Hitro tiskanje v dveh stolpcih

YAMADA DOBY NXT-60

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Duodpjx Hgl Hsfx Anxsu Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm Dusdpfxsu Elkqo Anxju TOOL HOLDER 1 - Number of stations: 9 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm FRONT UNIT - Number of stations: 3 BACKWORKING - Number of stations: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 73,252 h - Spindle hours: 50,900 h ACCESSORIES - Control: Fanuc 18iT - Driven guide bush - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: IEMCA CH 220/32L - Fire extinguishing system * NB: Functionality not guaranteed. Should be checked by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Djdpfjdkdi Tjx Anxsuu Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° Dujdpfx Aedfgg Ionxou C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Dusdpfx Aocxxx Renxeu Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Leto izdelave: 2013, obratovalne ure: 84.545 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 17.500 kg Glavni pogon Prebijalna sila: 220 kN TRUMPF TRUPUNCH 5000 S10 je bil izdelan leta 2013. Opremljen je s krmilnim sistemom Siemens Sinumerik 840D, delovno območje meri 3050x1550 mm, prebijalna sila je 220 kN. Stroj lahko obdeluje pločevine do 280 kg in debeline do 8 mm; vključuje linearni ATC za 21 orodij in dodatne možnosti, kot sta MULTITOOL in GRAVIRANJE. Stroj je redno vzdrževan in v dobrem stanju. Za več informacij o stroju nas kontaktirajte. Dedpfxex D Nwwo Anxouu Vrste uporabe Prebijanje

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center Dsdoxmaguopfx Anxouu MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Vrsta raster elektronskega mikroskopa Zeiss XB 350 Oprema in dodatki • brez FIB stebra • programska oprema SmartSEM in SmartFIB • GIS s Pt-prekurzorjem • integrirani plazemski čistilec • EDX Oxford Xplore 30 (vklj. vmesnik in programska oprema) • avtomatska 200 mm prehodna komora • električni prehod (2 x 15 kanalov) Dedpow Rdvvofx Anxjuu • obtokovni hladilnik • Quiet Mode vakuumski rezervoar • ... kot tudi miza, zaslon, upravljalne konzole (lastniška tipkovnica in joystick Zeiss) ter različni nosilci vzorcev Prva uporaba: avgust 2024 Lokacija: Mainz Razpoložljivost: po dogovoru takoj na voljo. Naprava je še vedno v uporabi in si jo lahko ogledate ter jo testirate. Naprava je brez napak ali poškodb in je v celoti funkcionalna. Dodatne informacije na zahtevo!

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dujdsifn N Njpfx Anxou Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Duedpfofx Hv Hox Anxju Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.