Radialni vrtalni stroj

WMW MEUSELWITZ

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 500 mm Table size: 2230 x 670 mm Table clamping area: 1340 x 400 mm Magnetic chuck size: 1000 x 410 mm Table load capacity: 450 kg Spindle head overhang: max. 330 mm Grinding spindle speed: 1440 rpm Total power requirement: 18.2 kW Machine weight approx.: 3.5 t (machine only) Machine dimensions (LxWxH): approx. 1.9 x 3.3 x 2.25 m Control cabinet dimensions (LxWxH): 1.0 x 0.4 x 1.4 m Fedpfx Ajx Afpajhmogc Precision surface grinding machine Possible surface grinding operations: - Cross grinding; plunge grinding; face grinding and straight surface grinding Further information: - Hydraulic, stepless table speed 1...30 or 2...30 m/min - Maximum table stroke 1150 mm - Cross feed by hand 0.01 mm - Vertical infeed of grinding wheel by hand 0.002 mm; smallest incremental infeed 0.001 mm - Automatic infeed 0.001...0.1 mm - Maximum selectable total infeed 5.0 mm - Coolant system (tank with pump) - Hydraulic unit - Control cabinet

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Distance between centers: 850 mm Longitudinal travel (Z axis): 900 mm Cross travel (X axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x stepless rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X axis): 8 m/min Longitudinal travel (Z axis): 10 m/min Operating hours (machine on): approx. 34,600 h Tailstock taper ISO: MT 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions approx. (LxWxH): 2.2 x 3.2 x 1.9 m Multifix toolholder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Fedjwtct Hopfx Ahmogc Live center in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with internal jaws Various chuck keys Machine lighting 8x leveling pads 4x wedge lifters Various pairs of jaws 1x steady rest Ø 100 mm, closed type

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390/455 mm Transverse feed: 0.3–3.5 mm Longitudinal table travel: 1150 mm Table speed: 2.5–25 m/min Table size: 2120 x 600 mm Magnetic chuck size: 1000 x 315 x 100 mm Clamping area of the table: 1160 x 315 mm Grinding spindle infeed: 0.002–0.05 mm Distance from table to spindle center: max. 550 mm Spindle head overhang: 200–580 mm Grinding spindle speed: 1500 / 3000 rpm Total connected load: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 1.3 x 1.4 x 1.95 m Coolant system dimensions (LxWxH): 0.7 x 0.7 x 0.55 m Fgsdpfx Ahju Nggzemoc - Coolant system (tank with pump) - 2 grinding wheel arbors - 4 machine feet as per standard.

Leto izdelave: 1963, stanje: rabljeno, Technical Details: Ram Stroke - max.: 150 mm Workpiece Diameter - max.: 250 mm Slot Width: 50 mm Feed Rate: 10 m/min Stroke Adjustment: yes Supply Voltage: 380 V Work Table: Ø 250 mm Total Power Requirement: 6.0 kW Machine Weight approx.: 1.05 t Machine Dimensions (LxWxH) approx.: 1.2 x 0.8 x 1.6 m Application: For internal keyway machining of flanges Pull Broach Specifications: - Total Length = 650 mm - Width = 10; 20; 30; 50 mm - Pull Length = approx. 150 mm Lubrication is via the pull broaches. Equipment includes, for example: Fjdpfju Ng T Ujx Ahmsgc 4x various pull broach guides (5; 22; 32 and 50 mm) 50x various flange holders 23x broach holders, shank 18 mm; 12x shank 22 mm; 7x shank 26, 30, 40, and 45 mm including accessories, see photo for comparison As per description.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Fodpjuxfupsfx Ahmegc Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390 mm Fsdsu Ngn Sopfx Ahmjgc Table speed: 2.5–25 m/min Clamping surface of the table: 250 x 1000 mm Distance table to spindle centre: 550 mm Grinding wheel dimensions: max. Ø 315 x 13–63 x bore Ø 75 mm Control voltage: 220 V / 50 Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department.

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) Fedpfx Asr A Hcbjhmegc • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: rabljeno, Leto izdelave: 1983, Vrtalna zmogljivost v jeklu (-Ø 50 mm) Iztegnjenost 1500 mm Fgodpfxjtv Ikle Ahmoc Višina obdelovanca - maks. 1380 mm Vrtalna zmogljivost v litoželezu (-Ø 60 mm) Razdalja od središča vretena do stebra 320 - 1250 mm Območje nihanja +/- 180° Vpenjalna površina osnovne plošče 2640 x 1000 mm Navor na vretenu 310 Nm Premer vrtalnega vretena / vpenjalni stožec 75 mm / MK 5 Hod vrtalnega vretena 310 mm Hitrosti vretena 28 - 2500 min⁻¹ Pomik: 0,05 - 2 mm/obrat Moč pogona 4 kW Teža stroja pribl. 4,3 t Potrebni prostor pribl. 3,2 x 1 x 2,75 m Kockasta miza 500 x 500 x 500 mm,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Year of manufacture: 2004 Sauter 8-station turret VDI 20 + driven tool positions at all stations Spindle locking brake C-axis (interpolating) Reinforced coolant pump: 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color screen Work Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Center distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (DIN 55027) / MT 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in two gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Fgjdpfx Ajy Dckaehmec Feed force: 300 daN (X) / 600 daN (Z) C-axis: interpolating (included as an option) Tool Turret & Tailstock Turret: 8-position disk turret (Sauter), all stations driven Speed (driven tools): max. 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, MT 5 Dimensions & Capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10–115 mm Travelling steady rest with rollers, guide diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-change chuck with clamping lever, SSF 40/6 Ortlieb, collet 173 E Faceplate operation preparation, including speed monitoring with separately adjustable limit Tooling: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Low spindle run hours Available immediately.

Stanje: rabljeno, Leto izdelave: 2015, Širina ležišta 350 mm Dužina obrade 1.000 mm Upravljanje Manual plus 620 Heidenhain Prečnik obrte preko ležišta 430 mm Prečnik obrte preko ravnog vođstva 220 mm Opseg brzine glavnog vretena 1 - 3.600 min⁻¹ Pogonska snaga glavnog vretena 9 / 11 kW Maks. obrtni moment oko 200 Nm Glava vretena DIN 55027 / 6 Prečnik vretena u prednjem ležištu 110 mm Provrt vretena 80 mm Maksimalni prečnik upotrebljivog štapa 80 mm Sistem MultiFix Prečnik prihvatnog držača 20 x 20 mm x-os 230 mm Fjdpfxsyvkr As Ahmsgc z-os oko 1.000 mm Prečnik pinole 70 mm Hod pinole 150 mm Prihvat konja MK 5 Stalni otvor: 12 - 150 mm Promenljivi otvor: 12 - 125 mm Brzi hod X: 10 / Z: 7 m/min Sila posmaka X: 4 / Z: 5 kN Težina mašine oko 3,2 t Prostor za mašinu oko 2,8 x 2,1 x 1,9 m Ciklusno vođena strug mašina SEIGER - SLZ 420 E / 1000 - BEZ troviljastog stezna glava - Impulsno podmazivanje Protok: 0,1 l/min, Pritisak pumpe: 30 bar, Zapremina rezervoara: 2 dm³