Prednastavljalec orodja

ZOLLER HYPERION 250

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator Fpodpfxjt Hww Do Ahmeh - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev Fodpjirax Uofx Ahmeph -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system) Fpodpfxot Rwwrs Ahmsh

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Travel paths X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Fjdpfexz Rdaox Ahmsph Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: rabljeno, Technical Details: X-axis: 120 mm Z-axis: 610 mm Diameter: - mm Y-axis measuring range (height): 0 - 610 mm Weight: 19 kg Interface: 2x RS-232C, 2x USB-A/B Overall height: 950 mm Measuring system resolution: 0.0001 mm Power consumption: 43 watts Space requirements (W x D x H): 320 x 330 x 950 mm TWO-COORDINATE HEIGHT GAUGE Equipped with two probe holders: 0-872 mm Manual adjustment speed Air bearing support Fodpfx Ahjwa A Hmemjph Interfaces: 2x RS232C and 2x USB (A+B) Reference gauge 25 mm

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Fedpeufp Svjfx Ahmeph

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. Fpedpfxjfz U S Eo Ahmoh All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: dober (rabljeno), Leto izdelave: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control system: CNC control Control: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X travel: 630 mm Y travel: 630 mm Fedpfox Hn D Dsx Ahmsph Z travel: 630 mm B-axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool stations: 80 Spindle speed: 16,000 rpm Tool changer: double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X axis: 80 m/min Rapid traverse Y axis: 80 m/min Rapid traverse Z axis: 90 m/min Spindle drive power: 40 kW Internal coolant through spindle: 50 bar Number of pallets: 2 Pallet size (LxW): 400 x 500 mm Spindle running hours: 1,000 h Operating hours: 3,000 h Max. workpiece swinging diameter: 720 mm Media interface: 5-fold Additional information: - Equipped with NC rotary table - Latest spindle technology - Ideal for high-precision machining tasks - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage monitoring Machine can be inspected under power by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: Taper: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s Fpedjv N Di Aspfx Ahmsh General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Fpodpevibc Hefx Ahmeh Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Suitable for finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM, ... Adjustable plate right with micrometer screw adjustment (axial) Adjustable plate left with micrometer screw adjustment (radial) 2 precision motor spindles for holding diamond wheels.