CNC stružnica

**USED COLCHESTER** Tornado 220M 3 Axis T40065

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Romunski stružnica SARO SPS 1250x9000 Proizvajalec: Saro Targoviste Leto izdelave: 1997 Premer vpenjalne glave: 1250 mm Največji premer obdelave nad ležiščem: 1250 mm Premer vretena: 250 mm Razdalja med konicama: 9000 mm Največji premer obdelave nad prečnim suportom: 920 mm Največja teža obdelovanca med konicama: 15.000 kg Brusni nastavek na voljo! Podpfxey Icbaj Amfera Video stroja v delovanju na voljo Teža okoli 25 ton

Stanje: dober (rabljeno), Leto izdelave: 2006, Obdelovalni center Hurco VMX 30 s Kitagawa 4. osjo, IKZ, NC primež 125, različni nosilci orodij, dobro vzdrževano stanje Podpjxrcnlefx Amfora

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Pedpfstrvzxex Amfjra Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Prjdpfx Amjvz Ec Iofoa Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 - Documentation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Podjtwy Dispfx Amfjra Electrical connection: 380 V, approx. 15 kVA Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, CNC stružnica z osjo C MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Proizvajalec: MAZAK Tip: QUICKTURN NEXUS 250-IIM Podpfxoyz Stlj Amfora Krmiljenje: Mazatrol Matrix Nexus Letnik: 2008 Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po našem najboljšem znanju in, kjer je bilo mogoče, od proizvajalca. Podatki so posredovani v dobri veri, vendar točnost ni zagotovljena. Ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da preverite vse ključne informacije.

Stanje: zelo dobro (rabljeno), Premer struženja nad ležiščem: 900 mm Premer struženja nad suportom: 600 mm Dolžina struženja: 3000 mm Število vrtljajev vretena: 11,2 - 560 vrt/min Nosilec orodja: Multifix D1 Skupna potrebna moč: 22 kW Prodpfxoym D H Ts Amfea Teža stroja pribl.: 5,6 t Prostorske zahteve pribl.: 5,6 x 1,8 x 1,7 m Varnostna predelava po CE standardu 2017 2011 nova vzdolžna navojna vretena, delno obnovljena menjalna omara, mazanje po notranjem načrtu.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 210 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 8 - Number of live/tool-driven stations: 3 - Driven tool speed: 8,000 [rpm] Prsdouha Nwspfx Amfea TOOL HOLDER 2 - Number of stations: 5 - Number of live/tool-driven stations: 2 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of stations: 5 BACKWORKING - Number of stations: 4 - Number of live/tool-driven stations: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Spindle hours: 18,849 [h] EQUIPMENT - CNC control: Fanuc 31i-Model A - Live tool drive on: S11, S21, S51 - Driven guide bushing - Parts removal unit - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 20 [bar] - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of live toolholders: 5 - Double drilling/milling toolholder: 1

Stanje: rabljeno, Leto izdelave: 2010, Premer struženja nad ležiščem: 316 mm Dolžina struženja: 340 mm Krmiljenje: ultimax Hurco Psdeydqpispfx Amfera Premer struženja nad vozičkom: 240 mm Obhodni premer: 402,5 mm Vretena hitrost - brezstopenjsko: 0-6000 obr/min Vrtina vretena: 45 mm Pomiki: 0-30 m/min Obratovalna napetost: 400 V Priključna moč: 14 kW Prehod sani: 185 mm Prehod vzdolžni: 340 mm Prostorske zahteve pribl.: 3,76 x 2,92 x 2,15 m Premer vpenjanja VDI: 20 mm Glavni pogonski motor: 11,5 kW Teža stroja pribl.: 3,2 t Z 12-pozicijsko revolversko glavo in podajalnikom palic.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Predpfx Aovldx Aomfoa Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.