Hidravlične vpenjalne glave

WMW Niles TGL30-2312 Ø 160 mm

Stanje: dober (rabljeno), LNS ECO LOAD bar feeder Fpsdpfx Afslg Aq Aolob

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Fedpfx Aou Ix D Aeflspb Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake Fpodpfsm Rlb Nox Aflob • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: rabljeno, Leto izdelave: 1988, Tailstock yes To hobbyists yes Condition not checked Machine weight approx. 3.8 t Fpedpfxeu Su I Ej Afljb

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 3-201065, Maximum material clearance in feed tube: 65 mm for material lengths up to: 3000 mm Feed force steplessly adjustable up to max.: 550 N Fjdpfsdlm Dhsx Aflepb Loading time approx.: 30 s Electrical connection/power requirement: 380 V/1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Stanje: rabljeno, barva: rumena, prva registracija: 01/1995, * Manufacturer: HYSTER * Model: H2.50XM * Serial No.: D177B22181S * Attachment: S/S 2.00-1.50 1067 mm * Year of manufacture: 1995 * Drive: Diesel * Operating hours: 18,151.8 h * Unladen weight: 4,265 kg * Back tilt: 6 degrees * Tyre size: 7.0 x 12 (front), 6.0 x 9 (rear) * Tyre pressure: 0 (front / rear) * Track width: 1,125 mm * Rated capacity with upright mast and specified attachment * Lift height: 5,550 mm * Load capacity: Fodpfxsi Tfaps Aflepb - 2,040 kg at 500 mm load center - 1,860 kg at 600 mm load center - 1,710 kg at 700 mm load center * Subject to change, prior sale, and errors excepted.

Stanje: dober (rabljeno), Leto izdelave: 1985, CNC Lathe Manufacturer: GILDEMEISTER Type: N.E.F. 1020 Year: 1985 Control: EPL 2 Swing diameter over bed: 1020 mm Fpsdpoqc Ul Ajfx Afljb Swing diameter over cross slide: 600 mm Turning length: 3000 mm Spindle speeds: 5 - 1120 rpm Motor power: 30 kW Spindle bore: 128 mm Tool turret: Parat size 4 with 10 tool holders Faceplate: 900 mm, steady rest, drilling support, chip conveyor Complete machine documentation and parameters available. Machine is dismantled and in storage. Total weight: approx. 12,000 kg. For further technical data, see datasheets.

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 19177, Ponudba 25487 Tehnični podatki: Fpedpfjx Hgv Esx Afljb - Vrtalna zmogljivost v jeklu ST 60: 28 mm - Premer vrtanja v jeklu ST 60: 32 mm - Naprava za rezanje navojev - Vpetje vretena: MK 3 - podaljšano vreteno - Hod vretena: 180 mm - Število vrtljajev vretena brezstopenjsko nastavljivo: - Stopnja 1: 65 – 240 min⁻¹ - Stopnja 2: 130 – 480 min⁻¹ - Stopnja 3: 240 – 875 min⁻¹ - Stopnja 4: 480 – 1750 min⁻¹ - 3 pomiki: 0,1 / 0,2 / 0,3 mm/obrat - Iztegnjenost: 290 mm - Max. razdalja miza – vreteno: 620 mm - Okrogla miza z 2 T-utoroma: 450 mm - Nastavljiva višina preko zobate letve s ročnim ročajem - Pogon: 400 V / 0,9 / 1,5 kW - Potreben prostor (š x v x g): pribl. 660 x 1900 x 700 mm - Teža: pribl. 280 kg

Stanje: rabljeno, TECHNICAL DATA - Max. diameter: 68 [mm] - Number of tubes: 6 - Max. bar length: 4400 [mm] ACCESSORIES Fjdpfeuhbkcex Aflopb - Hydraulic tank

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 x bar feeder LNS Sprint 555 Year of manufacture: 2007 Bar diameter: 5 - 55 mm Bar length: 3,200 mm Previously installed on a Goodway CNC lathe. The bar feeder can be inspected at any time at our warehouse in Reichenbach. Fpjdpfx Aovt N Dyeflsb