Težka prikolica

WMT D20/8,0 x 3,0

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Iedpfx Afelbmupo Teht

Stanje: novo, Leto izdelave: 2023, For sale: alligator shear, metal shear suitable for cables, pipes, and profiles. Iedpjlhrb Hjfx Af Tsht Maximum cutting force: 630 kN Cutting length: 600 mm Maximum jaw opening: 280 mm Hydraulic pressure: 25 MPa Full cycles per minute: 7–8 cycles/min Power consumption: 7.5 kW Weight: approx. 1,400 kg Dimensions (L×W×H): 1600 × 700 × 1300 mm

Stanje: novo, Load capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Isdpfx Afofrzvle Teht Heavy-duty trailer featuring: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. On request, can be supplied in your desired RAL colour. Need different load capacities or dimensions? Please contact us.

Leto izdelave: 2023, Stanje: novo, For sale: Alligator shear / cable shear, also suitable for metal processing. Model: AS/250 Max. Shear Force: 250 kN Cutting Length: 300 mm Max. Opening: 160 mm Iodjku Ag Sopfx Af Tsht Hydraulic Pressure: 15 MPa Full Cycles per Minute: 10–15 cycles/min Power Consumption: 5.5 kW Weight: 450 kg Dimensions (L×W×H): 1200 × 980 × 1200 mm

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Ihjdpfx Afehzbipj Tjt Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO Iheded Hxx Aspfx Af Tet - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT136, ! Bargain Price ! Price starting from €1,150 R.Stahl Single-Girder Suspension Crane / Bridge Crane / Crane Runway / Workshop Crane / Gantry Crane Safe Working Load: 250 kg 7 cranes available: 4: Steel Suspension Crane SWL 250 kg, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane SWL 250 kg, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane SWL 250 kg, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane SWL 250 kg, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane SWL 250 kg, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane SWL 250 kg, width 1.03 m, gauge 0.74 m (€1,150) Iedeigl R Ropfx Af Teht 11: Steel Suspension Crane SWL 250 kg, width 1.65 m, gauge 1.25 m Gauge can be modified, end carriages are fastened with 8 bolts. Runway beams (IPE 200 – not included) Trolleys are adjustable to fit beam dimensions. Includes complete control equipment and pendant controller. All cranes have full electric travel on all three axes. Lift height/hook travel approx. 4 m Power supply: 400V, 16A, year of manufacture: 2003 Very good condition, systems were solely used for maintenance purposes – hardly used. Shipping by freight forwarder, collection preferred. Location: 75053 Gondelsheim For shipping rates by postal code, please inquire. We will provide you with a prompt and non-binding offer!

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. Ihodpfxjnah Tas Af Tst By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections. Ijdpjuddcaofx Af Teht

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, skupna masa: 2.500 kg, največja dovoljena obremenitev: 2.500 kg, tip droga: teleskopski, Self-propelled battery-powered crane by renowned Italian manufacturer JMG, model MC25S with radio remote control and a lifting capacity of 2,500 kg. Brand new machine, available for inspection. Distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. DRIVE SYSTEM: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM ANGLE UP: 60° BOOM ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant structure made from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of a base unit, hydraulic telescopic system and one mechanical extension. Boom elevation and extension are hydraulically operated using telescopic cylinders. TRAVEL MOTOR: 2 electric motors, 2 kW, 24V AC, insulation class H. PUMP MOTOR: Electric motor 3 kW, 24V DC, insulation class H. DRIVE: Electronic speed control, MOSFET type. BATTERY: 24 V 420 Ah, with charge indicator. DRIVE TRANSMISSION: Front axle driven by two gearboxes. WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2 -8", 2 pcs. BRAKES: Automatic on front wheels. STEERING: Rear axle steering via electric motor. Max. steering angle ± 90°. Ijdpfx Aewtppzjf Teht CONTROL: Operated via radio remote control. HYDRAULIC SYSTEM: Powered by a low-noise 3 kW gear pump. Cylinders operated by an electro-proportional distributor controllable via radio remote. Equipped with a filter and safety valve. Max. working pressure 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter. STANDARD EQUIPMENT: • Max. lifting capacity 2.5 t • Front wheel drive via two gearboxes (one per wheel) • Hydraulically telescoping boom (1 fixed section, 2 telescopic sections) • Manual mechanical boom extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and travel • Electronic load indicator and limiter compliant with CE standards • Boom inclination +60° / -15° • CE conformity declaration • Operation manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tires • Battery water refilling system • On-board mobile charger • Manual three-position jib (1.0 t)