Stanje: rabljeno, Leto izdelave: 2001, rabljen električno ogrevan bitumenski rezervoar Ihjdpoxrpg Uofx Af Tjt - prostornina 40 m³ / 60.000 l - demontiran

Stanje: rabljeno, New: Yes Processable Material: Bitumen Unladen Weight: 18,000 kg Fully Automatic Polymer Modification Plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feed: Bitumen-polymer premix Throughput: max. 15 t/h Density: 1.1 g/cm³ Viscosity: max. 20,000 mPa s (cP) Temperature: 190°C Solid Matter: Machine inlet: max. 3-6 mm Machine outlet: max. 0.2 mm MOTOR 130 kW Speed 3,000 rpm Voltage 400 V, 50 Hz, 3-phase Start method Y/Δ 2. VERTICAL MIXING TANK a) Frame - Manufactured as a vertical rectangular profile. - Built to dimensions with a volume of 11 m³. - The body is made of 5 mm St37-grade steel plate. - Bitumen inlet pipe: 3" DN80, PN16, DIN2633, 1 unit; Outlet pipe: 3" DN150, PN16, DIN2633 and 3" DN80, PN16, DIN 2633, 2 units. - Service access cover: 500 x 500 mm. Ihodpfxex D Df Ne Af Tet b) Heating - Externally heated with a diathermic hot oil system. - Leak tightness test conducted at minimum 6 bar. c) Insulation - 100 mm rock wool with wire mesh, according to TSE (Turkish Standards Institute). - Outer surface made of stainless steel sheet, cut to fit tank dimensions. d) Mixing System - 2 x 7.5 kW mixing motors, 60 rpm - Driven by chain sprockets - Leak tightness maintained at shaft seals. - Bearings are SKF or FAG. - Fixed paddles mounted on the outer walls to enhance dispersion and provide a homogeneous structure. e) Heat indicators are both digital and analog with two outputs. f) Integrated connection paddles, ladders, and platform included. 3. BITUMEN PUMPS - 2½ XLA type with oil heating. - Pump capacity: 25 t/h bitumen pumping. - Driven by 7.5 kW, 400 rpm geared motor. 4. SBS FEED UNIT (POLYMER MODIFIED GRANULE) a) Feed Hopper - Feed hopper opening: 500 x 500 mm. - Made of 4 mm steel plate. - Granulate feed helix with a capacity of 30 m³/h fitted. - Frame wall thickness: 5 mm, pipe diameter: 220 mm. - Leak tightness assured at shaft seals. - SKF or FAG bearings used. - 5.5 kW, 80 rpm geared motor with coupling drive. 5. PIPEWORK AND ACCESSORIES a) Pipes - Steel pipes per DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25). - Mill line manufactured with a 3-inch inner pipe and 4-inch outer jacket pipe. - Jacket pipes welded according to TSE standards. - Bridging pipes installed at relevant junctions, 1 inch. b) Expansion joints - DN50, DN80, PN16, 400°C. c) 3-way and 2-way heated valves - Conform to TSE standards. - Pneumatic control fitted. - Designed for high-pressure (16 bar) and high-temperature (230°C) operation. d) Hot oil valves - KLINGER or THERMO branded piston-type hot oil valves. - DN25 PN16, DN65 PN16, DN50 PN16...

Stanje: novo, moč: 450 kW (611,83 KM), vrsta goriva: plin, barva: modra, Leto izdelave: 2021, Year of manufacture: 2021 Unladen weight: 215,000 kg Engine brand: Perkins Cargo capacity: 4,000 l Robust asphalt plant: 240 tonnes/hour 1.1 COLED AGGREGATE FEEDING CHASSIS 5 1.2 Feeding bunkers and metering conveyor belts 1 + 1 1.3 Collector and dryer mounted on conveyor belt 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER UNIT 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate discharge head 1 1.9 Burner unit (BALTUR) 1 SET 1.10 Burner fuel pump 1 1.11 Burner blower 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt mixer + hot aggregate elevator 1 2.3 Total scale bunker 1 2.4 Filler elevator and scale bunker 1 2.5 Filler screw conveyor 1 2.6 Bitumen weighing bunker 1 2.7 Mixing bitumen pump 1 2.8 Undersized hot aggregate silo (50T) 1 2.9 Filler silo 25 m³ 1 Ijdpfxsx D Dfcs Af Toht 2.10 Vibrating screen 1 3 DUST COLLECTION FILTER SET 3.1 Jet-pulse filter body 1 set 3.2 Nomex filter bags and cartridges 1 set 3.3 Dust collector V spiral and bunker 1 + 1 set 3.4 Filler silo (25 tonnes) 1 set 3.5 Filler screw conveyor 1 set 3.6 Filter extraction fan 1 set 3.7 Flue gas duct 1 set 3.8 Housing group 1 set 4 BITUMEN STORAGE TANK 4.1 40 tonne capacity bitumen tank with thermal oil heating and insulation 4 SETS 4.2 3-way pneumatic jacketed valve group 2 SETS 4.3 Bitumen transfer pump 1 SET 4.5 Mixing bitumen scale feed line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double-walled bitumen pipe installations 1 SET 4.8 30 tonne bitumen tank for thermal oil heating 3 SETS 4.9 3-way pneumatic jacketed valve group 2 SETS 5 FUEL AND THERMAL GENERATOR CHASSIS GROUP 5.1 1,500,000 kcal / h thermal oil generator 1 SET 5.2 Heating oil boiler 1 SET 5.3 Circulation pump for boiling oil 1 SET 5.4 Fuel refilling pump 1 SET 5.5 Fuel pump 1 SET 5.6 Automation - control cabin - software - compressor 1 SET

Stanje: novo, Unladen weight: 16,000 kg Fully Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m³/h) 1 unit 2. FOAM TANK (5 m³) 1 unit 3. BITUMEN FEED PUMP 1 unit 4. FOAM LINE SYSTEM 1 unit 5. PIPE NETWORK AND EQUIPMENT 1 unit 6. CONTROL PANEL 1 unit 7. CHASSIS 1 unit FOAM TANK (1 unit) A. Frame - Box section profile - Capacity: 5 m³ - The tank body is manufactured from 3 mm AISI 304 stainless steel sheet - Weld joints are produced using appropriate stainless steel TIG welding B. Heating - 2-inch stainless steel tubing - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 Ihsdpfxox D Dd So Af Tjt - Pressure test carried out at 6 bar C. Mixing system - 3 kW mixer motor, 60 rpm - Chain drive - Sealing is ensured with packing glands - Bearings are SKF or FAG - Fixed paddles mounted on the external walls to improve dispersion and ensure a homogeneous mixture D. Temperature display is both digital and analog; two outputs available - Maximum capacity of the bitumen pump: 8 m³/h - Coupled to a 7.5 kW, 400 rpm geared motor - The bitumen flow meter system has a capacity of 10 m³/h. A. Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line is made as 1.5" internal pipe and 2" outer jacket pipe - Jacketed pipes are welded according to TSE standards - Bypass pipes (0.5") fitted at suitable points B. Compensators - DN50, DN80, PN16, 200°C C. 3-way and 2-way valves with heating - Compliant with TSE standards - Suitable for high pressure (16 bar) and temperature (230°C) D. Hot oil valves - Hot oil valve (brand KLINGER or THERMO), heat-resistant - DN25 PN16, DN65 PN16, DN50 PN16 E. Filter - Made with 3 mm wire inner basket, easy and frequent cleaning possible - Panel assembled to IC standard.

Stanje: novo, Unladen weight: 120,000 kg Load compartment volume: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h of road mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: • Aggregate temperature at dryer inlet 10°C. • Sea level altitude • Average density of feed aggregates: 1,650 kg/m³ • Heavy fuel oil No. 6 Calorific value ≥ 9,200 kCal/kg • Heavy fuel oil No. 4 Calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Calorific value of natural gas ≥ 7,600 kCal/kg • Temperature increase of hot aggregates: 160 K • Residual moisture content of the mix 0.3% • Max. aggregate size: 40 mm • Passing material through 3 mm sieve: 35% • Material non-porous and non-hygroscopic, with regular shape • Production tolerance rate according to environmental and parameter conditions ±4% COLD AGGREGATE BUNKERS • Four cold aggregate bins made from 5 mm St 37 steel sheet are required, each with a capacity of approximately 20 m³ and constructed separately. • Each bunker must have a 800 mm high upper extension made from 6 mm sheet metal to prevent material overflow. Iedsx D Dbqjpfx Af Tjht • Material discharge from the bins must be achieved with a moving group. • Material discharge flow of each bin must be frequency-controlled (speed-regulated) upon request and adjustable via the computer screen. • The flow rate of the discharged material, as well as the number of bins, must be adjustable from a manual gate, enabling installation at each individual bunker. • A warning system must be installed to alert the operator if aggregates run out, displaying a warning sign on the computer screen. • The vibrator motor, controlled from the computer screen, must be positioned to relieve the material flow and prevent blockages in the bins, especially with fine materials. • A conveyor belt system must be installed below each bin to ensure material discharge. • Each bin must be equipped with modular grates made of 10x50 mm steel sheets with 10 mm diameter. • The silo loading width must be 3000x2400 mm. • An emergency cable stop system must be provided for emergencies. • Possible malfunctions in the belts must be displayed on the computer screen. 2. SUB-BUNKER: COLD AGGREGATE COLLECTOR BELT • The horizontal belt must transport the aggregate drawn from each bin separately and in a controlled manner to the inclined dryer feed belt, with the capacity to supply a 160 t/h plant. • The rubber belt must be 10 mm thick, 800 mm wide, four-ply fabric with 4 EP 125 grades. • Start/stop operation of the belt shall be controlled via the computer screen. For seasonal discharge, the belt can be run in reverse independently of the other units. • The horizontal belt chassis must be manufactured from steel structures, allowing smooth operation and incorporating a belt tensioning system. • The belt must be equipped with a separation system at each end. • The drive drum must be rubber-coated and set at a 1-degree angle. • For emergencies...

Stanje: rabljeno, New: Yes Color: Silver Usable Material: Bitumen Empty Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANKER (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and the Highway Commission regulations. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine pipework for heating • Bitumen temperature adjustable up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling opening, ventilation system, inspection hatch, and drain. • The tank must be supported by support legs underneath, insulated with 50 mm rock wool, and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR Iodpfx Asx D Dbkef Teht • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless, double-walled steel thermal oil pipe, and have a circulation body. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet. • The generator system must be manufactured according to production standards and must include: an expansion tank, degasser, oil filter, valves, fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The heating coil must be made of at least 30 m2 of seamless steel pipe. • The generator must be equipped with an integrated warning system to protect the entire system in case of hazardous hot oil level or low heat transfer oil level. • The burner system must be designed to activate automatically according to the set operating temperature of the heat transfer oil. • The system must be manufactured as a complete package.

Stanje: rabljeno, New: Yes Color: Silver Usable Material: Bitumen Empty Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANKER (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and the Highway Commission regulations. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine pipework for heating • Bitumen temperature adjustable up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling opening, ventilation system, inspection hatch, and drain. • The tank must be supported by support legs underneath, insulated with 50 mm rock wool, and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. Iedpsx D A R Defx Af Toht • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless, double-walled steel thermal oil pipe, and have a circulation body. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet. • The generator system must be manufactured according to production standards and must include: an expansion tank, degasser, oil filter, valves, fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The heating coil must be made of at least 30 m2 of seamless steel pipe. • The generator must be equipped with an integrated warning system to protect the entire system in case of hazardous hot oil level or low heat transfer oil level. • The burner system must be designed to activate automatically according to the set operating temperature of the heat transfer oil. • The system must be manufactured as a complete package.

Stanje: novo, Lastna masa: 290.000 kg Prostornina tovornega prostora: 3.000.000 l Ihodox D A Rqspfx Af Tjt

Stanje: rabljeno, New: Yes Usable Material: Bitumen Unladen Weight: 16,000 kg Fully Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 unit 2. FOAM TANK (5 m3) 1 unit 3. BITUMEN FEED PUMP 1 unit 4. FOAM LYE SYSTEM 1 unit 5. PIPEWORK AND EQUIPMENT 1 unit 6. CONTROL PANEL 1 unit 7. CHASSIS 1 unit FOAM TANK (1 unit) Frame: - Box section profile - Capacity: 5 m3 - The tank body is made of 3 mm stainless steel plate, AISI 304 - Welds made using appropriate stainless-steel TIG welding b) Heating - 2" stainless steel tubing - Oil inlet and outlet pipes are 1" DN50, PN16, DIN 2633 - Leak test performed at 6 bar pressure c) Mixing System - 3 kW, 60 rpm mixing motor - Driven by chain sprockets - Tightness ensured at seals - Bearings are SKF or FAG - Fixed paddles are mounted on the outer walls to enhance dispersion and provide a homogenous mixture d) Temperature indicators are both digital and analog; two outputs are provided - Bitumen pump capacity max. 8 m3/h - Coupled to a 7.5 kW, 400 rpm gearmotor - Bitumen flow meter rated for up to 10 m3/h Iodpfx Asx D A Rkof Tsht a) Pipes - Steel pipes per DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line built as 1.5" inner pipe and 2" outer jacket pipe - Jacket pipes welded according to TSE standards - Bridging pipes made in 0.5" at suitable positions b) Expansion Joints - DN 50, DN 80, PN 16, 200°C c) 3-way and 2-way valves with heating - Conform to TSE standards - Designed for high pressure (16 bar) and temperature (230°C) operation d) Hot Oil Valves - Hot oil valve by KLINGER or THERMO, heat resistant - Sizes: DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Made with 3 mm wire internal container, designed for frequent and easy cleaning The panel is assembled in accordance with IC standards.

Leto izdelave: 2020, Stanje: novo, številka stroja/vozila: 373064736, Horizontal bitumen tank Capacity: 50 m³ Thermal oil heated Condition: NEW This offer is non-binding; input errors and mistakes excepted. Only the specific agreements stated in the order confirmation or sales contract are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC). These are available at any time on our website or can be provided upon request. Place of jurisdiction is Eberswalde, Germany. Further information Ihjdpfxoi Aqikj Af Tst Intended use: Construction industry General condition: very good Technical condition: very good Visual condition: very good,

Stanje: rabljeno, Polygonmach bubnjasta mešalica ili kontinuirani tip asfaltne baze je vrsta asfaltne baze u kojoj se procesi grejanja i mešanja odvijaju neprekidno unutar rotirajućeg bubnja. Funkcije Polygonmach bubnjaste/kontinuirane asfaltne baze uključuju: Skladištenje i rukovanje agregatima: Postrojenje poseduje silose ili bunkere za skladištenje agregata različitih frakcija. Ovi agregati se sortiraju i doziraju u postrojenje na dalje procesiranje. Iodpfxox Dx Dme Af Toht Sušenje i zagrevanje: Agregati se uvode u rotirajući bubanj gde se zagrevaju i suše pomoću toplih gasova. Ovaj proces uklanja vlagu iz agregata. Skladištenje i zagrevanje bitumenskog veziva: Postrojenje poseduje rezervoare za skladištenje bitumenskog veziva, koje se zagreva na određenu temperaturu pre unošenja u bubanj. Mešanje: Tokom prolaska kroz bubanj, agregati dolaze u kontakt sa vrućim bitumenskim vezivom i kroz proces mešanja nastaje asfaltna masa. Skladištenje i istovar: Gotov topli asfalt privremeno se skladišti u silose ili bunkere do otpreme na kamione za transport do gradilišta. Polygonmach bubnjaste/kontinuirane asfaltne baze koriste se u raznim primenama, kao što su izgradnja puteva, autoputeva, aerodromskih pista i u velikim projektima asfaltiranja. Opcija: kontinuirana Kapacitet: Maks: 400 t/h (245 lb/s) Min: 40 t/h (24 lb/s)

Stanje: rabljeno, Leto izdelave: 1995, obratovalne ure: 2.612 h, Since 1972, your reliable partner for all matters related to automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always maintains around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer you attractive financing options at special discounted rates. If interested, we are happy to provide you with a customized offer! Trade-in of your commercial vehicle or construction equipment is welcome. If a new TÜV inspection is required, we will be glad to provide a quote from one of our partner workshops. Please note that our offers generally DO NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by one of our external partners is available at an additional cost. All details provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to errors and prior sale. Isdpjv Nt Eyofx Af Tsht

Stanje: rabljeno, prevoženi kilometri: 263.069 km, moč: 154 kW (209,38 KM), vrsta prenosa: mehanski, vrsta goriva: dizel, barva: oranžna, skupna masa: 16.000 kg, lastna masa: 9.840 kg, število sedežev: 3, prva registracija: 06/2002, Leto izdelave: 2002, obratovalne ure: 10.533 h, Oprema: dodatne luči, hidravlika, kabina, Stroj za označevanje cest: + Hofmann + H75-1000 + Termoplast + Električni grelec (400V) + Termo posoda s plinskim grelcem in hidravličnim mešalom + Pršilniki za barvo in kroglice levo/desno + Računalnik za črte + Zadnje in sprednje opozorilne luči + Kompresor CompAir DLT 0404 z Deutz dizelskim motorjem (9.513 delovnih ur) + Pogonski motor Kubota Diesel V1505 (22.975 delovnih ur) + Podvozje Renault Midlum 210 + Prva registracija: 10.06.2002 + 263.069 km; 10.533 delovnih ur + 3-sedežni + Ročni menjalnik z redukcijo + Ročni plin Lastna teža: 9.840 kg; dovoljena skupna masa: 16.000 kg + 813 cm x 250 cm x 325 cm (d x š x v) Vsa novo dodana vozila prejmete po e-pošti – naročite se na naš NEWSLETTER! Iedsxal A Uopfx Af Tsht Možnost napak in vmesne prodaje pridržana!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: bela, Leto izdelave: 1992, obratovalne ure: 4.470 h, Oprema: kabina, klimatska naprava, Označevalni stroj: + Euroliners + Bagheera + Leto izdelave 1992 + 4.470 delovnih ur + Osnova vozila: Hansa APZ 1003H + Opcijsko 4-kolesno krmiljenje + Hidrostat + Mercedes 4-valjni dizelski motor + Ročna brizgalka zadaj + 2x rezervoar za barvo + 2x rezervoar za kroglice + Škropljenje kroglic in barve + Merilna palica z ogledalom Ihjdew T Tkbopfx Af Tet + Kompresor + Airless črpalka + Računalnik za razdeljevanje črt elexar 20 + Zadnji opozorilnik + Klima + Iz občinske lasti Prejmite vse novo dodane stroje po e-pošti – prijavite se na naš NEWSLETTER! Možne napake in pisne napake, vmesna prodaja pridržana!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta prenosa: hidrostat, vrsta goriva: bencin, barva: oranžna, število sedežev: 1, Leto izdelave: 2002, Stroj za označevanje cest: + Graco + LineLazer II 5900 + Airless črpalka + Pršilnik + Vodilo za linije + Posipalec perl + Honda GX160 motor, 5,5 KM + Letnik 2002 LineDriver: + Zelen + Zindel Variozet 3 Ijdpjw T Skgsfx Af Teht + Honda motor z električnim zagonom + Hidrostat + Ročni plin Prejemajte vsa novo dodana vozila po e-pošti – prijavite se na naš NOVIČNIK! Možne napake in tiskarske napake, vmesna prodaja pridržana!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: bencin, barva: bela, skupna masa: 750 kg, prva registracija: 07/2001, Leto izdelave: 2001, Označevalni stroj na prikolici: + Zebra 5 + Airless črpalka + Ročna šprica s kolutom za cev + Motor Honda GX200, 6,5 KM + Električni zagon + Fiksno vgrajen rezervoar za barvo Isdpsw S T Tajfx Af Toht Prikolica: + Crapie + Tip CMF750 + Prva registracija: 20.07.2001 + Kroglična sklopka + Po višini nastavljiva vlečna gred + 370 cm x 205 cm (d x š) + Dovoljeno skupna masa: 750 kg Vsa novo dodana vozila prejmite po e-pošti – prijavite se na naš NEWSLETTER! Pružamo možnost napak in predhodne prodaje!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 6 kW (8,16 KM), vrsta prenosa: hidrostat, vrsta goriva: bencin, barva: modra, Stroj za talno označevanje: + Graco Ihodpfxjw Svqzs Af Tet + LineLazer IV 250SPS + Rezervoar za barvo / posoda za kroglice + Vzporedno brizganje: 2x brizgalka / 2 trosilci kroglic + Ročna brizgalka + Hidravlični pogon, samohoden naprej / nazaj + Airless črpalka + Motor Honda GX 270, 8,4 KM Vsa novo dodana vozila prejemajte po e-pošti – prijavite se na naš NEWSLETTER! Možne napake in pravica do vmesne prodaje pridržana!

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, prevoženi kilometri: 177.262 km, moč: 76 kW (103,33 KM), vrsta goriva: dizel, barva: oranžna, Leto izdelave: 1992, self-propelled marking machine: - Iveco - Turbo Daily 49-10 - First registration: 11.05.1992 - 177,262 km - 5-speed manual transmission - electric window lifters - Dimensions: 6100 mm x 2000 mm x 2350 mm (LxWxH) - Unladen weight: 4,500 kg; gross vehicle weight: 5,000 kg Marking superstructure: - Dual pedal system - Second steering wheel on the right (non-functional) - Paint tank: Rietberg 820 l, 9 bar - Bead container - Control units - Compressor, hoses and nozzles missing - Drawers - Rear warning system - Municipal vehicle, 2nd owner A video of this offer can be found at s://youtube/watch?v=KvYYDDwK-0c Our entire vehicle stock can be found at auto-ungar. Iodpfx Afoqxudhe Tjht Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: bencin, lastna masa: 60 kg, Leto izdelave: 2017, Line marking machine: + Larius + Miro Liner Plus + Year of manufacture: 02/2017 Ijdpfx Afowwr Dcs Tjht + Yamaha MZ175 petrol engine, 5.5 HP + Miro airless pump + Spray gun + Weight: 60 kg + Machine from municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta prenosa: hidrostat, vrsta goriva: bencin, število sedežev: 1, Leto izdelave: 2004, Oprema: računalnik na krovu, spojka prikolice, Marking Machine: Graco LineLazer III 3900 Smart Control Airless pump Spray gun Guide rod Honda GX120 engine, 4 HP Linedriver III Honda GX160 engine, 5.5 HP Hydraulic drive, forward/reverse Handbrake Ijdpfx Aswgmvxef Tjht From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Funkcionalnost: nefunkcionalno, moč: 6,62 kW (9,00 KM), vrsta goriva: bencin, barva: oranžna, lastna masa: 175 kg, Leto izdelave: 1995, Line Marking Machine: + Hofmann + H8-1 + Year of manufacture: 1995 + 175 kg + 9.0 HP Honda engine Ihedpfx Afjwkf Eto Tst + Engine and compressor: working + Sold as a parts donor Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Subject to errors, omissions, and prior sale!

Stanje: rabljeno, Leto izdelave: 1979, MAN 19 280 F BREINING NADGRADNJA FEDERAL Emulzijski/asfaltni škropilnik Pozor: Primerno samo za emulzijo, ne za tekoči asfalt! Upravljalna enota za nadgradnjo v voznikovi kabini! • Ročni menjalnik • Diferencialna zapora • Daljinska kabina • 1 postelja • Listnato vzmetenje spredaj/zadaj • Pnevmatike: 12 R 22.5 (alternativa: 315 / 80 R 22.5) • Prostornina rezervoarja: 6.000 litrov emulzije • Nov gorilnik! • Dvojno zložljiva škropilna roka! Napake in vmesna prodaja so pridržane! = Dodatne informacije = Iedpfx Aewmpcnjf Toht Vrsta goriva: Diesel Prevoženi kilometri: 67.000 km Uporabni material: Asfalt Poškodbe: Poškodovano vozilo (nevozno)

Stanje: rabljeno, moč: 36 kW (48,95 KM), barva: bela, Leto izdelave: 1981, številka stroja/vozila: 176, permissible total weight 4,100 kg 3-cylinder Deutz engine Ihsdpfx Afonk U Nfe Tjt Subject to errors and omissions

Stanje: novo, Leto izdelave: 2025, Vročezračni kopje HL-1 je visokokakovostna in učinkovita oprema. Vročezračni kopje za pripravo fug za zalivanje razpok je samostojna mobilna enota za čiščenje in sušenje razpok, fug, lukenj in poškodb v asfaltnih in betonskih cestnih površinah pred zalivanjem z bitumnom ali bitumenskimi polimernimi materiali. Ihedpevpqp Aofx Af Tjt Mogočan tok vročega zraka odstrani vlago in delce odpadkov, travo, zemljo, prah, umazanijo, drobno kamenje ipd., tako da so razpoke suhe, čiste in pripravljene za polnjenje z bitumenskimi materiali. Razlogi za nakup vročezračnega kopja pri TICAB: • Nizka cena, ker ni posrednikov. • Vedno na zalogi. • 1-letna garancija. • Popolna podpora proizvajalca. Tehnične specifikacije: - Pogonski plin: propan (poraba 5 kg/h) - Delovni tlak plina: 0,2–0,3 bara - Prostornina plinske jeklenke: 50 l - Teža kompresorske enote: 107 kg - Izhodna temperatura zraka: najmanj 400 °C - Teža vročezračnega kopja: 6 kg - Dolžina vročezračnega kopja: 1500 mm - Teža stojala na kolesih: 4 kg - Zmogljivost kompresorja: 600 l/min - Moč motorja: 7 KM

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, TI-CAR univerzalni nakladač 225 Poljsko podjetje TICAB ponuja lastno opremo za krpanje in vzdrževanje cest. NAŠE PREDNOSTI: - smo proizvajalec, - naša oprema deluje v 57 državah po svetu, - zaloga dokončanih izdelkov na skladišču, - hitra obdelava individualnih naročil, - proizvodna kapaciteta 50 enot na mesec, - lasten inženirsko-konstruktorski biro – 12 inženirjev, - 15 let izkušenj v strojništvu, delujemo od leta 2009. Ihsdsvprpkepfx Af Tot Ponujamo model viličarja TI-CAR 125/225 kot univerzalni delovni stroj. Stabilna dvižna roka omogoča enostavno in varno dvigovanje bremen s paletnimi vilicami. Nastavljiv volan in sedežno vzmetenje zagotavljata manjše utrujenosti pri vožnji. Dvopedalni krmilni sistem omogoča izjemno natančno upravljanje premikanja, tudi z zahtevnimi priključki in na zahtevnem terenu. TI-CAR je učinkovit pripomoček za različna opravila v gradbeništvu, kmetijstvu, komunalnih storitvah, za izmenično natovarjanje v tovornjake, odstranjevanje snega, premikanje zemlje, transport tovora in izravnavo površin. Tehnične značilnosti: Motor – Kubota (Japonska), model – 1105; valji – 3, ali Yanmar (Japonska), model 3TNM72 Moč motorja – 18 kW/25 KM, Delovna prostornina (cm³): 784-1120 Hladilni sistem – tekočinski; Hidravlika – HANSA (Italija), Akumulator (V-Ah): 12-65 Generator (A): 40 Maks. navor (Nm): 72-77,6 Delovni vrtljaji motorja, min⁻¹ – 3000 Maks. število vrtljajev motorja brez obremenitve – 3600 min⁻¹; Maks. dvižna nosilnost na višini 50 cm, kg – 800-900 Meja prevračanja, ravni okvir, kg – 480-780 Meja prevračanja, pregibni okvir, kg – 350-500 Čas dviga roke, s – 2,8 Čas spusta roke, s – 2,1 Teža nakladača, kg – 1000-2550 Maks. višina dviga, mm – 2100-2860 Samoizravnava dvižne roke – za model 225 Delovni volumni: Hladilni sistem (l): 3,1 Motorno olje (l): 5,11 Gorivo – dizel (rezervoar – 18 l) Rezervoar za hidravliko (l): 44 Skupna kapaciteta hidravličnega sistema (l): 48 Vozne značilnosti: Potovalna hitrost (km/h): 0-13 Prelomni kot: 56° Minimalni obračalni radij v mirovanju: 1,63 m Dvižna roka z nagibno žlico: 210 cm Medosna razdalja: Zunanji premer kolesa (palci): 23’’ Notranji premer platišča (palci): 12’’ Širina pnevmatike (palci): 8,5’’ Cena viličarja*: Ti-Car 125 – 20.450 € z DDV Ti-Car 225 – 22.450 € z DDV *Vse cene izračunane v UAH po tečaju NBU na dan podpisa pogodbe. Priključki: - Cilindrična cestna metla – 4.800 € - Krtača z zbiralnikom ter funkcijo samodejnega praznjenja – 5.500 € - Žlica za transport tovora – 650 € - Vilice za zlaganje – 650 € - Snežni plug – 1.200 € - Vilice za silažo – 1.300 € - Žlica zgrabljalna – 670 €.