring the CE mark and the UDT notified body number, confirming its compliance for use on the Polish and European markets. Complete technical documentation, passport, and material certificates are provided. Standard equipment: - Connection ports: 5 pcs – diameters 1", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosive coating

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the downstream air flow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigerated air dryer is engineered for maximum efficiency and durability. Key design elements include: 1. Air-to-air heat exchanger In the first stage of operation, the inlet air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. The use of a counter-flow setup enhances heat recovery and improves the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This process results in condensation of the water vapor and oil particles contained in the air. Dedpfx Ahjmt Dcqj Sski 3. Condensate separator After cooling, the gas and condensate mixture is directed to a high-efficiency separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology allows intelligent adjustment of cooling intensity according to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 59 kg Refrigerant type and quantity: R410a, 650 g

Stanje: novo, Leto izdelave: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key advantages of the 500 L pressure vessel - Professional pressure-resistant design – made from high-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliance with European safety and quality standards. - Operating pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - Large capacity – 500 liters – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. - Multi-connection system – as many as 6 ports in sizes 1.1/4", 2", and 1/2" allow flexible integration into different systems. Dsdjxby D Ajpfx Ah Soki - Premium quality finish – durable internal and external anti-corrosion coating. - Universal installation – vertical design saves space in the workshop. Construction and technology – robust design for demanding applications This compressed air tank is engineered for intensive use in industrial environments. The shell’s 4 mm wall thickness of structural steel ensures resistance to working pressures up to 11 bar and provides long-term durability. All welds undergo strict quality control, and the tank surfaces are protected by a corrosion-resistant coating, durable against chemicals and environmental factors. The tank is fitted with a nameplate bearing the CE marking and UDT notified body number, which authorizes its use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and materials certificates. Precision and operational efficiency – stable pressure and optimized compressor performance With its large 500 L capacity, the vessel acts as an air buffer, stabilizing system pressure. This ensures smooth operation of all compressed air-powered devices and significantly extends compressor life by minimizing its start-stop cycles. The vertical configuration allows for space-efficient installation, ideal for facilities with limited space. A properly matched tank minimizes pressure drops and prevents overload in the pneumatic system, thereby boosting overall efficiency and safety. Standard equipment - 6 connection ports: sizes 1.1/4", 2", and 1/2" - Nameplate with CE marking - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. Dkedpfsmt Dbhex Ah Ssi The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Leto izdelave: 2026, stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dkedpfemt Dcfjx Ah Soi Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK pressure vessel with a capacity of 200 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimised design and high pressure resistance, the tank serves effectively as both a storage buffer and a stabilising element for compressor performance. Key features of the 200 L pressure tank: - Professional pressure-resistant design – manufactured from high-grade 4 mm thick steel, ensuring resistance to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - Large capacity – 200 litres – allows steady supply to the pneumatic installation and reduces compressor start frequency. - Multi-connection system – 6 connections with diameters of 1/2", 1", and 2" provide flexible integration into various systems. - High-quality finish – durable anti-corrosive coating applied inside and outside the tank. - Versatile installation – vertical design enables space-saving placement within any facility. Technical specifications: Dkedexbzd Repfx Ah Soi Weight (kg): 80 Connections: 6 Connection sizes: 1/2", 1", 2" Dimensions: 166.5 x 45 cm Tank capacity (l): 200 Working pressure (bar): 11 Wall thickness (mm): 4 Diameter (mm): Ø 450 Height (mm): 1665 Standard equipment: - Connection ports: 6 pcs – diameters 1/2", 1", 2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Stanje: rabljeno, Spare parts package consisting of various spare parts and filters for compressors and refrigerated dryers from the manufacturers BOGE, MATTEI, and BEKO. Dedpeqapixsfx Ah Soki Individual spare parts from the package can also be offered upon request. Detailed photos can be provided.

Stanje: novo, Leto izdelave: 2026, Set of essential filters for oil changes in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10. The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating in the system. It removes contaminants and metal particles resulting from normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the service life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduction of friction and overheating, longer oil service life. The air filter is the first line of defense for your compressor. It effectively traps solid particles, dust, and environmental contaminants before they enter the screw block. Using a clean air filter prevents abrasion of compression elements and minimizes the risk of oil and final compressed air contamination. Purpose: Protecting the screw block and the entire system from environmental contaminants. Benefits: Increased compressor longevity, maintained performance, reduced energy consumption. Dkjdpfx Ahoycf Nus Sei The oil separator filter (separator) is a key component in oil-lubricated compressors that separates oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (lower oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter materials with a large surface area and precise micron ratings. Optimal Price: We provide high quality at a competitive price, offering a cost-effective alternative to original spare parts. Take care of your CORMAK compressor today!

Stanje: novo, Leto izdelave: 2026, Set of filters essential for oil changes in CORMAK screw compressors – model: LUFT 400 The oil filter is indispensable for maintaining the cleanliness of the lubricating oil circulating within the system. It removes contaminants and metal particles generated through normal wear and tear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the service life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Dkedeycf Iqepfx Ah Sei Benefits: Protection of bearings and screw elements, reduced friction and overheating, extended oil life. The air filter serves as the first line of defense for your compressor. It effectively captures solid particles, dust, and environmental debris before they reach the screw block. Using a clean air filter prevents abrasion of compression elements and minimizes the risk of contamination in both oil and compressed air. Purpose: Protects the screw block and the rest of the system from environmental impurities. Benefits: Increased compressor lifespan, sustained performance, lower energy consumption. The oil separator filter (separator) is a key component in oil-injected compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and maintaining high standards in production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by efficiently separating oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: Offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter materials with large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering a cost-effective alternative to original parts. Take care of your CORMAK compressor today!

Stanje: novo, Leto izdelave: 2026, Essential filter set for oil changes in CORMAK screw compressors – suitable for models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10. The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating within the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts and extends the service life of the oil separator. Purpose: Removal of impurities from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduced friction and overheating, longer oil lifespan. The air filter is your compressor’s first line of defense. It effectively captures solid particles, dust, and ambient contaminants before they reach the screw block. Using a clean air filter prevents abrasion of compression components and minimizes the risk of oil and compressed air contamination. Purpose: Protection of the screw block and the rest of the system from environmental contaminants. Benefits: Increased compressor longevity, maintained efficiency, lower energy consumption. The oil separator filter (separator) is a key component of oil-lubricated compressors, designed to remove oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective oil mist separation. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Dksdpfx Aheycf Hmj Soi Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter materials with large surface area and precise micron ratings. Optimal Pricing: We deliver high quality at a competitive price, offering an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Stanje: novo, Leto izdelave: 2026, Set of filters required for oil change in CORMAK screw compressors – compatible with models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 The oil filter is essential for maintaining the cleanliness of lubricating oil circulating in the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the service life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduced friction and overheating, extended oil life. The air filter is your compressor’s first line of defense. It effectively blocks solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear on compression elements and minimizes the risk of oil and compressed air contamination. Purpose: Protection of the screw block and the entire system from environmental contaminants. Benefits: Increased compressor lifespan, maintained performance, reduced energy consumption. The oil separator filter (separator) is a key component of oil-injected compressors, designed to separate oil droplets from compressed air. A high-quality separator ensures a minimal oil content in outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively separating oil mist. Dsdpfx Ahsycf D Sj Sjki Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Complete Compatibility: The supplied filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of large-surface, fine-micron filtration materials. Optimal Price: We deliver high quality at a competitive price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana Dkjdjxpqzujpfx Ah Sei - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Teža: 230 kg Dobro ohranjen

Stanje: dober (rabljeno), Emulsion splitting system oil-water separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water complies with legal regulations for discharge into the sewer system. Dksdpfx Ahob A Iy Hj Sei - Weight: 70 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.950 mm, skupna širina: 1.500 mm, skupna višina: 1.500 mm,

Leto izdelave: 2012, stanje: novo, številka stroja/vozila: 201403250027, For sale: two-stage high-pressure rotary screw compressor – Sullair 20/12. We have several units available. The screw elements are suitable for Sandvik drilling rigs. Brand new units. Specifications: Model: 20/12 Series 1500 Djdpfx Ahsilqpho Sski Capacity (cfm): 1500 Speed (rpm): 2100 Rated pressure (psig): 350 Approximate weight (kg): 1066 Dimensions: L x W x H 120 x 91 x 106 cm (47" x 34.8" x 42") Since this model is most popular in the USA, we can arrange delivery to Chicago at our expense. If you are interested, please feel free to contact me.

Stanje: rabljeno, Filtrirna armatura, filtrirna enota DONALDSON ULTRAFILTER za kompresorske sisteme Dvojni filter, stopničasti filter Normalni volumenski pretok: 1440 m3/h = 24.000 litrov/min. Velikost ohišja: 0072 Volumen rezervoarja: ca. 5 litrov 1 kos z fini filtrirni element (velikost 20/30) 1 kos s pred-filtrirnim elementom (velikost 20/30) Dkodpfxoxf Uukj Ah Soi Obratovalni tlak: maks. 16 bar Navojni priključek: G 2 1/2" Prirobnica: DN 100 Vgradna širina prirobnic: 580 mm - Diferencialni manometer tlaka - Avtomatski ločevalnik kondenzata UFM T10, 230 Volt (0,11 litra/min) - Ohišje filtra iz aluminija Teža: ca. 35 kg Dimenzije D x Š x V 1030 x 850 x 200 mm dobro ohranjeno Na voljo 2 kosi, vsak 1x kot grobi in 1x kot fini filter – nato uporaben kot dvojni ali stopničasti filter.

Stanje: novo, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oil Separator Cartridge 6.2010.0 Original Kaeser Spare Part Dkedpfx Ahovkfzis Soi From stock clearance We are on company holiday until 06/01. Your enquiry will be processed afterwards. Warranty and returns are excluded from this listing.

Stanje: novo, Atlas Copco ROTO Synthetic Fluid FOODGRADE, 20-liter container Also available in 5-liter containers Dedpevkf A Hofx Ah Seki From stock clearance We are on company holiday until 06 January. Your inquiry will be processed afterwards. Warranty and returns are excluded for this listing.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Control Line Kit complete incl. fitting 403574.0 Original Kaeser spare part Dkodpfxevkfw Ro Ah Soi From stock clearance We are closed for company holidays until 06.01. Your inquiry will be processed afterwards. Warranty and returns are excluded from this listing.

Stanje: novo, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Air filter cartridge 6.4566.0 Original Kaeser spare part Dkodpfsvkfyxex Ah Sei Suitable for Kaeser compressors: M50, M36, M43, M45, M64, M52 From stock clearance We are on company holiday until 06.01. Your inquiry will be processed thereafter. Warranty and returns are excluded for this listing.