CNC stružno-rezkalni center
WFL M60/2000

Leto izdelave

2004

Stanje

Rabljeno

Lokacija

Linz

CNC stružno-rezkalni center WFL M60/2000

Prikaži karto

Podatki o stroju

Oznaka stroja:: CNC stružno-rezkalni center

Proizvajalec:: WFL

Model:: M60/2000

Leto izdelave:: 2004

Stanje:: generalkompletno obnovljen (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Linz, Avstrija

Pokliči

Tehnične podrobnosti

Stružna dolžina:: 2.260 mm

Premer struženja nad prečnim suportom:: 690 mm

Premer struženja:: 690 mm

Moč vretenovega motorja:: 40.000 W

Največja hitrost vretena:: 3.300 obr/min

Izvrtina vretena:: 115 mm

Potovalna razdalja osi X:: 700 mm

Pomik osi Y:: 300 mm

Pomik po osi Z:: 2.260 mm

Vrtljajska hitrost (min.):: 4.000 obr/min

Zunanji premer vpenjalne glave:: 500 mm

Nos vretena:: A11

Premer nihanja nad prečno desko:: 690 mm

Dolžina orodja:: 500 mm

Sila podajanja os X:: 20.000 N

Pogonska sila Y-os:: 20.000 N

Podajalna sila osi Z:: 20.000 N

Oprema:: vrtilna hitrost brezstopenjsko nastavljiva

Podrobnosti ponudbe

ID oglasa:: A21512922

Posodobitev:: nazadnje dne 16.03.2026

Opis

Completely overhauled 5-axis CNC turning, drilling, and milling center WFL M60 Millturn/2000mm with Siemens Sinumerik 840D PL control unit, year of manufacture 2004. The machine has been fully refurbished, tested, and is fully operational. The turning-drilling-milling unit and tailstock have been completely rebuilt. Milling spindle and bearings are new. Electrical wiring and hydraulic hoses have also been replaced. The machine geometry corresponds to that of a new machine (with inspection protocol). The machine is equipped with a tailstock and steady rest slide (both with automatic positioning and extremely stable hydraulic clamping to the bed). Chuck and steady rest can be supplied as per customer requirements (procured new). Maximum chuck diameter: 500mm, maximum steady rest opening: 380mm. Tool system HSK100 (external magazine with 90 slots and automatic tool changer). The machine is equipped with scales on all linear axes. Additionally, the machine features an 80 bar deep drilling pump and a feed force of 2t in X, Y, and Z axes. The B-axis is programmable in 0.001° increments and features an additional mechanical indexing system with extremely high holding and swiveling torque. Installation and commissioning as well as operator and programming training can be offered. Exterior paintwork can be customized to customer requirements if needed.

Main spindle: 40kW (S1)
Milling spindle: 25kW 4000rpm
Tool system: HSK100
Ihodpfx Asyuu A Iedksw
Magazine: 3 x 30 slots

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2024

1 Oglas na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+43 664 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Linz

241 km

CNC center za struženje in rezkanje
WFL Millturn Technologies GmbH & Co. KGM60-G MILLTURN 2000mm

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Ihodju Hl R Topfx Adkew Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Poglej podrobnosti

Mali oglas

Cilindrični brusilni stroj cnc STUDER S242

Contamine-sur-Arve

667 km

Cilindrični brusilni stroj cnc
STUDERS242

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Distance between centers: 400 mm - Usable diameter: 180 mm LINEAR AXES - Travel X1 and X2 x Z: 220 mm - Travel Z: 850 mm - Resolution X x Z: 0.0001 mm TURRET: - Number of fixed positions: 12 - Tool holder: VDI30 GRINDING WHEEL HEADSTOCK - External grinding right: * Grinding wheel dimensions (Ø x width x bore): 400 x 50 x 127 mm * Drive power: 6.8 kW WORKPIECE SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - Taper type: MT4 - Drive power: 10.5 kW - C-axis: 0.001° SYNCHRONIZED COUNTER SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - C-axis: 0.001° - Internal taper: MT4 - Micrometric adjustment: +/- 40 micron - Drive power: 10.5 kW POWER SUPPLY - Capacity: 45 KVA DIMENSIONS - Space requirement: 2,800 x 3,960 mm - Machine weight: 7,600 kg OPERATING HOURS - Power-on hours: 57,000 h ACCESSORIES - CN FANUC 310i-modelA - StuderWIN software - RS232 / USB interface - Remote electronic handwheel - Turret head with automatic length calibration Renishaw LP2 - Marposs diameter probe (multi-range) + Z4-axis for positioning - Semi-automatic balancing of the grinding wheel MPM.3 BMT100 M.24 - Coolant tank 480 L * with paper filter * with magnetic filter - Chip conveyor Iodpfx Adovxw A Uskshw - Mist extraction - Cooling unit for grinding wheel motor - Electronic contact detection Dittel AE6000 - Stationary dressing device on the workpiece spindle stock - Control cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Poglej podrobnosti

Oglašujte tukaj