Horizontalni obdelovalni center

WELE HMC 500

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 640 mm, pomik osi Y: 610 mm, pomik po osi Z: 680 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, hitrost podajanja osi Y: 6 m/min, nazivna (navidezna) moč: 40 kVA, proizvajalec krmilnikov: Fanuc, model krmilnika: OiMF, obremenitev mize: 500 kg, vrtljajska hitrost (min.): 40 obr/min, največja hitrost vrtenja: 15.000 obr/min, skupna masa: 11.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.000 W, število vreten: 1, število mest v zalogovniku orodij: 60, dolžina orodja: 400 mm, vhodna napetost: 220 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Very well-maintained Wele HMC500 for sale. The machine was professionally inspected and disassembled by JKET/Wele factory service technicians in week 48. It is securely packaged and ready for collection; commissioning by JKET/Wele is available at an additional cost. Control on: approx. 25,000 hours Machine on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle on: approx. 8,500 hours Drive on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Includes probe Includes 4 pcs. SK40 tool holders (1x probe, 3x tools) Only aluminium has been machined on this machine. Machine is sold including: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001 degrees - 2 pallet towers, each with 4 sides, and 3 Lang Quick Point long-stroke clamps per side - Chip conveyor and chip bin included - Coolant tank (500 litres) and oil separator included Traversal speeds: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Including frequency converter 500-litre coolant tank Oil cooler Only aluminium has been machined on the machine Bdodjxyuvqjpfx Afqsk All manuals available

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 205 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Bdodewcg Tiepfx Afqok - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 1 [degree] - Number of toolholders: 1 TOOLHOLDER 1 - Number of stations: 12 - Number of driven stations: 8 - Driven tool speed: 7,000 [rpm] FRONT TOOL POST - Number of stations: 7 SUBSPINDLE TOOL POST - Number of stations: 8 - Number of driven stations: 8 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 7 [kW] WEIGHT AND DIMENSIONS - Footprint: 2334 x 1200 [mm] - Machine height: 1700 [mm] - Machine weight: 2600 [kg] OPERATING HOURS - Hours under power: 57,342 [h] - Operating hours: 31,575 [h] - Spindle hours: 24,829 [h] EQUIPMENT - Control unit: Fanuc 31i-B - Driven guide bushing - Chip conveyor - Part removal unit - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 - Electrical transformer

Stanje: dober (rabljeno), Leto izdelave: 2012, 900 mm premer vrtenja, 650 mm največji obdelovalni premer, 992 mm največja dolžina struženja, 1500 min⁻¹ vretena, 165 mm kapaciteta palice, Bdodpfxswnfzce Afqsk 10-pozicijski revolverski glavni nosilec, 45 kW motor vretena, krmilje FANUC, 3-čeljustna hidravlična vpenjalna glava, konjiček, transportni trak za odrezke, hladilni sistem.

Stanje: rabljeno, Leto izdelave: 2014, DMC DL 80V CNC Vertical Turning Machine Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kW, 2000 rpm spindle 12-position turret Bdsdpfxovr Ecps Afqek 21" chuck Fanuc Oi-Td control Machine weight: 9,800 kg Complete with chip conveyor and standard accessories

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm Bedefg Rldspfx Afqodk • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 780 mm, premer struženja: 270 mm, moč vretenovega motorja: 15 W, potovalna razdalja osi X: 195 mm, pomik osi Y: 120 mm, pomik po osi Z: 780 mm, CNC Lathe Nakamura-Tome WT-300 Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacity: Max swing diameter on upper/lower turret: Ø 310 mm (both upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter main spindle / sub-spindle: Ø 270 mm Max turning length: 780 mm Bar capacity main spindle / sub-spindle: Ø 65 mm Axis travels: Axis X1 / X2: 195 mm Axis Y: 120 mm (±60 mm) Axis Z1 / Z2: 780 mm Axis B: 850 mm Axis C: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Spindle motor power (cont./30 min): 11/15 kW (both spindles) Bedpowx Hicofx Afqodk Turret No.1 & No.2 (identical): Tool positions (static / driven): 24 positions (12 driven) Driven tool speed: 3,600 rpm Driven tool motor power: 3.7 / 5.5 kW Turning / boring tool dimensions: 25×25 mm / Ø 32 mm Rapid traverses: Axis X1 / X2 / Y: 16,000 mm/min Axis Z1 / Z2: 24,000 mm/min Axis B: 36,000 mm/min Axis C: 100 rpm Axis B: 27,000 mm/min Included accessories: LNS MOVE bar feeder (2,300 mm length capacity) Chip conveyor Coolant collection tank with wash pump High-pressure pump with external coolant tank Various fixed and driven toolholders Tool presetting arm with dual RENISHAW probe heads Part unloading arm Manuals, electrical diagrams and CE Declaration

Stanje: rabljeno, Leto izdelave: 2015, TAKISAWA TS4000YS leto 2015 CNC krmilje FANUC 32i-MODEL B Maks. premer struženja 315 [mm] Maks. zamah nad ležiščem 600 [mm] Maks. dolžina struženja 735 [mm] Pomik osi X 267 [mm] Bdsdpswq Sf Tofx Afqok Pomik osi Z 840 [mm] Pomik osi Y -50 [mm] / +70 [mm] Pomik osi A 780 [mm] Hitro pomikanje os X 30000 [mm/min] Hitro pomikanje os Z 30000 [mm/min] Hitro pomikanje os Y 10000 [mm/min] Hitro pomikanje os A 30000 [mm/min] Vretenasta glava A2-8" Maks. premer palice 82 [mm] Prehod vretena 94 [mm] Maks. hitrost vretena 4200 [vrt/min] Moč vretena 22 [kW] Kontra vreteno F140 Prehod kontra vretena 53 [mm] Maks. hitrost kontra vretena 6000 [vrt/min] Moč kontra vretena 11 [kW] Maks. presek nosilca orodja 25 [mm] Število orodnih postaj 15 Število pogonjenih orodnih postaj 15 Maks. hitrost pogonjenih orodij 6000 [vrt/min] Kapaciteta rezervoarja za mazanje 370 [l] Skupna potrebna moč 37 [kVA] Napajalna napetost 400 [V] Transporter za odrezke z obdelovalnim strojem 5 pogonjenih držal orodij Teža 6700 [kg]

Stanje: rabljeno, Leto izdelave: 2004, x-hod 3.000 mm y-hod 1.000 mm z-hod 860 mm Krmilnik Heidenhain iTNC-530 Bedpowqr Nlsfx Afqsdk Velikost mize 3.600 x 1.050 mm T-utori 7 x 18 mm Razdalja med T-utori 125 mm Razdalja miza-spodnji rob vretena 25–366 mm Obremenitev mize 4.200 kg b-os +-105° c-os +-360° Hitri pomiki x/y/z 30.000 mm/min Premer vrtljive mize 1.000 mm Maks. premer vrtenja 1.400 mm Hitrost vretena 9.000 min⁻¹ Vpenjalna glava ISO-50 DIN 69871-AD Motor vretena 28,5 kW Navor na vretenu 240 Nm Menjalnik orodij AITEK, 40 pozicij Najv. teža orodja 20 kg Ročno kolo vklj. Nihajno delovanje vklj. Transporter ostružkov vključen Notranje hlajenje, dovod 20 bar Skupna priključna moč 65 kW Teža stroja cca 24,8 t Prostorske zahteve cca 8.056 x 5.496 x 3.790 mm

Stanje: dober (rabljeno), Leto izdelave: 2014, x travel: 730 mm y travel: 730 mm z travel: 880 mm Pallet size (2x): 500 x 500 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Distance spindle center to table: 80 - 810 mm Milling spindle drive: 30 kW Max. torque: 102 Nm Max. workpiece weight: 500 kg Max. workpiece diameter on the pallets: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 sec Max. feed rate: 60,000 mm/min Rapid traverse: 60 m/min Tool changer, number of tools: 40 Max. tool diameter: 110 mm Max. tool diameter with adjacent pocket empty: 320 mm Max. tool weight: 30 kg Chip-to-chip time: 4.4 - 10 sec Tool-to-tool change time: 1.95 sec Operating hours: 15,894 h Total power consumption: 46 kVA Machine weight approx.: 15 t Space requirements approx.: 5.5 x 3 x 2.8 m Well-maintained horizontal machining center DMG-Mori, Model NHX 5000, year of manufacture 2014, equipped with Siemens 840D CNC control, two pallets, and 40-position tool changer. Displayed operating hours: 23,262; only 15,894 spindle hours! Further data: Distance spindle nose - table center: 70 - 950 mm Pallet indexing time: 1.3 sec B-axis indexing (table): 360 x 1 degree Creep feed rate: 0 - 5,000 mm/min This is a used machine, therefore we sell under exclusion of any warranty. Bdedpev Htitofx Afqsk STOCKING DEALER WITH OWN 1,600 m² WAREHOUSE

Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm Travel distance - Y: 450 mm Travel distance - Z: 510 mm Control: HEIDENHAIN TNC620 Table dimensions (L x W): 1,000 x 450 mm Number of tool changer positions: 30 Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. Bodpfx Afewq S Aloqjdk A video of the machine at its current location is available upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500