Kopirna stružnica

WINTER KD-1500

Stanje: rabljeno, Skobelni stroj AD STÖ310V, zelo dobro ohranjen, 2,2 kW, dolžina mize 1800 mm, širina mize 310 mm, 4 noži, 300 kg Fpodex H Uc Tepfx Adksk Pridržujemo si pravico do spremembe cen, napake v tisku in sestavi so možne.

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Fedpfsk Sat Dox Adkspk Teža: 2,2 t Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Leto izdelave: 2000, Použitý soustruh CONDOR AC, čiastočne repasovaný Výška hrotu: 165 mm Vzdialenosť medzi hrotmi: 750 mm Priemer vretienového otvoru: 40 mm Fjdpfxox E Um Ne Adkopk Otáčky vretena: 22–2 800 ot./min plynule nastaviteľné - Rýchloupínací držiak Multifix, veľkosť B - Digitálny odmeriavací systém WEILER DZ-V - Priechodný doraz vretena - Pevná luneta - 7 kusov Multifix držiakov - Plochý ochranný kryt proti rozstrekovaniu - Elektricky istený kryt skľučovadla - Prevodové kolesá a rôzne upínacie čeľuste Stroj je čiastočne repasovaný: - Lôžkový suport: Vodiace dráhy nanovo potiahnuté a zaškrabané, klinové lišty a upínacie lišty prispôsobené - Priečny suport na ložiskovom suportoch zmeraný a nastavený. Priečny suport s rybinovým vedením novo zaškrabaný, kliny prispôsobené a zaškrabané - Horný suport novo zaškrabaný, klinová lišta prispôsobená - Všetky odmeriavacie pravítka repasované, káble vymenené Stroj sa nachádza v našom showroome v 71334 Waiblingen-Beinstein a je ihneď k dispozícii. Ohľadom vybavenia nás prosím kontaktujte.

Stanje: rabljeno, Panel saw and spindle moulder Robland NLX1700, very good condition, 2 x 3 kW motors, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Fpsdpjwzzh Esfx Adkjk Price subject to change. Errors, misprints, and omissions excepted.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. Fpedpswrm Dtofx Adkjk For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Fsdpfx Adjhbu E Hjkopk Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.

Stanje: rabljeno, Poravnalni skobeljni stroj: delovna širina: 520 mm, dolžina mize: 2200 mm, premer vretena: 120 mm, število nožev: 4 kos. Debelinski skobeljni stroj: mere mize: 520 x 850 mm, hitrost podajanja: 6,5 - 17 m/min. Lokacija skladiščenja: Dobavitelj Fsdpfxoy Tpzqs Adkspk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Fpsdpsu Tuk Hefx Adkok >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, OMA 600 Avtomatski stružnica za les, z podajalnikom Fodpfx Aderfh D Iekepk Skupne dimenzije: 170 x 110 x v. 190 cm Približna teža: 1500 kg

Stanje: zelo dobro (rabljeno), Surface Planer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence (tiltable), dimensions 1500x175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. depth of cut: 8 mm Extraction port: Ø 120 mm Table height: 860 mm Hydraulic table lifting/lowering with foot pedal Digital cutting depth display Noise-reducing combs on the cutterhead Star-delta starter Emergency stop button CE compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Fodpfxey Emf Rj Adkjpk Weight approx. 900 kg Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – free loading! • Machine has been cleaned and function-tested. • All machines are sold as seen and inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We answer inquiries only with your address and telephone number!)