Točkalnik za čelno obdelavo

WMW ZERBST DP 4000x8000

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: nepreverjeno, Tukaj vam ponujamo vrtljivo mizo znamke Parkson. Model je PAR-251 R Premer vrtljive mize je približno 250 mm. Kontaktirajte nas za neobvezujočo ponudbo. Kdjdpfjxtu Efox Agfet

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Kodpfewrzkzox Agfjdt Technical data, accessories and machine description are not binding.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Kjdpoizwv Nsfx Agfjdt Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: dober (rabljeno), Leto izdelave: 1989, premer struženja nad prečnim suportom: 820 mm, izvrtina vretena: 128 mm, premer struženja nad ležiščem sani: 515 mm, stružna dolžina: 2.000 mm, skupna dolžina: 6.000 mm, skupna širina: 1.900 mm, skupna višina: 1.800 mm, največja hitrost vretena: 1.400 obr/min, Stružnica z vretenom v sredini VDF BOEHRINGER - DUE 800 ŠTEVILKA: 9760 Proizvajalec: VDF BOEHRINGER Tip: DUE 800 Letnik izdelave: 1989 Digitalni prikazovalnik Heidenhain ND780, 3 osi Kedpozpwwpefx Agfsdt 3-čeljustna glava, premer 400 mm 4-čeljustna glava, premer 800 mm Zaprt nosilec, približno 400 mm Nosilec tipa C, približno 400 mm Dolžina obdelave: 2000 mm Premer obdelave na postelji: 820 mm Premer obdelave na suportu: 515 mm Premer vretena: 128 mm Moč vretena: 30 kW Širina postelje: 560 mm Število vrtljajev: 1400 vrt/min Premer konusa: 125 mm Maksimalna teža obdelovanca: 5000 kg Dolžina: 6000 mm Širina: 1900 mm Višina: 1800 mm Teža: 6700 kg Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljših močeh in znanju ter, kolikor je bilo mogoče, pridobili od proizvajalca. Informacije so podane v dobri veri, vendar ne moremo zagotoviti njihove točnosti. Posledično ne predstavljajo nobenega obvezujočega zagotovila ali pogodbenih pogojev. Priporočamo vam, da preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Kodpozb Evlefx Agfjdt Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: rabljeno, Leto izdelave: 1952, Werkstücklänge 5000 mm Schwingdurchmesser 1100 mm Einspannlänge 6000 mm Schleifdurchmesser 1100 mm Schleifscheibendurchmesser 1300 mm Werkstückgewicht 2500 kg Hauptantriebsmotor 22 kW Kurbelwellenlagerdurchmesser 275 mm Lünette 100-250 mm Werkzeug-Drehzahlen 400/500 U/min Werkstückdrehzahlen 20-40 U/min Maschinengewicht ca. 30 t 13 Schleifen Lünetten Aufspanndorne Aufnahmeflansche Spannmittel Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Kedpjyt Rxvsfx Agfsdt Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2011, Rezkalni stroj Quaser MV 184, letnik 2011. Stroj je kompleten, naprodaj tako, kot je prikazano na slikah. Opremljen s hidravličnimi primeži, agregatom, transporterjem odrezkov, tračnim filtrom ter odsesovalno napravo. Ksdpfxeyfm T Hj Agfjdt

Stanje: dober (rabljeno), Deli, prikazani z roko, niso vključeni. Kdjdpoyb R Erofx Agfjt

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Kdedpfsxx A D Tex Agfot Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps Kdjdpfei Eg Nkex Agfst - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg