Hidravlična stiskalnica

WMW HydraulischePresse VEB Zeulenroda PYE10N

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Ffsdpfx Abjfxyhfevew Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 1990, obratovalne ure: 0 h, stanje: rabljeno, številka stroja/vozila: 2904, Oshkosh A/S32 R11 Tanker, 6,000 gallon (approx. 22,712 liters) capacity, equipped with a Cummins 8.3-liter 6-cylinder turbo diesel engine. Pump rate: 600 GPM with overwing and underwing refueling. Tank, piping, and filter separators have been flushed; the vehicle is immediately operational. Price quoted is for the current condition; with German roadworthiness certificate (TÜV) and registration, the vehicle costs €30,000 net. Multiple units are available with varying mileages. Please always schedule an appointment for viewing. Ffsdohrf Ibspfx Abvow

Leto izdelave: 1990, stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. Fsdpsh Et E Njfx Abvofw For further details, please refer to the pictures.

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 190454, Ponudba 25290 Tehnični podatki: Ffjdpow Sthdjfx Abvsw - maks. delovna širina: 3040 mm - maks. debelina materiala pri trdnosti 40 kg/mm²: 2 mm - nastavitev kota upogibanja: 6 – 135° - največja odprtina / hod zgornje grede: 250 mm - nastavitev višine - upogibna greda: 50 mm - spodnja greda: 50 mm - pogon zgornje grede: 400 V / 0,37 kW - pogon upogibne grede: 400 V / 0,75 kW - ročni zadnji omejevalnik - deljena gosja upogibna letvica - potrebni prostor pribl. Š 4000 x V 1400 x G 1200 mm - teža pribl. 3500 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Fodpfxjpugwio Abvjfw A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Ffodpopgmufjfx Abvew Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: novo, Leto izdelave: 2025, Vstopni model ploščatega vlakenskega laserja za rezanje kovin Nizki stroški laserskega rezanja in enostavna uporaba Modularna miza za rezalni stroj z ojačitvami prihrani čas pri razstavljanju ter izboljša priročnost in togost. Posebna šoba za vlakenski laser in rezalni proces omogočata hitrejše rezanje ogljikovega jekla s kisikom, varčnejše rezanje nerjavečega jekla z dušikom pri nizkem pritisku ter boljšo kakovost rezanja ogljikovega jekla z zrakom. Vlakenske laserske glave zaznavajo izbokline in s tem učinkovito zmanjšujejo stopnjo poškodb ter znižujejo stroške vzdrževanja laserskega rezalnika. Uporabni material: kovina Stanje: novo Fsdjhv U Swspfx Abvsfw Tip laserja: vlakenski laser Moč laserja: 1000W, 1500W, 2000W, 3000W Delovno območje: 4000*1524 mm Hitrost rezanja: 0–100 m/min Natančnost pozicioniranja: ±0,05 mm Ponavljajoča natančnost pozicioniranja: ±0,03 mm Podprti grafični formati: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC: da Način hlajenja: vodno hlajenje

Leto izdelave: 1979, stanje: rabljeno, Outreach: 22/29 mm Ffjdozif Sopfx Abvsw Drive motor: at 380 V approx. 0.55 kW Space requirement: 450 x 500 x 560 mm Weight: approx. 6.5 kg Pressing force: 30 kN

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Fsdpfsr Sxq Rex Abvofw Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, vrsta aktuacije: hidravlični, delovna širina: 60 mm, hod: 105 mm, globina grla: 200 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 100 mm/s, višina mize: 970 mm, zadnji prislon: 345 mm, skupna masa: 2.800 kg, skupna dolžina: 1.420 mm, skupna širina: 1.100 mm, skupna višina: 1.800 mm, Upogibni stroj Znamka: PROMECAM Tip: PPH25.12B Kapaciteta: 1200 x 25T Ffjdjxwukcepfx Abvow Razdalja med stojali: 1020 mm Globina grla: 200 mm