5-osni obdelovalni center

WILLEMIN MACODEL W 408 B

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Hnsdpswv Hnmefx Abxsn Rated torque (100%): 8 Nm Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Hnedpowdmy Ssfx Abxsn Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 1 MAIN SPINDLE - Max. bar diameter: 23 mm - Minimum C-axis resolution: 0.001° TURNING-MILLING SPINDLE - Travel X/Z: 250/300 mm - Travel Y: 200 mm - B-axis stroke: -15/+100° - Minimum B-axis resolution: 0.001° - Tool type: HSK E40 Hedpevh I Ugefx Abxjnn - Spindle speed: 30,000 rpm - Spindle drive power: 10 kW TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 1,700 kg ACCESSORIES - Control system: NUM 1050 - Coolant tank * Internal coolant supply (ICS) - Oil mist extractor: Elbaron RON/A 60 - Coolant container: MARKSA CSW100 - System for 6th side machining - Bar magazine: Willemin - Collet chuck

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Hjdpfx Asr Urm Sobxonn Werkzeugvermessung auf dem Tisch wird geliefert, Die von Hand gezeigten Teile werden nicht mitgeliefert.

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Hodpeuddimjfx Abxsnn Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Stanje: dober (rabljeno), Leto izdelave: 2013, Obdelovalni center Fanuc Robodrill α-D21SiA5 Hnjdsx Hqwajpfx Abxjn Proizvajalec: Fanuc Tip: Robodrill α-D21SiA5 Leto izdelave: 2013 Osi: 5 Pomik osi X: 300 mm Pomik osi Y: 300 + 100 mm Pomik osi Z: 330 mm Zasuk osi A: -90° – +90° Vrtljiva os C: 360° Največja nosilnost mize: 200 kg Največji premer orodja: 40 mm Največja teža orodja: 3 kg Največja skupna masa orodij: 33 kg Število orodij: 21 Hitrost vretena: 24 000 vrt/min Za pravilnost, popolnost in ažurnost podatkov ne odgovarjamo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Mori Seiki NL2500Y/700 CNC stružnica Leto izdelave: 2007 Krmilnik: MORI MSX-850 III Glavno vreteno: Vretenovski nos: A2-8 Pogon glavnega vretena: 18,5 kW Največja hitrost glavnega vretena: 4000 min⁻¹ Največji premer izvrtine vretena: 80 mm Maks. premer obdelave: 366 mm C-os: 0,001° REVOLVERSKA GLAVA: Število pozicij: 12 Število pozicij za gnana orodja: 12 Minimalni zasuk revolverske glave: 0,001° Hoda osi X/Z: 280 / 785 mm Hod osi Y: ±50 mm Največja hitrost gnanih orodij: 6000 min⁻¹ Moč gnanih orodij: 5,5 kW KONICA: Stožec: MT5 Razdalja med konicama: 705 mm ELEKTRIČNI PRIKLOP: Skupna priključna moč: 39 kVA TEŽA IN DIMENZIJE: Zahtevani prostor: 3800 x 2143 mm Višina stroja: 2232 mm Teža stroja: 6100 kg Pribor/možnosti: - 2 omari za pribor - 5 gnanih nosilcev orodij, več stoječih nosilcev - napenjalne puše, vstavki, orodja, tulec itd. - visokotlačni papirni tračni filter, mikro filtracija, rezervoar za hladilno sredstvo - transportni trak za odrezke - vpenjalni tulec različnih dimenzij - Kitagawa hidravlična 3-čeljustna glava, premer 210 mm Hnodpjyxpprsfx Abxen - Komplet dokumentacije - Lovilec obdelovancev Pod napetostjo v našem skladišču. Video na zahtevo!

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Hsdpfx Ajufp Svjbxonn

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Hsdpfet Hwucox Abxjnn Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, vrtilni razpon: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Milling head clamping range: 360 x 1° • Milling head swivel range: 180 x 1° • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Intermittent: 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Hnodpoxgq Ayjfx Abxen Coolant system • Tank capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhaul - CNC control upgrades ----- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large component machining - large machining - CNC large-part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine