Sesalnik/WIRBEL K 855 HP 7,5

Wirbel KH 855 HP 7,5

Stanje: novo, Film wrapping packaging machine Rotational speed continuously adjustable. Fodpfx Acod A Udnedegf Table diameter according to customer requirements. Manual or automatic unwinding. Various holders/accessories for a wide range of applications.

Leto izdelave: 2025, obratovalne ure: 4 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Fgjdpfx Acjmdn Trsdof Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Leto izdelave: 2024, stanje: novo, Universal Testing Machine H 5 TMNI (L) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to nominal load: Working space width: 420 mm Max. test stroke without test tools, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1325 mm Travel Speeds: Test speed: 0.001 – 1200 mm/min up to nominal load Return speed: 1200 mm/min Force Measurement: Measuring range depending on the force sensor used: 0.4 – 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Force measurement resolution depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this effort will be charged separately. Fsdpfsiq Hxvex Acdjgf Crosshead Travel Measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Stanje: novo, Leto izdelave: 2025, 3-segment folding machine with foot operation Fjdpfscudl Njx Acdegf EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding machine with foot operation, complete - Numerous bending options thanks to segment inserts in the upper, lower, and bending beams Boxes and special profiles with opposing bends can be fabricated with ease on this model - Our folding machine is a well-dimensioned, fully-welded construction with foot-operated upper beam positioning. This significantly streamlines and speeds up workflow, as both hands remain free for material insertion and alignment. - The easily and quickly adjustable bending angle stop ensures accurate and highly repeatable production of the required bending angle, even in large series production - Upper beam, lower beam, and bending beam all fully segmented (piano-type) - Segments are adjustable and removable - Precision-ground bending segments manufactured from extremely tough and hard special alloy steel - Bending beam is effortless to operate, equipped with heavy-duty pressure spring/spring damper - Heavy-duty and robust design for decades of continuous operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1,250 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 265 kg - Segment widths: 30, 40, 50, 60, 70 and 100 mm - All three beams equipped with segmented tooling (fully segmented) - Adjustable stop for preset bending angles - Angle scale - Material clearance: 100 mm Price: €5,400 Swivel castors included Delivery time: Every week on Monday/Tuesday Cash on delivery Delivery charge: €180 This type of folding bench is also available in a length of 1,400 mm. We look forward to your enquiry!

Stanje: dober (rabljeno), Leto izdelave: 2006, Compact and fast strapping machine with maximum package dimensions of approximately width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and simple spool change and threading system. - Sealing type: heat-sealing using heater blade technology. - Up to approx. 42 strapping cycles per minute. - Strap type: PP strap. - Adjustable strap width 5–9 mm (set to 5 mm). - Strap tension adjustable via control terminal. - Soft tension available. - Standby function / energy-saving mode. - Sturdy foot pedal. - Low-maintenance and low-wear strap frame. - Equipped with castors for mobility and lockable wheels. Fgedpfx Aepuy Itecdsf The machine can be demonstrated under power.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, največja širina izdelka: 400 mm, vhodna napetost: 230 V, Minipack Pratika 80 MPS Fgodpfxoyant Re Acdjf Minipack Pratika 80 MPS je popolnoma avtomatski pakirni stroj s stranskim varjenjem. Namenjen je izdelkom z največjo višino 360 mm in je primeren tudi za zelo dolge izdelke. – Popolnoma avtomatski stroj za pakiranje s stranskim varjenjem (neprekinjeno stransko varjenje) – Največja višina izdelka: 360 mm – Možne dolžine izdelkov nad 2 m – Uporaben dimenzija varilne letve: 700 mm – Največje dimenzije rolice folije: Ø 350 × 800 mm – Višina vstopnega traku: 915 mm – Dimenzije stroja (zaprt): 2.785 × 940 × 1.770 mm – Dimenzije stroja (odprt): 2.785 × 940 × 2.280 mm – Zmogljivost: do 3.000 paketov/h (odvisno od izdelka/folije)

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B Fedpfor Ix Igox Acdsgf The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines that utilize a powerful rotary arm in combination with a reliable pre-stretch system to achieve precise wrapping of pallets. This advanced technology allows the load to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with lightweight or unstable goods, as well as for loads that are difficult to maneuver. - Maximum product height: 2,000 mm Fsdpjr Nc Spjfx Acdegf - Maximum pallet dimensions: 1,200 x 1,200 mm - Minimum weight: 45 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Fully automatic flow wrapping machine for packaging products – regardless of their length – with complete wrapping and without film overlap. Product feeding is carried out via a conveyor belt while simultaneously enclosing the product in a center-folded film using a forming shoulder. Product indexing is achieved through a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is carried out by a continuous side sealing unit. The height position of the forming shoulder and sealing units can be manually adjusted. Fgodpfx Ajw U A Eqjcdef Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Technical data: Cross sealing bar: 450 mm Film: center-folded film, approx. 12–80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 120 mm Min. product width: 80 mm Pass-through height: 200 mm Working height: 780–930 mm Power supply: 400 V three-phase, 50 Hz, with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Tunnel pass-through width: 650 mm Tunnel pass-through height: 200 mm Inspection and demonstrations can be arranged by appointment at our premises. Functional guarantee, no warranty.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, For sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm (192 hooks) machines from 1999, 2000, and 2003, refurbished in 2024 to like-new condition. Fjdpfjv Hxq Asx Acdegf