Arburg 520S 1300-400 (2015)

Arburg 520S 1300-400

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 44.600 h, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljene dvokomponentne brizgalke s robotom Proizvajalec: ARBURG Tip: 570S2200-400/170e² Letnik: 2010 Zapiralna sila: 220 ton Razmik med stebri: 570 x 570 mm Min./maks. montažna višina: 350 mm Odpiralna pot: 1.000 mm Polž DN 1: 35 mm Maks. hodilni volumen: 154 cm³ Teža brizganca: 141 g/PS Polž DN 2: 30 mm Hodilni volumen: 59 cm³ Teža brizganca: 47 g/PS Upravljanje: SELGOCIA Oprema: 3 x jedrne izvlečne palice Vertikalna brizgalna enota 6-osni robot, proizvajalec: KUKA, tip: KR 16 Wikut, letnik: 2010 Gtodpfx Afsu E E H Soqjt Transportni trak Zaščitna ograja

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Godpfx Afsw T Sc Noqett Admissible frequency variation: +/- 3% Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: rabljeno, Leto izdelave: 2004, Kompaktna polavtomatska čelilna spajalna linija, sestavljena iz: - Rezkalnik PJ 150/500 - Prenosne mize za ročni prenos - Enokanalne stiskalnice PJ 7/6100 li Gtsdpfx Afow Nbaceqjt Rezkalnik: 2 paketa/min Stiskalnica: 2 cikla/min Vhodna dolžina: 150 – 700 mm Končna dolžina: maks. 6.100 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5 m straightening beam. This allows you to process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated via the proven Stierli stroke fine adjustment control. This makes it very easy to use and enables fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyor, NC control, laser measurement, etc. Gedpfjufhzvjx Afqett (Note: The photo does not show the actual machine.)

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Gtedpepumdcsfx Afqjt Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Gedow T Sd Tepfx Afqjtt Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm Gtsdpfxsuhbv Ss Afqet ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: - Year of manufacture: 2011 - Clamping force: 1500 kN Gedpfew E Itisx Afqstt - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Godpfx Afsvca Izeqett Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Gsdpfx Afswtgcxjqett Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used