Koordinatni merilni stroj

Zeiss O-INSPECT 442

Zeiss coordinate measuring machine
Type: O-INSPECT 442
Machine designation: Coordinate measuring machine
Machine type: O-INSPECT 442

The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for simultaneous display of actual condition, nominal profile, and deviations, making measurement results very easy to recognize and interpret.

General data:
Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm
Measuring range: X 400 mm, Y 400 mm, Z 200 mm
Weight:
CMM: 800 kg
Workpiece, max.: 20 kg
Noise level of the CMM: < 70 dBA

Electrical data:
Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %)
Connection: 1 / N / PE
Frequency: 50 to 60 Hz (± 3.5 %)
Power consumption: max. 1500 VA
Fuses:
At 230 V or 240 V: 16 A
At 100 V or 125 V: 15 A

Rapid traverse speeds:
Creep mode: SLOW function 0 to 5 mm/s
Setup mode: 0 to 70 mm/s
Iodpow Titlsfx Ah Doih
Automatic measurement mode
Axis (X,Y): max. 200 mm/s
Axis (Z): max. 50 mm/s
Axis (3D): max. 287 mm/s

Ambient conditions:
For flawless operation of the coordinate measuring machine, the following conditions must be met.
Ambient temperature for operational readiness: +17˚C to +35˚C
Relative humidity: 40% to 70% (non-condensing)
Room temperature for measurement operation: 20˚C ±1 K
Altitude above sea level:
100-125 V: max. 3000 m ASL
230-240 V: max. 2000 m ASL

Probe system:
Probe system: CFS
Probe types:
Probe type: CFS 2mm
Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm
Measurable surface tilt relative to beam direction: 90 ± 15°
Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm
Measurable surface tilt relative to beam direction: 90 ± 30°
Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm
Measurable surface tilt relative to beam direction: 90 ± 20°
The values for surface angles are limit values and depend on the reflection properties of the workpiece surface.

Rotary table:
Weight and resolution
Rotary table weight: 7 kg
Resolution: 0.15’’
Dynamics:
Angular velocity, max.: 50˚/s
Rotational speed: 8.3 min-1

Scope of delivery:
In the standard version, the coordinate measuring machine type O-INSPECT is supplied with the following components:

Coordinate measuring machine (CMM)
Controller (integrated)
Control panel
PC with peripherals
Software - CALYPSO 5.2
Documentation
Probe system
Reference stylus
Calibration standard
Calibration template

Scope of delivery: (Zeiss coordinate measuring machine as pictured)
Condition: used
(Changes and errors in the technical data and information are subject to correction!)
Please ask about transport options before purchase.

Further questions? We would be glad to answer them for you by phone.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.