Visokotlačni čistilec

WOMA Ecomaster MK3 P16 2800 bar (20 l/min)

Stanje: rabljeno, Mounting: MK 4 Cedpfxjb N Ezro Afdogw

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: bež, moč: 513 kW (697,49 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 408 kW (554,72 KM), nazivna (navidezna) moč: 510 kVA, neprekinjena moč: 368 kW (500,34 KM), skupna dolžina: 4.460 mm, skupna širina: 1.606 mm, skupna višina: 2.493 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Doosan, vrsta hlajenja: voda,

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Cgedpeirax Usfx Afdew -Weight: 1500 kg

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Cgsdeibwarspfx Afdow Dvižna višina: 214 metrov (21,4 bar) Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Pogonska moč: 30 kW Hitrost vrtenja: 2935 obr/min ! Cena na kos !

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Cgsdpfx Aoh D Svnofdjw Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material 1x for ? - Foot switch with emergency stop

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 735,5 kW (1.000,00 KM), Leto izdelave: 2015, Naftni vrtalni stroj National 80 UE 1000 KM Cgodpfxjx Nc Dds Afdow Leto izdelave: 2015 Popolnoma delujoč

Stanje: zelo dobro (rabljeno), Dobro vzdrževan Hammelmann HDP 42, 970 barov in 16,5 litra, letnik 2012. Cgsdpfx Aexgvhnsfdow

Stanje: rabljeno, Leto izdelave: 1968, Technical details: Csdjvpfzyopfx Afdjgw Drilling capacity in steel (diameter): 40 mm Throat depth: 380 mm Drill stroke: 240 mm Spindle taper: MT 5 Spindle speed: n.a. rpm Feed rate: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 (manual + automatic) mm/rev Max. distance spindle/table: 200 – 800 mm Table clamping surface: 540 x 730 mm Table swivelling: 360° Drilling table adjustment: 600 mm (manual) Column diameter: Ø 220 mm Base plate clamping surface: W: 510 x L: 510 mm Total power requirement: 4.0 kW Machine weight approx.: 1300 kg Machine dimensions approx. L x W x H: 1.2 x 0.95 x 2.35 m Operation via control panel and/or foot switch Mechanical thread cutting Incl. machine vice

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 14 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, skupna širina: 1.500 mm, skupna dolžina: 3.000 mm, skupna višina: 2.500 mm, pritisk: 2.800 letvica, obratovalni tlak: 2.800 letvica, gorivo: dizel, skupna masa: 3.000 kg, vrtljajska hitrost (min.): 700 obr/min, največja hitrost vrtenja: 1.500 obr/min, dolžina visokotlačne cevi: 60.000 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Package of 5 UHP waterjet machines with extensive spare parts and accessories as follows: 1 x high-pressure waterblast system with Deutz-MWM V-8 diesel engine Infinitely variable pressure adjustment from 0–1400 bar and 0–2800 bar, dump system, with interchangeable plunger kit as follows: 1400 bar at 99 l/min and 2800 bar at 46 l/min. The high-pressure head with bushings and valves remains the same for both pressure stages, 1400 and 2800 bar. Switching between 1400 and 2800 bar is performed simply by changing the plungers. This unit was built in 2013 and held as a backup machine, but only used once for 14 hours at 2800 bar for a heat exchanger cleaning project. The UHP machine is mounted on a galvanized steel frame. The Deutz-MWM engine was purchased as a used unit with approx. 3,000 operating hours and fitted in 2013 with a new Jetech UHDW high-pressure waterjet pump. Additionally, a large selection of accessories and spare parts is included, such as dump guns & foot valves, swivels, rotary couplings, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, specialized tools, and more. An identical UHP waterjet unit is also available, but fitted with a Scania V-8 engine and 850 operating hours at max. 1400 bar / 99 l/min. This unit is also equipped with a plunger change kit for both 1400 bar/99 l/min and 2800 bar/46 l/min. The system is installed in a 20-foot container, equipped with an 800 l diesel tank, a workbench, and vise. Furthermore, there are 3 more high-pressure waterjet units, each rated at 110 kW, of which 2 are equipped with interchangeable plunger kits for 1400 and 2800 bar. The third is a Kamat K11000 unit with 2800 bar operating pressure. Cgodpfx Afoxc E Trsdew Also available: a hydraulic heat exchanger cleaning system with rotating lance, mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for the entire package of all machines and accessories. For export only.

Stanje: novo, Pressure 1.5 kN Stroke 40 mm Cgodofv Av Dspfx Afdjw Throat Depth 70 mm Working Height from/to 75 - 170 mm Table Surface 115 x 70 mm Machine Weight approx. 11 kg Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Presses HZ 150 The force is transmitted via a rack-and-pinion mechanism. These presses are used where a constant pressure is required during the operation. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, T-slot machined centrally according to DIN 650, T-slot nuts fit precisely.