CNC stružnica

ZPS S 80 CNC/1000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, HD wash table – HD brush wash table The wash table features an adjustable 60 bar high-pressure pump, allowing for cleaning within an enclosed workspace. Cleaning is performed using an aqueous degreaser (10 kg included in the scope of delivery) at approximately 45°C. - Viewing window with lighting - Media filtration via cartridge filter Nsdpfx Aohl Ifzodvjkw - Convenient operation via foot switch - Including rotary table Technical data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Working pressure: adjustable up to max. 60 bar - Pump output: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank capacity: 170 l - Heating capacity: 4,000 W - Total power: 8.0 kW - Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Leto izdelave: 2025, stanje: novo, VARE: AV-11621-23-Vertikal15m3 Nodpfxjibig Ts Advskw NY - Aldrig brugt! Vertikale rustfri ståltanke - 2 stk. Udvendige mål: Diameter Ø 2435 mm, Total højde 4093 mm. Cylinderhøjde: 396 mm. Vertikale rustfri ståltanke - 2 stk. AISI 316.

Leto izdelave: 1977, stanje: rabljeno, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Njdsuddglopfx Advokw Control system: Machine weight approx. 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Standard processed wheelset track gauge: 1435 mm Supported track gauges: 1435 mm, 1524 mm, 1676 mm Processable wheelset length: 1640-3000 mm Wheelset running diameter: 700-1500 mm Driving diameter: 350-1350 mm Wheel tyre width: up to 140 mm Machine overall dimensions: 8700 x 3600 x 3250 mm Total installed power: 172 kW Machine weight: 59,200 kg Feed rate speeds Lifting and centering device: 2500 mm/min Headstocks: 1320 mm/min Quills: 550 mm/min Carriages (longitudinal direction): 1300 mm/min.

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Nkedpfx Asv Uqb Nedvjw

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V Nsdpjuhhp Ssfx Advokw - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. Nkjdpfx Adsxwdygjvjw However, we can offer both used and new clamping plates and chip conveyors upon request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität Nkedpfxorx Rxts Advow DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Leto izdelave: 1981, stanje: zelo dobro (rabljeno), Obročno ploščo premer 1300 mm maksimalni premer struženja 1100 mm obseg premera struženja 460–1250 mm Nedpfxok Dz N Io Advokw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control system: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight: 10,000 kg Spindle speeds: 5-6000 rpm Gear stages: 2 Drive power – milling spindle: 45 kW Distance: milling spindle – clamping spindle: 3500 mm Spindle torque: 1250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Maximum tool weight: 50 kg Maximum tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head: yes Nodpfx Aevwgmmjdvekw Automatic tool clamping: yes Ball screw drives: yes Guideway coverings: yes Coolant system: yes High-pressure cooling system (internal cooling): yes Fully enclosed work area: yes Portal machining center with tool changing system and second table plate.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of toolholders: 2 TOOLHOLDER 1 - Number of stations: 5 TOOLHOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm Nkodpfjuha Ugsx Advew ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW WEIGHT AND DIMENSIONS - Floor space required: 2270 x 1650 mm - Machine height: 2200 mm - Machine weight: 3,500 kg MACHINE HOURS - Operating hours: 80,490 h EQUIPMENT - Control system: Fanuc - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extraction - Coolant reservoir