Upogibni stroj

YAWEI PBH220/3100-7C

Leto izdelave: 2020, stanje: novo, Transport systems Rcsdefz U S Ejpfx Anpsh Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: novo, Leto izdelave: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) Rodpfslht N Isx Anpsch - Hardened rolls - Cone rolling - Swing-out top roll - Centralized lubrication system - Brake motor - Emergency stop - Documentation - 400V

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, številka stroja/vozila: 34435, hod: 200 mm, globina grla: 405 mm, obratovalna hitrost: 21 mm/s, hitrost vzvratne vožnje: 180 mm/s, višina mize: 970 mm, kapaciteta rezervoarja za olje: 350 l, skupna masa: 11.500 kg, skupna dolžina: 4.945 mm, skupna širina: 2.000 mm, skupna višina: 2.995 mm, moč: 37 kW (50,31 KM), vhodna napetost: 400 V, vhodni tok: 63 A, vhodna frekvenca: 50 Hz, stiskalna sila: 170 t, razmak između stupova: 2.600 mm, tabela razdalj do bata: 400 mm, dolžina plošče bata: 3.050 mm, dolžina mize: 3.050 mm, širina mize: 120 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Hidravlična upogljalna stiskalnica LVD EASYFORM 170/30 Touch-B Leto proizvodnje: 2012 Serijska številka: 34435 Tehnične specifikacije: Moč: 1700 kN Dolžina upogiba: 3000 mm Razdalja med stebri: 2600 mm Hod: 200 mm Razdalja med mizo in batom: 400 mm Odprtina: 405 mm Krmilnik: Turbo PP5400 Hitrost približevanja: 128 mm/s Delovna hitrost: 22 mm/s Hitrost vračanja: 200 mm/s Teža: 11500 kg Motor: 37 kW Volumen olja: 350 l Teža: 11500 kg Dolžina x Širina x Višina: 4945 x 2200 x 2995 mm NADZORNA PLOŠČA COMMAND CONTROL TOUCH-B – • Miza PP8170, os V • EFL 90 • zgornja vpenjalna priprava PP3090 – Wila • hidravlična vpenjalna priprava PP3100 • hidravlična vpenjalna priprava PP3160 za upogljalne matrice V Rcsdszk H A Dspfx Anpjh • zadnji merilnik X R Z1 Z2 X' • varnost; CE PP3580 – lasersko varovanje • 2 nosilca spredaj

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration Rsdpfxetwb U Aj Anpjch - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you the highest precision and efficiency with a capacity of 3050 mm bending length and 175 tons. Benefit from our comprehensive all-in-one service: we take care of transport, installation, commissioning, and offer you a one-year warranty as well as fast and reliable service. Visit us and see for yourself the quality and versatility of this high-class machine. Standard equipment Rcjdpfetr Dk Esx Anpjh Capacity (length - tonnage): 3050 mm – 175 t Installation height: 530 mm Throat depth: 450 mm Stroke: 265 mm Servo drive Y1, Y2, X – 3 axes Control unit – DT 15 Manual F. AKAS FPSC safety system CE-certified Fiessler Akas Servo-motorized back gauge & linear guide & ball screw system Manual crowning European-style tool clamping Adjustable front support arms Options - DELEM 69S control unit (3D controller) - Motorized crowning - 6-axis (X=650 mm, Y1, Y2, X, R, Z1, Z2 – 6-axis controlled press brake) - European lower tool M.460R.85 - European upper tool P135.75.R08

Stanje: novo, Leto izdelave: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven), * Locks for secure door opening and closing, * Maximum operating temperature: 230°C. Powder Coating Booth TQ0906 Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3,200 m3/h, * Hermetic lamp: 1 pc. * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality machinery offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products have a WE certificate. Rcjdpfxofgnyto Anpeh We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Leto izdelave: 1995, stanje: rabljeno, Komplette Wasserlackieranlage mit 865 m langer Förderkette, Schienen, Sames-Reciprocatoren mit Rotationsbechern, Generatoren, Lackierpumpen, Schleifbänken und Zubehör. Rcedsit Rrvepfx Anpeh

Leto izdelave: 2020, stanje: novo, 7" Touch Panel The large color touch panel is visually appealing and offers comfortable, intuitive operation. All important parameters can be set via the panel. Storage for 20 Programs with 10 Events Each Up to 20 programs can be stored, each with up to 10 consecutive time-temperature events arranged along the heating curve. This is especially necessary for more demanding processes. Gas/Oil Consumption Data Consumption is calculated based on burner settings. This feature enables you to estimate the cost of a particular cycle, schedule consumption, and oversee personnel. Two-Channel Recorder with USB Cycle Parameters Every oven is equipped with a recorder that logs all ignition parameters—including two temperature channels—onto a USB stick, similar to an aircraft black box. The system also allows for the analysis of monthly/daily reporting, including media consumption and performance. Each heating start that opens the door is intended to be recreated for several years. Such a dedicated option is not offered by any other manufacturer. This system was developed from the ground up by our programmers. Rcedpfofy Txyex Anpoh Automatic Flue Gas Extraction Chimney The chimney can be programmed to open a few minutes before the end of the firing process in order to vent the chamber. It can be remotely operated from the control panel and does not require mechanical action as with most conventional systems. Minute-by-Minute Remaining Time Prediction The cycle has started—how long will it take to finish? By calculating the heating dynamics, the system counts and displays the remaining duration. Simple Door Mechanism Simply pull the door to open it. The lock features adjustable pressure on the door. To close, just push—it latches the door automatically and pulls it securely closed. To minimize heat loss into the workshop when opening the door, a hood is installed above the door to redirect some of the heat. The MTS system is designed to precisely detect the actual chamber temperature. Standard measurement is often based on a single sensor, which can be inaccurate. MTS is a multi-sensor setup located at the extremities of the chamber. The multi-zone heating system ensures an unrivaled firing quality.

Stanje: zelo dobro (rabljeno), Tehnični podatki: 2 valja, hidravlično nastavljiva 2 podpiralna valja 3 pogonjena valja NC-nadzor Premer gredi: 80 mm Dolžina gredi: 160 mm Premer valja: 224 mm Moč motorja: 5,5 kW Mobilna upravljalna konzola Dimenzije (dolžina x širina x višina): približno 1240 x 1460 x 960 mm Teža: približno 1,4 tone Stanje: zelo dobro stanje, malo uporabljena Rsdpfx Aezv Ernsnpsch Prodajalec ne odgovarja za tipkarske ali napake pri prenosu podatkov. Stroj je glede videza, tehnike in obrabe primeren starosti; rabljeni stroji se prodajajo brez kakršnih koli garancij.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, hod: 365 mm, skupna masa: 23.000 kg, skupna dolžina: 5.300 mm, skupna širina: 1.900 mm, moč: 37 kW (50,31 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 320 t, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, DURMA AD-R 40320 CNC-hidravlična upogljalna stiskalnica – leto izdelave 2018 Naprodaj je DURMA AD-R 40320 CNC-hidravlična upogljalna stiskalnica s 320 t silo stiskanja in 4.050 mm dolžino upogiba. Stroj je izdelan leta 2018, ima razmeroma malo delovnih ur in je v zelo dobrem, vzdrževanem stanju. Tehnični podatki: • Sila stiskanja: 320 t • Dolžina upogiba: 4.050 mm Rjdpfx Aozt A Axsnpoch • Hod: približno 365 mm • Leto izdelave: 2018 • Nadzorovana s sistemom CNC • Stanje: zelo dobro / vzdrževano • Malo delovnih ur Stroj si lahko ogledate po predhodnem dogovoru.