Prikolica

- 120to Schwerlastanhänger

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Tjdpjn Tntqjfx Agpsf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 18.000 kg, dvižna višina: 11.900 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 1.990 mm, lastna masa: 21.650 kg, skupna dolžina: 5.540 mm, vrsta pogona: Elektro, gradbena širina: 2.000 mm, Pick & Carry Kran Masttyp: Teleskop Technischer Zustand: gut Vorderreifen Typ: Non Marking Hinterreifen Typ: Non Marking Tedpfst Dd Uwsx Agpsf Fernbedienung

Stanje: novo, lastna masa: 8.000 kg, največja dovoljena obremenitev: 80.000 kg, skupna masa: 88.000 kg, konfiguracija osi: 4x2, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: hidravlika, barva: svetlo modra, Leto izdelave: 2025, obratovalna teža: 88.000 kg, Heavy-duty industrial transport trailer with hydraulic lift Tedpfx Aova E Tkjgpjf Eight axles that hydraulically raise and lower the trailer via control valve All-wheel steering Towable from both front and rear Transport deck made of 50 mm Douglas fir or without deck as per customer request Optional hand brake or air brake system Optional lighting system on both sides Further information available upon request.

Stanje: dober (rabljeno), Platformni voziček, transportni voziček, voziček za težke tovore, mizni voziček, montažni voziček, industrijska prikolica, kontejnerski dolly, prikolica za težke tovore - Platforma: 11.000/3000/H1100 mm - Nosilnost: 100 ton - Krmiljenje: možno z obeh strani - Dolžina vlečne palice: 1500 mm - Oko vlečne palice: Ø 50 mm - Število koles: 32 kosov - Velikost koles: 646/200-480 - Skupne dimenzije: 12.300/3000/H1100 mm - Teža: 12.960 kg Tjdpfx Asrd Aclogpjf - Predaja: v dejanskem stanju kot ogledano - Opomba: pozor na stanje koles

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 1.012 mm, barva: modra, Operating Conditions: The heavy-duty trailer is designed for use on level, paved surfaces for in-plant transportation. Train Operation: The trailer components are not (without a trailer coupling) designed for operation in combination with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or strip loads are permitted only upon notification. Main Frame: Robust welded construction made of section steel profiles. Loading Platform: Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covered with softwood planks, all-round recessed edge protection. Tjdjuf Rw Topfx Agpjf Steering: All-wheel steering on 4 pendulum axles, towing bar can be raised, removed, and attached from front to rear. Hitching height on towing vehicle approx. 650 mm (other hitching heights only permitted upon notification), towing eye as per DIN 74054, diameter 40 mm. Track rods with adjustable ball joint heads, diagonal or tie rods adjustable and fitted with maintenance-free joint bearings. Drawbar drop safety as per accident prevention regulations (UVV). Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even wheel load distribution, wheels with solid rubber tyres approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Finish: Top coat in RAL 5002 Ultramarine Blue. Additional Equipment: - Optional: Two-line compressed air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded actuators, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made of round steel welded horizontally into the outer frame members; use of crane eyes only when the trailer is not loaded. - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Towing bar length approx. 1500 mm Rental or sale EU-wide.

Stanje: dober (rabljeno), Clamping plate with grooves, scribing and spotting plate, measuring plate, measuring table, straightening plate, marking plate - Clamping surface: 2995 x 2500 mm - Clamping plate: with grooves, no T-slots - Height: 300 mm - Groove width: 10 mm Tedpfx Aondzycjgpsf - Groove spacing: 200 mm - Transport dimensions: 3100/2500/H300 mm - Weight: 5000 kg

Leto izdelave: 2016, Stanje: dober (rabljeno), Abus overhead travelling crane with profile rails: 2 pieces at 6000 mm each, 3 pieces at 2600 mm each, electric chain hoist with hook block, connecting hardware included. The crane has been dismantled and stored. Todpopdnw Nefx Agpsf

Stanje: novo, Table diameter: 1100 mm Table load capacity: 2 t Swivel range: 0 - 135 degrees Rotation speed: 0.1 - 1.0 rpm Torque: 4000 Nm Motor power: 1.1 / 0.75 kW Welding current: 500 amperes - Self-locking gearbox, thus no overrun or backlash under eccentric load. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled stepless speed adjustment of the rotary table. - High stability due to robust construction. - Welding current transmission. - CE certificate. - Excellent price/performance ratio. Tsdpfx Aefv Ax Aogpef - The D-HBE series is supplied as a standard version with cable remote control and foot switch.

Stanje: dober (rabljeno), Overhead crane, crane, trolley, crane travel mechanism, crane carriage, beam carriage, end carriage for bridge cranes, overhead crane end carriage, single-girder bridge crane end carriage -Manufacturer: Demag, 1 set of end carriages for single-girder bridge crane -Lifting capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 kW Todpjtpkv Ajfx Agpef -Load wheels: Ø 160 mm / beam width 148 mm, dimensions see photos -Dimensions: each 2300/650/H570 mm / 300 kg -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg (total)

Stanje: novo, Table diameter: 1,400 mm Table load capacity: 2.0 t Tsdpfx Ajfv Aw Tegpef Swivel range: 0 - 135 degrees Rotational speed: 0.05 - 0.5 rpm Torque at face plate: 6,000 Nm Table through-hole: 200 mm Welding current: 700 amperes Total power requirement: 1.1 + 2.2 kW Machine weight: approx. t ROTARY TILTING TABLE WITH LARGE THROUGH-HOLE • Self-locking gearbox – no overrun or backdriving with eccentric loads. • Electronic components by Siemens and Schneider. • Frequency-controlled for precise speed regulation. • Rotary table with large through-hole and T-slots. • High stability due to ingeniously engineered construction. • CE certified. • Excellent price-to-quality ratio. • The D-TLP series is supplied with remote control and foot pedal (left/right).