Stroj za površinsko brušenje

ZIERSCH & BALTRUSCH FS 50100

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display Ffjdpowd Tx Ujfx Abvow • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2015, stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices Fedpevzhf Sjfx Abvofw - Documentation

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.500 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.670 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 2.135 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose: DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: Ffedpfx Aboctutmsvow - Infinitely variable speed control - Hardened and precision ground Z-axis guideways - Turcite coatings (on mating surfaces) of cross and top slides - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and slide splash guard - Chuck guard - Switching rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine levelling pads

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Bluhm Weber Legi-Air 4050 labelling machine Further units in stock! Year of manufacture: 2016-19 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Stamping sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm, Label lengths must be accordingly limited. For certain label materials, longer or smaller labels are possible with special tampers. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 running metres, 76 mm (3") core, outer winding (optional inner winding) Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Ffodpfx Abofp A I Eevew Dimensions (L x H x W): 770 x 560 x 580 mm, Applies to systems with 250 mm stroke Controller display: Multilingual operator guidance 5.7" VGA touch display Service interval indicator Recall, edit and save label data USB port for storage device or keyboard Compressed air connection: 6 bar – compressed air must be clean, dry, and oil-free.

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 13639, Krmiljenje Heidenhain Pomik X: 1.200 mm Pomik Y: 800 mm Pomik Z: 500 mm Glavno vreteno: Hitrost: 16.000 min⁻¹ (vrt/min) Pogonska moč glavnega vretena: 17 kW Vpenjalo orodja: tip HSK63 Premer vretena pri prednjem ležaju: 70 mm Nadgrajen menjalec orodja, kapaciteta: 100 orodij Rotacijska miza (Swing round table): Premer rotacijske mize: 800 mm Zasuk osi A: -15 / +97° Rotacija osi C: 360° Maks. obremenitev mize: pribl. 1.000 kg Maks. premer orodja: 80 mm Maks. premer orodja s praznim sosednjim mestom: 125 mm Fedpfx Aboinh Rqsvofw Maks. dolžina orodja: 300 mm Maks. teža orodja: 8 kg Pomiki: Hitri pomik (X / Y / Z): 30 m/min Skupna priključna moč: 31 kVA Teža stroja: 15 t Prostorske zahteve: pribl. 6,0 x 5,0 x 3,6 m Ostala oprema: - Dokumentacija - Odvajač odrezkov - Elektronska kompenzacija toplotnih raztezkov za osi Y in Z

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial No.: 2200139 CNC: FANUC 18 iMD Location: Tabaza (Asturias) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Transversal Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle nose to table distance: 220 ~ 1035 mm Spindle nose to column distance: 865 mm Spindle Taper: BT50 Spindle speed: 30 – 6,000 rpm ZF gearbox (2 ranges): Yes Max. Tool Weight: 15 kg Max. Tool Size (Diameter x Length): 125 x 300 mm ATC Max. Tool Size: Ø125 x L250 mm Ffjdpfx Aoqwyzfebvjw Max. Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feed Rate: 1 – 10,000 mm/min Rapid Traverse (X / Y / Z): 18/18/18 m/min Motor Spindle Motor (Max. Power 30 min): 15/18.5 kW Axis Drives X, Y, Z: 5.5 / 5.5 / 5.5 kW Coolant Pump CTS: One air & two coolants – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Na voljo so 3 stroji Nakladalni sistem: ? Inventarna številka: 21214 Ffsdpfx Asqn A Rnsbvsw ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Stanje: dober (rabljeno), Leto izdelave: 2000, CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Ffodpfx Abjfrbckevsw Complete machine documentation available.

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Ffsdpfx Ael Tn Afjbvew Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.