Koordinatni merilni stroj

Zeiss Contura - 7.10.6

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.797 mm, skupna masa: 1.570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating probe head and the VAST XXT TL3 sensor, enabling scanning speeds of up to 150 points/second. Ideally suited for precision measurements with a maximum workpiece weight of 730 kg. Consider the option to purchase this ZEISS Contura 7/10/6 RDS CMM. Contact us for further information about this unit. Additional information: • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system • Sensor system: Hjdpjx D Ngfsfx Abxjnn • Swivel head: Tilt ±180°, rotation in 2.5° increments • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus assembly weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (according to ISO 10360): • Length measurement error (E₀): 1.7 + L/350 µm (at 18-22°C) • Probing error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm • Control: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB Performance: • Drive system: Motorized CNC • Traverse speed (axes): 0-70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s Utilities: • Power supply: 100-240V AC (±10%), 50-60 Hz • Max. power consumption: 800 VA • Typical power consumption: 200 W • Compressed air: 6-8 bar, pre-filtered, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min Ambient conditions: • Operating temperature: 18°C-22°C • Relative humidity: 30-60% (non-condensing) Compliance & Certifications: • Conforms to EC Machinery Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited: ISO/IEC 17025:2005 Dimensions Machine depth: 1975 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref.-št.: 10615 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2011 Tip krmiljenja: CNC-krmiljenje Krmiljenje: Heidenhain ITNC 530 Hsdpfx Abjy H Epwexsnn Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 128/XXXX X-hod: 1800 mm Y-hod: 2100 mm Z-hod: 1250 mm Zasukalni razpon: -30 / +180 ° Obremenitev mize: 10000 kg Največji premer vrtljive mize: 1700 Ø Območje vrt. hitrosti mize: 12 min/-1 Vpenjalo orodja: HSK 63 Število mest za orodje v magazinu: 60 Vretenaste hitrosti – brezstopenjsko: 24.000 U/min Pribl. teža stroja: 41 t Vreteno: 24000 U/min Pogon za podajalno os A, C: 30 min/-1 Horizontalna glava: 130-1.380 mm Vertikalna glava: 230-1.480 mm Dodatne informacije: Stroj si je mogoče ogledati pod napetostjo.

Leto izdelave: 2023, stanje: novo, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel + aluminum Hsdpoh Rabnjfx Abxsnn Overall dimensions: 3350 x 2200 x 1300 mm Working area: 3100 x 1520 x 140 mm XY Axis Drive, dual-sided gantry: 4 Nm stepper motors with gear ratios, precision class 8 rack and pinion Z Axis Drive: stepper motor with ball screw Travel speed: up to 25 m/min Z-Axis Control System: THC MyPlasm system Collision system protecting the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1200 kg INCLUDED IN THE PACKAGE: - Control panel - Water table - Replaceable grate - Control software (available in German, English, and Polish) - CE declaration of conformity - Technical Documentation (DTR) - Warranty Optional: Selection of a suitable Hypertherm plasma source tailored to individual company requirements.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm Hnjdpfxodv I Abs Abxon CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Hodpfx Aedpak Rebxsnn Probe changer Rotary table, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Hodpfxsxf Hqqo Abxonn Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC530, največja hitrost vretena: 36.000 obr/min, delovne ure vretena: 4.651 h, nos vretena: HSK 50, število vreten: 15, Oprema: CE označba, dokumentacija / priročnik, VERTIKALNI OBDELOVALNI CENTER MIKRON MODEL HSM 800 Hnsdpew U T Szsfx Abxon POMIK OSI X 800 mm POMIK OSI Y 600 mm POMIK OSI Z 500 mm VRETENO HSK E 50 HITROST VRTENJA VRETENA 36.000 OBR/MIN TIPALO ZA DELEC LASERSKI MERILNIK NAVODILA ZA UPORABO IN VZDRŽEVANJE CE CERTIFIKAT CNC HEIDENHAIN iTNC 530 ODDALJENI ROČNI KOLESNIK MOTORJI IN POGONI SIEMENS MERILNI SISTEM Z OPTIČNIMI VLADICAMI HEIDENHAIN SKUPNI DELOVNI ČAS: 6447 UR URE VRETENA: 4651

Stanje: rabljeno, Laser ACSYS Lasertechnik GmbH PIRANHA II Multi FL20s Hnedpfsu E U Tnsx Abxon

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 400 mm, merilno območje os Z: 200 mm, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, osvetlitev, Year of manufacture: 2012 Tactile probe: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C: 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP: 2.7 [μm] Single stylus probing deviation, form MPE according to ISO 10360-5:2010 PFTU: 1.9 [μm] Hnsdpjuq Nfhofx Abxjn Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 Probing deviation MPE according to ISO 10360-7:2011 PF2D 5): 1.7 [μm] Probing deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5): 1.2 [μm] Available services: Delivery, commissioning

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm Hnedpstqqmhofx Abxsn y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system