Kot vpenjanja

WMW AW1000x800x640

Stanje: dober (rabljeno), Spindle diameter: 80 mm Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Hedpfx Adjphl Ecekoni Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, potovalna razdalja osi X: 800 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, Proizvodni paket opremljen z: 600 l filtrirnim sistemom IKZ obrazec AD Rotacijski zaslon Merilna sonda MP10 Nova vretena je leta 2023 stala 13.500 EUR X os: 800 mm Y os: 700 mm Z os: 600 mm A os: 90° Hnjdpfx Adew Rdl Djkei B os: 360° Dolžina mize: 900 mm Širina mize: 630 mm Nosilnost mize: 800 kg Pomik X osi: 30.000 mm/min Pomik Y osi: 30.000 mm/min Pomik Z osi: 30.000 mm/min Vpenjalni sistem orodja: 40 ISO/BT/MK Moč vretena: 15 kW Število obratov: 12.000 rpm Menjalnik orodij: 30 pozicij IKZ: 20 bar Število krmiljenih osi: 3+2 Transporter ostružkov: Da Hladilni sistem: Da Dolžina: 6.000 mm Širina: 4.000 mm Višina: 2.700 mm Teža: 9.000 kg

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 - 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total power consumption: 35 KVA Machine weight: approx. 10 t Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault. Hnodpfxjtv H Uce Adkei

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), used T-slot angle plate Hnjdpfx Adegwxmxjksi Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots used, in good condition

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 2500 mm / 900 mm / 800 mm, Speed: 18,000 rpm, Spindle power: 35 kW, Max. table load: 3,000 kg, Tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500 mm / 3,000 mm / 3,000 mm, Weight: approx. 20,000 kg, Control: Siemens Sinumerik 840D, Operating hours: 55,730 h, Spindle hours: 18,696 h. Z-axis brake defective, roller shutter in the machine enclosure defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. On-site inspection possible. Hnodovamqdjpfx Adksi

Stanje: rabljeno, Leto izdelave: 1999, Table length 850 mm Table width 550 mm Amperage 70 A Control CNC MITSUBISHI 32bit Travels (X, Y, Z) 550 / 850 / 450 mm Machine weight approx. 6 t Space requirements approx. 2.4 x 2.65 x 2.68 m Electrical Discharge Machine (EDM) / Die-Sinking EDM The machine is in very good condition. Equipment / Accessories: - Y-axis travel during electrode change and loading position: 1180 mm - Integrated C-axis, work head with adjustable speed: 10/20 rpm - Integrated C-axis / work head measuring resolution: 0.001 mm Hnjdpfju Dbtljx Adksi - Load capacity without changer: 50 kg - Load capacity with changer: 10 kg - Maximum head load: 200 kg - Maximum distance between tool carrier plate and work table: 585 mm - Minimum distance between tool carrier plate and work table: 125 mm - Work tank: - Lift tank dimensions (W x D x H): 800 x 1100 x 480 mm - Programmable/automatic dielectric fluid height: 440 mm - Filter cartridge type: Cartridges integrated - Electrode changing system / pick-up disc magazine slots: 20 - Electrode weight / single electrode: 15 kg - Changer total capacity: 60 kg - Generator FP 70 amp, multipulse - Electrode changer: 20-position pick-up linear changer - Electric hand pendant - Integrated CO₂ fire extinguishing system / dielectric cartridge filter system

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), A CNC 4-axis universal bed milling machine Maho is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle taper: SK50, main spindle speed: 4000rpm, power: 22kW. Tool stations: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16,000kg, control: Philips CNC 232. An on-site inspection is possible. Hodpfx Aev Ubqnodkjni

Stanje: dober (rabljeno), Leto izdelave: 1991, x-axis travel 4000 mm y-axis travel 2500 mm z-axis travel 1200 mm Hnjdpfovwgmgjx Adksi Control system: FIDIA M30 Spindle power: 37 kW Spindle speed: 4500 rpm Column clearance: 2300 mm Distance spindle to clamping surface: 1250 mm Tool holder: ISO SK-50 Table dimensions (longitudinal): 3000 mm Table dimensions (cross): 1500 mm The 5-axis portal milling machine Ingersoll-Bohle is in good condition and can be inspected by appointment with the seller. Accessories: - High-frequency spindle 3.8 kW with 25,000 rpm Description: - Infinitely adjustable angled milling head (spindle speed 4500 rpm)

Stanje: pripravljen za uporabo (rabljen), Slottere românești MH500, M 320 și M 200 Hsdpfxotz S Hcj Adksni Cursă 500 mm, 320 mm și 200 mm

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 725mm/460mm/460mm, spindle speed: 10,000 rpm, tool holder: SK40, tool magazine: 24 stations, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Overall dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ballscrew and rolling bearing. Chip conveyor included. Documentation available. Inspection on site possible. Hnjdpfx Ajttmpledksi