Rezalni mlini

ZERMA GS 500/800

Stanje: pripravljen za uporabo (rabljen), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, with design as reinforced steel/welded construction and documentation. Inspection is possible. Year of manufacture unknown, comprehensively overhauled in 2022. Rbodpon Tpmusfx Ad Tot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 23.170 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, tlak vbrizgavanja: 2.005 letvica, injekcijska masa: 618 g, minimalna višina orodja: 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article number: 225 Availability: In stock Year of manufacture: 2016 Brand: KRAUSS MAFFEI Technical specifications Shot weight: 618 g Injection rate: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Injection pressure: 2005 bar Tie bar spacing: 630x630 mm Rsdpfx Asvtzkfjd Tobt Platen size: 1135x1180 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Control system: MC6 Language: German Power: 70 kW Operating hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes Heated channels: Yes Gas accumulator: Yes

Stanje: rabljeno, številka stroja/vozila: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Rbedpfek Tuxdex Ad Tet Drive motor: 30 kW

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Battenfeld Injection Moulding Machine HM 100/525 Year: 2006 Control System: Unilog B4 Technical Specifications Clamping force: 1,000 kN Mould platen size (HxV): 680 mm x 594 mm Tie bar distance: 470 mm x 420 mm Mould opening stroke: 500 mm Minimum mould height: 250 mm Maximum daylight: 750 mm Hydraulic ejector – stroke: 150 mm Ejector force forward/backward: 41.2 kN Injection unit Screw diameter: 40 mm L/D ratio: 22 Injection pressure: 2,100 bar Rjdek Rnvmepfx Ad Tsbt Shot volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 – 318 rpm Max. plasticizing rate: 30.4 g/sec Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Heating zones (barrels): 1+3 Pump motor power: 18.5 kW Oil capacity: 275 litres Dimensions and weight Total machine weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100 Rsdpoud H Dmjfx Ad Tjbt  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 1.300 kN, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Distance between tie bars (vertical): 520 mm Distance between tie bars (horizontal): 520 mm Min/Max mould height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Type: Horizontal Drive: Hydraulic Rbjdpfxewv Hrxo Ad Tjt + Apex sprue picker robot Core pullers: Yes

Stanje: rabljeno, Leto izdelave: 2017, vpenjalna sila: 250 kN, delovna prostornina: 570 cm³, tlak vbrizgavanja: 2.470 letvica, skupna masa: 14.500 kg, delovne ure: 22.900 h, premer polžastega transporterja: 55 mm, Dobavni pogoji: FCA Pegnitz Rodpfexv D Tkox Ad Tsbt Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with full-colour touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamp force: 3,000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1,050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke: 200 mm Ejector force front/rear: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2,006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater power: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Rjdpfjxdd Spox Ad Tjbt Payload < 15 kg (gripper + drives + parts) Part release on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Clamping force: 1000 kN, tie bar distance: 470 mm / 420 mm, platen dimensions X/Y/Z: 680 mm / 590 mm, opening stroke: 500 mm, daylight: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, shot weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm / 1500 mm / 2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Redpfx Ajw Duvbed Tjbt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1984, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 954594M02, skupna širina: 80 mm, skupna dolžina: 2.000 mm, skupna višina: 1.500 mm, skupna masa: 40 kg, Oprema: hladilna enota, Prodajam dvopolžični ekstruder (laboratorijski) z 2 gladilnima valjema, navodili za obratovanje, šobo za 10 cm široke trakove, vodno kopel itd. Rbedpfjxpgyysx Ad Tjt